Indian Society for Heat and Mass Transfer
DIGITAL LIBRARY

图书馆订购 Guest
主页 旧刊 有关人员 未来大会

PARAMETRIC INVESTIGATION OF THERMOHYDRAULICS FOR A PCM BASED HEAT SINK

Ranjan Prasad Diwakar
Department of Mechanical Engineering National Institute of Technology Warangal, Warangal, India

D. Jaya Krishna
Department of Mechanical Engineering National Institute of Technology Warangal, Warangal, India

DOI: 10.1615/IHMTC-2017.1180
pages 833-841

摘要

This paper presents the numerical investigation of a PCM (Phase Change Material) based longitudinal fin heat sink. Paraffin RT44HC is used as a PCM. The fins and the base of the heat sink are made up of aluminum. Fins are taken as an integral part of the heat sink. Volume of fluid (VOF) model has been employed to simulate the melting behavior of the PCM. The temperature variation at the base of the heat sink, fin symmetry and PCM plane of symmetry are studied along with melt fraction and phase distribution contours. Then, the parametric study has been carried out by varying height of the fin, thickness of the fin, thickness of the base, number of fins and power input. It is observed that operational time strongly depend on number of fins, fin thickness, fin height and difference between critical temperature and melting temperature of PCM. Further, Taguchi method has been used to reduce the number of simulations in finding the best configuration with maximum operational time. By considering critical temperatures of 54.8 °C, 63 °C and 72.6 °C, the heat sink configuration with maximum operational time has been obtained.

Purchase $25.00 Check subscription 发布道德准则和不当行为 推荐给我的图书馆员 此页放入书签