Indian Society for Heat and Mass Transfer

图书馆订购 Guest
主页 旧刊 有关人员 未来大会
Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017)

ISSN: 2688-7231 (Online)


Shankar Singh Kaira
Dept. of Mechanical and Aerospace Engineering IIT Hyderabad

Anil Bhauro Wakale
Dept. of Mechanical and Aerospace Engineering IIT Hyderabad, India- 502285

Raja Banerjee
Department of Mechanical and Aerospace Engineering, Indian Institute of Technology Hyderabad, Yeddumailaram, Telangana 502205, India

DOI: 10.1615/IHMTC-2017.1600
pages 1145-1151


Three-dimensional simulations were conducted to study combustion inside a direct injection diesel engine. A complex physical phenomenon of spray and fuel combustion interaction experienced in IC engine. This spray-combustion interaction was evaluated by Spray penetration length and lift-off length of flame. To study this interaction, constant volume chamber simulations with engine-like conditions were conducted. These simulations were conducted to mimic the experimental results of ECN at Sandia national laboratory for n-heptane as a surrogate fuel. After this validation, in-cylinder combustion model was validated against in-house experimental results. Only the closed part of the engine cycle (inlet valve closing to exhaust valve opening) is modeled. A flamelet based model with 106 species skeleton mechanism was used to validate lift-off length and in-cylinder combustion. The numerical results for spray penetration and lift-off length showed good agreement with experimental results. For diesel engine simulation was validated for pressure trace and NOX. The results are in good agreement with experimental results with very less error percentage. A parametric study was then done for different SOI and the pressure trace and NOX results are compared with in-house experimental results. Turbulence modeling was performed using the standard k-ε model.

Purchase $25.00 Check subscription 发布道德准则和不当行为 推荐给我的图书馆员 此页放入书签