Indian Society for Heat and Mass Transfer

图书馆订购 Guest
主页 旧刊 有关人员 未来大会
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017)

ISSN: 2688-7231 (Online)


T S Prasanna Kumar
PES University

Nikhil Mahalingesh
PES Institute of Technology

S Prajwal
PES Institute of Technology

Noel Godwin Saldanha
PES Institute of Technology

T.R. Seetharam
National Institute of Engineering, Mysore 570 008, India; Department of Mechanical Engineering, PES University-560085, India

K. N. Seetharamu
Department of Mechanical Engineering, PES University, 100 feet ring road, Bengaluru 560085, Karnataka, India

DOI: 10.1615/IHMTC-2017.2050
pages 1481-1486


Thermal contact conductance (TCC) at the interface of two nominally flat surfaces is studied using inverse heat conduction analysis based on transient heat flow. Near-surface temperatures along the lateral surface of cylindrical stainless steel specimens with different surface roughness values (0.9 - 6.9 µm) were measured for a range of contact pressures varying from 0.9 MPa to 1.7 MPa and used as input for the estimation of surface temperatures at the contacts and the heat flux across the gap. The analysis was carried out by finite element method. The resulting temperature profile very near the contact on either side suggests a gradual change in temperature as against a linear distribution reported in the literature. Based on the results of the numerical analysis, the effects of surface roughness and interface pressure on thermal contact conductance is studied.

Purchase $25.00 Check subscription 发布道德准则和不当行为 推荐给我的图书馆员 此页放入书签