Library Subscription: Guest

ISSN Online: 2688-7231

ISBN Online: 978-1-56700-524-0

Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India
December, 17-20, 2021, IIT Madras, Chennai, India
Gain Access(open in a new tab)
Preface Scientific Advisory Committee Conference OfficersIt's a pdf file. (open in a new tab) Table of Content

Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India

Table of Contents:

A Numerical Method to Optimise Warm-up Time of Thick Film Platinum Heaters by Designing Applied Voltage Profile Sreejith S. Pillai, Geetika Srivastava, Nithila Rai, Kumara M., Sudhir S. Kamble, J. K. Radhakrishnan pages 1-7 DOI: 10.1615/IHMTC-2021.10
Comparison of wake characteristics behind a custom designed airfoil performing different types of flapping oscillations V K Vineeth , Devendra Kumar Patel pages 9-14 DOI: 10.1615/IHMTC-2021.20
Direct Contact Membrane Distillation Coupled with Solar Collector: A Numerical Study Dheeraj Chamoli, Kapil Garg, Himanshu Tyagi pages 15-21 DOI: 10.1615/IHMTC-2021.30
Experimental investigation on effect of wettability pattern in the condensation heat transfer performance of vertical square aluminium tube Lalu Uppumthara, Jyothish Abraham, Muhammed Arif M, G. Venugopal, M. R. Rajkumar pages 23-29 DOI: 10.1615/IHMTC-2021.40
Natural Convection in a Porous Trapezoidal Enclosure with Non-uniform Heating V. M Vijaya Kumara , Aswatha, K. N. Seetharamu pages 31-38 DOI: 10.1615/IHMTC-2021.50
FORCED AND MIXED CONVECTION EFFECT OF Al2O3/WATER NANOFLUID ON THE CONJUGATE THERMAL PERFORMANCE OF STEPPED LID-DRIVEN CAVITY UNDER TURBULENT FLOW CONDITIONS Naveen Janjanam, Rajesh Nimmagadda pages 39-45 DOI: 10.1615/IHMTC-2021.60
Numerical Study of Methanol Steam Reformation in a Micro-Solar Thermal Collector for Producing Hydrogen Gunjan Gupta, Himanshu Tyagi pages 47-52 DOI: 10.1615/IHMTC-2021.70
Effect of mass ratio on the response of an upstream truncated circular cylinder Pavan Kumar Yadav, Subhankar Sen pages 53-57 DOI: 10.1615/IHMTC-2021.80
Impact of flow direction and mass flow rate on the melting process for simultaneous charging and discharging based latent heat storage system Sandip Khobragade, Jaya Krishna Devanuri pages 59-64 DOI: 10.1615/IHMTC-2021.90
Heat Transfer Coefficient of Water Wall for Commercial Circulating Fluidized Bed Combustion (CFBC) boilers S.Naga Kishore, T.Venkateswara Rao, M.L.S.Deva Kumar pages 65-70 DOI: 10.1615/IHMTC-2021.100
Microscopic Heat Transfer Mechanisms associated with Single Bubble-based Pool Boiling of SiO2-water Nanofluids on Hydrophobic surface Prasad Kangude, Atul Srivastava pages 71-76 DOI: 10.1615/IHMTC-2021.110
Heat Transfer Augmentation with Thermal Energy Storage System in Paraffin Wax, Using Al2O3 Nanomaterial Vaibhav Talandage, Ashok T. Pise, Avinash Waghmare pages 77-83 DOI: 10.1615/IHMTC-2021.120
Entropy Generation due to Natural Convection from a Pair of Two Tilted Square Cylinders Subhasisa Rath, Gloria Biswal pages 85-90 DOI: 10.1615/IHMTC-2021.130
Turbulent Characteristics of Coaxial non-reacting Offset Jets M. K. Chithramol , G. Venugopal, M. R. Rajkumar pages 91-96 DOI: 10.1615/IHMTC-2021.140
Computational Analysis of Horizontal type Mixed Mode Forced Convective Solar Dryer Mayuresh Kulkarni, D.V.N. Lakshmi, A. Satheesh pages 97-103 DOI: 10.1615/IHMTC-2021.150
Heat Transfer Enhancement of Horizontal Wing Cut Using Concentric Tube A.P. Sivasubramaniam, K. Mayilsamy, P. Murugesan pages 105-110 DOI: 10.1615/IHMTC-2021.160
MATHEMATICAL MODELLING OF FRICTIONAL HEATING IN RECIPROCATING SLIDING CONDITIONS Anandu Raj, P.L Shajal , D Sreelal, P.S Yedukrishnan , Thettanikkal Viswanathan Harish pages 111-116 DOI: 10.1615/IHMTC-2021.170
Numerical Simulation of Latent Heat Thermal Energy Storage Incorporated Solar Water Heater Abhishek Singh Kashyap, Himanshu Tyagi pages 117-123 DOI: 10.1615/IHMTC-2021.180
Aerothermodynamic of Drag by Using Spike and Counter-flow Jet Techniques in Reacting Hypersonic Flows Topiwala Adit Dharmesh, Inzamam Ul Hussain, Shailendra Kumar, Vinayak Kulkarni pages 125-131 DOI: 10.1615/IHMTC-2021.190
Heat transfer enhancement using multi jet impingement with and without rotation T Mithun, Kumar A B Nidhish , M. R. Rajkumar, D Dilip pages 133-139 DOI: 10.1615/IHMTC-2021.200
Experimental and numerical investigation of the influence of geometrical parameters on the performance of plate heat exchangers Nitesh K. Panday, Shailendra Narayan Singh pages 141-147 DOI: 10.1615/IHMTC-2021.210
Convective Heat Transfer Enhancement by Array of Jets Impingement Sanjay D. Barahate, P. A. Rajiwade pages 149-152 DOI: 10.1615/IHMTC-2021.220
Lab level testing and ballistic performance analysis of a LO2/HTPB+20%Al hybrid motor configuration Dr. Krishnan Hrisheekesh, Sujithkumar R, Jaivishnu K. S, Ravi S, Aravindakshan Pillai, Lazar T Chitilappilly pages 153-159 DOI: 10.1615/IHMTC-2021.230
Numerical investigation of sonic injection into supersonic crossflow through different injectors operating at varying dynamic pressure ratios Anand Raj Hariharan pages 161-167 DOI: 10.1615/IHMTC-2021.240
Hydrodynamic Performance Investigation of Horizontal Axis Water Rotors Vimal K. Patel, K. Bheemalingeswara Reddy, Vikram Rathod, Ravi Patel pages 169-174 DOI: 10.1615/IHMTC-2021.250
Numerical Investigation of Energy Deposition based Drag Reduction Technique for Reacting Flows Inzamam Ul Hussain, Topiwala Adit Dharmesh, Shailendra Kumar, Vinayak Kulkarni pages 175-180 DOI: 10.1615/IHMTC-2021.260
Experimental Analysis of the Post Dryout Flow Regimes Encountered during Rewetting by Bottom Flooding using High Speed Chrono-photography Gayatri Paul, Prasanta Kumar Das, Indranil Manna pages 181-186 DOI: 10.1615/IHMTC-2021.270
On Drag and Heat flux by Integration of Cavity and Counter-jet in Reacting Non-equilibrium Flows Topiwala Adit Dharmesh, Hidam Nganthoiba Singh, Shailendra Kumar, Vinayak Kulkarni pages 187-193 DOI: 10.1615/IHMTC-2021.280
Effect of Thermal Buoyancy on a Fluid Flow across Six Inline Square Heated Cylinders Ravibala Patil, Chandrashekhar Sewatkar pages 195-201 DOI: 10.1615/IHMTC-2021.290
An analytical study to investigate the effect of partial loss of coolant from the vicinity of nuclear fuel plate Ritam Pal, Achintya Mukhopadhay, Koushik Ghosh pages 203-208 DOI: 10.1615/IHMTC-2021.300
Management of Thermal Runaway in Batteries using Water Mist for Air Precooling Aritra Jana, Ranadip Saha, Samriddha Ray, Debamita Pal, Sourav Sarkar, Achintya Mukhopadhyay pages 209-215 DOI: 10.1615/IHMTC-2021.310
Forced Convection from Chains of Spheres Anshuman Varma, Preeti Suri, Swati A. Patel pages 217-222 DOI: 10.1615/IHMTC-2021.320
Boiling Heat Transfer Study on Curved Surface Chandan Swaroop Meena, Sanghati Roy, Arup Kumar Das pages 223-229 DOI: 10.1615/IHMTC-2021.330
CFD simulation of inside room with rooftop enveloped radiative cooler Jay Prakash Bijarniya, Jahar Sarkar pages 231-236 DOI: 10.1615/IHMTC-2021.340
Effect of leading edge bluntness on the interaction of laminar boundary layer with induced shock wave Keshar Kashyap, Shailendra Kumar, Vinayak Kulkarni pages 237-242 DOI: 10.1615/IHMTC-2021.350
Spectrally selective multi-functional floating absorber with heat localization, 2-D water transport and improved evaporation potential for enhanced freshwater productivity Geo Sebastian, Shijo Thomas pages 243-249 DOI: 10.1615/IHMTC-2021.360
Numerical analysis of spiral channelled cooling plates for thermal management of pouch battery module Kokkula Monika, Chanchal Chakraborty, Sounak Roy, Srikanta Dinda, Satyapaul A. Singh, Santanu Prasad Datta pages 251-256 DOI: 10.1615/IHMTC-2021.370
Natural Convection from a Confined Sphere in Yield stress Fluids Soumya Nalluri, Preeti Suri, Swati A. Patel, Raj P. Chhabra pages 257-263 DOI: 10.1615/IHMTC-2021.380
A Real Gas Property-Based Thermodynamic Investigation of Ejector Based Refrigeration System for Automotive Applications Ronanki Suresh, Santanu Prasad Datta pages 265-270 DOI: 10.1615/IHMTC-2021.390
Investigation of heat transfer and fluid flow characteristics of optimised drop shape pin fin heat sink under natural convection Ram Deshmukh, Vaijanath N. Raibhole pages 271-277 DOI: 10.1615/IHMTC-2021.400
Performance Investigation of Waste Heat Assisted and Evacuated Tube Collector based Solar Still S. K. Singh , S. C. Kaushik, S K Tyagi pages 279-284 DOI: 10.1615/IHMTC-2021.410
Modelling and control of parabolic trough field system for feed water heating application Saroja Ranjan Pattanayak, Paladugu Venkaiah, Bikash Kumar Sarkar, Bikash Pattanayak, Harish Chandra Das pages 285-290 DOI: 10.1615/IHMTC-2021.420
Three-Dimensional Simulations of Bubble Rise in a Sinusoidal Channel Vivek S, Amaresh Dalal pages 291-297 DOI: 10.1615/IHMTC-2021.430
Exploration of Fractal Patterns in Cold Plate Flow Path Design to Enhance the Heat Transfer Performance of IC Chips Mayank Kumar Gupta, Tapano Kumar Hotta pages 299-304 DOI: 10.1615/IHMTC-2021.440
Solar Drying Characteristics of Grapes Using a Heat and Mass Transfer Based Mathematical Model S. P. Komble, G.N. Kulkarni, Chandrashekhar Sewatkar pages 305-310 DOI: 10.1615/IHMTC-2021.450
Investigation of counter flow vortex tube with insulation and its effects on the thermal performance using a computational fluid dynamic approach Ravi Kant Singh, Achintya Kumar Pramanick, Subhas Chandra Rana pages 311-316 DOI: 10.1615/IHMTC-2021.460
Predicting Interfacial Heat Transfer Coefficient in CO2-Mould Sand Casting of Steel Using Machine Learning Algorithms Vishal B. Bhagwat, Dhanapal Kamble, P. R. Chitragar, Akshay Jadhav pages 317-322 DOI: 10.1615/IHMTC-2021.470
CHF studies on the bottom facing heated flat surface, simulating the calandria vessel of Indian PHWR during core meltdown accident P. K. Verma, Arun Kumar Nayak pages 323-328 DOI: 10.1615/IHMTC-2021.480
Parametric Study of Hybrid Vapour Absorption Refrigeration System (VARS) with Humidification-Dehumidification (HDH) Desalination Ravi Beniwal, Kapil Garg, Himanshu Tyagi pages 329-335 DOI: 10.1615/IHMTC-2021.490
Design of Air Flow System for a forced Draught Gasifier Cookstove Vipul Vibhanshu, Sangeeta Kohli, M.R. Ravi pages 337-342 DOI: 10.1615/IHMTC-2021.500
Comparative Assessment of Modelling Parameters for Prediction of Methane from a Downdraft Biomass Gasifier Zeba Naaz, Vipul Vibhanshu, M.R. Ravi , Sangeeta Kohli pages 343-348 DOI: 10.1615/IHMTC-2021.510
HEAT TRANSFER PERFORMANCE OF HYBRID (Fe3O4 + SiC) NANOFLUID − AN EXPERIMENTAL STUDY Tumuluri Kanthimathi, Panitapu Bhramara pages 349-354 DOI: 10.1615/IHMTC-2021.520
Estimation of Higher Heating Value of Biomass from Basic Analysis on Dry Ash-Free Basis Manish Gupta, Sangeeta Kohli, Anjan Ray pages 355-359 DOI: 10.1615/IHMTC-2021.530
Study of a Waste Heat Recovery Cycle Using Super-Critical Carbon Dioxide as Working Fluid Lakshminarayanan Seshadri, Pramod Kumar pages 361-367 DOI: 10.1615/IHMTC-2021.540
Modelling and Parametric analysis of Reduction of Thermal Load inside Vehicle Cabin Sai Sarath Kruthiventi, Lokesh Kalapala, V. Nagaraju pages 369-372 DOI: 10.1615/IHMTC-2021.550
Thermal management of battery module using PCM and nanoparticle composite Shivam Ambekar, Prasenjit Rath, Anirban Bhattacharya pages 373-379 DOI: 10.1615/IHMTC-2021.560
Effect of Natural Convection on Melting Characteristics of Encapsulated PCM Vidula Athawale, Amman Jakhar, Jegatheesan M, Prasenjit Rath, Anirban Bhattacharya pages 381-386 DOI: 10.1615/IHMTC-2021.570
Modelling and Simulation of Human Respiratory Droplet Transport: Cloud Evaporation Effect Neil Ghosh, Anandteerth Muddapur, Srikrishna Sahu pages 387-393 DOI: 10.1615/IHMTC-2021.580
Three-dimensional pore scale modelling of PCM-metal foam composites for energy storage Jibin M Joy, Amman Jakhar, Jegatheesan M, Prasenjit Rath, Anirban Bhattacharya pages 395-400 DOI: 10.1615/IHMTC-2021.590
Development of a numerical model for cell shrinkage during cryopreservation of cells Pavan Sharanappa Kori, Anirban Bhattacharya, Prasenjit Rath pages 401-406 DOI: 10.1615/IHMTC-2021.600
A numerical and experimental based thermo-hydraulic performance analysis of a solar air heater having a forward NACA ribs roughness on the absorber plate Yogesh M. Patel, Anupam Choubey, Anil Kumar Sakhiya pages 407-412 DOI: 10.1615/IHMTC-2021.610
Investigation of Thermal Contact Conductance Across Pressed Bi-Metallic Aerospace Joints at Low Temperature Reji Joseph, Jophy Peter, Asok Kumar N, S Sunil Kumar pages 413-418 DOI: 10.1615/IHMTC-2021.620
Micro-scale solidification and micro-segregation during laser spot melting of binary alloys Aurabinda Swain, Jegatheesan M, Soumen Kole, Prasenjit Rath, Anirban Bhattacharya pages 419-423 DOI: 10.1615/IHMTC-2021.630
Numerical simulation of station blackout transients in spent fuel pool of nuclear power plants Nilesh Agrawal, Seik Mansoor Ali pages 425-431 DOI: 10.1615/IHMTC-2021.640
Thermosyphon based thermal management of high heat flux electronics K. U. Aruli, K. A. Kamurudeen, Kannan Lakshminarayan, Amrit Ambirajan pages 433-438 DOI: 10.1615/IHMTC-2021.650
Computational Fluid Dynamics Analysis of Turbulent Hybrid Nano-Oil Flow through a Long Heated Tube Satish Upadhyay, Laltu Chandra, Jahar Sarkar pages 439-444 DOI: 10.1615/IHMTC-2021.660
Evaluation of thermal performance of passive indirect solar water heating system using thermal oil-based hybrid nanofluids. Mayaram Sahu, Shubham Kashyap, Jahar Sarkar, Laltu Chandra pages 445-451 DOI: 10.1615/IHMTC-2021.670
Four E's (Energetic, Exergetic, Enviro-economic) investigation of air HX assisted with various TTI using THyNF Vikash Kumar, Rashmi Rekha Sahoo pages 453-459 DOI: 10.1615/IHMTC-2021.680
Waste Heat Recovery of A Diesel Engine Exhaust by A Combined Power and Cooling System Comprising of Reheat Organic Rankine Cycle and Absorption Refrigerator Auritro Samanta, Samiran Samanta pages 461-466 DOI: 10.1615/IHMTC-2021.690
Estimation of Interfacial Mass Flux for Convection-induced Evaporation of Water inside a Partly-filled Enclosure Manish Bhendura, Sameer Khandekar, Krishnamurthy Muralidhar pages 467-472 DOI: 10.1615/IHMTC-2021.700
Simulation of spreading of a water droplet on a partially wetted substrate at a low Weber number using an improved contact angle model Raghvendra Kumar Dwivedi, Vandana Jain, Krishnamurthy Muralidhar pages 473-478 DOI: 10.1615/IHMTC-2021.710
CFD Analysis of Air Cooled IC Engine Fins in the Presence of an Obstruction Placed Upstream at Low Ambient Temperatures Ashrit Tayade, Sisir Sanagala, P Srinivasan pages 479-485 DOI: 10.1615/IHMTC-2021.720
Experimental Evaluation of a Pebble-bed Thermal Energy Storage for Solar Convective Furnace Vishwa Deepak Kumar, Laltu Chandra, Sudipto Mukhopadhyay, Rajiv Shekhar pages 487-492 DOI: 10.1615/IHMTC-2021.730
Performance analysis of microchannel heat sink with converging secondary channels Vinayak Gaikwad, Suhas Mohite pages 493-499 DOI: 10.1615/IHMTC-2021.740
Exergy Destruction and Drag Reduction for Opposing Jet Technique in Presence of Real Gas Reactions Ajay Patil, Vinayak Kulkarni pages 501-507 DOI: 10.1615/IHMTC-2021.750
Melting and solidification of metal matrix nanocomposites during laser melting Jegatheesan M, Aurabinda Swain, Soumen Kole, Prasenjit Rath, Anirban Bhattacharya pages 509-514 DOI: 10.1615/IHMTC-2021.760
Thermal and Hydraulic Performance Evaluation of fluid pumped space radiators with series and parallel flow paths Anek Venudas Pillai, Moon Bakaya Hazarika, Rishabh Goel, Harsh Prateek Gupta, Bharat K, Sreenivas N pages 515-521 DOI: 10.1615/IHMTC-2021.770
Heat and Mass Transfer Characteristics of Intermittent Drying Akhilesh Singh, Jahar Sarkar, Rashmi Rekha Sahoo pages 523-529 DOI: 10.1615/IHMTC-2021.780
Energy efficiency of a sensible energy storage system with multi-tubular passages and coil inserts Ravi Kumar, Manoj Kumar, Anil Kumar Patil pages 531-534 DOI: 10.1615/IHMTC-2021.790
Physics-Informed Neural Network: Application to spacecraft thermal modelling Rajat Chourasia, D. Sathyanarayanan, Abhijit Avinash Adoni, Debasis Chakraborty, S V. Bindagi pages 535-538 DOI: 10.1615/IHMTC-2021.800
Numerical study of combustion and emission performance on a multi-holed gasoline direct injection engine with and without flash boiling spray Akhil Ailaboina, Kaushik Saha pages 539-545 DOI: 10.1615/IHMTC-2021.810
Studies on Ambient Temperature Variation in Launch Vehicle Compartments during Depressurization Moon Bakaya Hazarika, Ullekh Pandey, Vanitha K., Ram Prabhu M, Anoop P. pages 547-552 DOI: 10.1615/IHMTC-2021.820
PERFORMANCE IMPROVEMENT OF SOLAR AIR HEATER USING JET IMPINGEMENT COOLING: AN EXPERIMENTAL STUDY Devaprabha, Nevin Abey, Robin Pious, Sebastian Jose, Rajesh Baby, R. Ajith Kumar, Harikrishnan M pages 553-558 DOI: 10.1615/IHMTC-2021.830
Effect of change in orbital parameters on the thermal management scheme of a Nano Satellite R Nikhil , D. R. Veeresha, B S Chaitanya , Debasis Chakraborty, S V Huilgol , S V. Bindagi pages 559-564 DOI: 10.1615/IHMTC-2021.840
Thermal Control System for Magnetometer Boom Instrument (MBI) Akanksha Baggan, D. R. Veeresha, Abhijit Avinash Adoni, Debasis Chakraborty, S V. Bindagi , Alok Kumar Shrivastava pages 565-568 DOI: 10.1615/IHMTC-2021.850
Hybrid Nanofluid Based MHD Thermogravitational Convection in a Porous Cavity Heated Linearly Milan K. Mondal, Nirmalendu Biswas, Aparesh Datta, Dipak Kumar Mandal, Nirmal Kumar Manna pages 569-575 DOI: 10.1615/IHMTC-2021.860
Numerical Investigation of Thermal Energy Storage using Magnesium Nickel Hydride Sumeet Kumar Dubey, K. Ravi Kumar pages 577-583 DOI: 10.1615/IHMTC-2021.870
Thermal Performance Evaluation of Cascade Latent Heat Storage Shubham Jain, K. Ravi Kumar, Dibakar Rakshit pages 585-591 DOI: 10.1615/IHMTC-2021.880
Investigation of Temperature Polarization in Membrane Distillation with Localized Heating in Feed Channel Rajeev Awasthi, K. Ravi Kumar pages 593-599 DOI: 10.1615/IHMTC-2021.890
Effect of Circumferential Grooves on Two-phase Flow in the Parabolic Trough Solar Collector Ram Kumar Pal, K. Ravi Kumar pages 601-607 DOI: 10.1615/IHMTC-2021.900
Experimental investigation of Urea-water solution (UWS) spray impingement on a heated flat surface Anand Kumar, Anandteerth Muddapur, Srikrishna Sahu pages 609-615 DOI: 10.1615/IHMTC-2021.910
Theoretical Investigation of Thermo-hydraulic characteristics of Shell and Tube Heat Exchanger Shreyas Kotian, Nachiket Methekar, Nishant Jain, Pranit Vartak, Pritish Naik, Siddappa S. Bhusnoor pages 617-621 DOI: 10.1615/IHMTC-2021.920
The numerical analysis of spray formation for GDI system using dynamically coupled internal nozzle flow and ELSA spray simulation Arun R S, Kaushik Saha pages 623-629 DOI: 10.1615/IHMTC-2021.930
Numerical Studies of a supersonic Air Ejector using Large Eddy Simulation Pradeep Gupta, Srisha MV Rao, Pramod Kumar pages 631-636 DOI: 10.1615/IHMTC-2021.940
Analysis of Self-Excited Combustion Instability in a Sub-scale Rocket Engine Using Large Eddy Simulation Abhishek Sharma, Ashoke De, S Sunil Kumar pages 637-643 DOI: 10.1615/IHMTC-2021.950
Numerical Analysis of a Flat Plate Solar Collector Integrated with Porous Copper Foam Vismay Kulkarni, Abhishek Singh Kashyap, Mayur Pal, Himanshu Tyagi pages 645-651 DOI: 10.1615/IHMTC-2021.960
Analysis of Compression Ignition Engine Performance and Emission Parameters using Simulink at Different Engine Operating Conditions Sumedh Soman, Siddappa S. Bhusnoor pages 653-658 DOI: 10.1615/IHMTC-2021.970
Thermal Performance Analysis of Wickless Heat Pipe Heat Exchanger using De-Ionized (DI) Water as Working Fluid Yogita Umesh Yerne, Siddappa S. Bhusnoor pages 659-663 DOI: 10.1615/IHMTC-2021.980
Two Phase Modeling of Mixed Convection in Nanofluids inside a Lid-driven Cavity for Various Aspect Ratios Avulam Naveen Kumar, Shantanu Pramanik, Tanmoy Mondal pages 665-670 DOI: 10.1615/IHMTC-2021.990
Effect of surface roughness on water droplet's disintegration mechanism in different heat transfer regimes Rajeev Kumar Singh, Peter D. Hodgson, Niladri Sen, Subrat Das pages 671-677 DOI: 10.1615/IHMTC-2021.1000
Comparative Combustion Performance of Swirl Coaxial Injectors Amit Kumar Yadav, Varghese Mathew Thannickal, Assiz M. P., T. John Tharakan, S Sunil Kumar pages 679-683 DOI: 10.1615/IHMTC-2021.1010
Numerical analyses of re-entry module - Apex cover separation aerodynamics at subsonic Mach number B.Venkat Shivaram Jadav, Amit Kumar Singh, G Vidya, M.M. Patil, V. Ashok pages 685-689 DOI: 10.1615/IHMTC-2021.1020
Effective pressure drop and electroosmotic mixing in micro slits due to slip length variation and micro corrugation A. Haque, Ameeya Kumar Nayak, Bernhard Weigand pages 691-696 DOI: 10.1615/IHMTC-2021.1030
Windward Centreline laminar heating rates of Space Shuttle orbiter configuration at STS-2 flight re-entry condition and its comparison with flight data Amit Kumar Singh, Ankur Nagpal, G Vidya, M.M. Patil, V. Ashok pages 697-701 DOI: 10.1615/IHMTC-2021.1040
Numerical analysis of supercritical CO2 nozzle on the ejector performance Sanjoy Paul, Srisha MV Rao, Pramod Kumar pages 703-708 DOI: 10.1615/IHMTC-2021.1050
Numerical Analysis of Heat Transfer Performance of Double Layer Microchannel Heat Sink with Semi-circular Bumps and Slits Anurag Maheswari, Yogesh Kumar Prajapati pages 709-714 DOI: 10.1615/IHMTC-2021.1060
Estimation of Ground Temperature for Installation of Earth Air Tunnel for Hot and Humid Climatic Conditions Abhishek Kumar Shukla, Roshani Singh, Rahul Dev Misra pages 715-720 DOI: 10.1615/IHMTC-2021.1070
Effective pressure drop and electrokinetic flow influence on blood flow in a rectangular micro slit with sudden expansion Bharat Soni, Ameeya Kumar Nayak pages 721-726 DOI: 10.1615/IHMTC-2021.1080
Multi-Objective Optimization of the Vapour Cycle System of an Aircraft Environmental Control System using Exergy Analysis G BhavaniSankar , Ranganayakulu Chennu pages 727-732 DOI: 10.1615/IHMTC-2021.1090
Drop Impact on inclined superhydrophobic surface Debarshi Debnath, Parmod Kumar pages 733-738 DOI: 10.1615/IHMTC-2021.1100
Flow characteristics and platelet adhesion of blood flow in a corrugated microchannel with the reduction and extension of shear effects. M. Majhi, Ameeya Kumar Nayak, Vanshaj Kerni pages 739-745 DOI: 10.1615/IHMTC-2021.1110
Estimation of hydrodynamic performance of microchannel heat sink with microstructures of various size and shapes − A comprehensive study A Rajalingam , Shubhankar Chakraborty pages 747-753 DOI: 10.1615/IHMTC-2021.1120
Deep Neural Network for solving forward and inverse problems in heat transfer Neeraj Kavan Chakshu, Hamid Reza Tamaddon-Jahromi, Perumal Nithiarasu pages 755-760 DOI: 10.1615/IHMTC-2021.1130
A Numerical Investigation of Charging a High-Temperature Latent Heat Storage Unit : A Variable Domain Methodology Alok Kumar Ray, Dibakar Rakshit, K. Ravi Kumar, Hal Gurgenci pages 761-767 DOI: 10.1615/IHMTC-2021.1140
Electro-osmosis over an arbitrarily-shaped periodic surface Vishal Goyal, Ajay Singh, Subhra Datta pages 769-774 DOI: 10.1615/IHMTC-2021.1150
Oscillating bubbles: Nonlinear corrections to the Minnaert frequency Abhishek Kumar Shukla, Subhra Datta pages 775-779 DOI: 10.1615/IHMTC-2021.1160
Lattice Boltzmann Simulation of Convective Heat Transfer from Embedded Surface Heaters in a Laminar Wall Jet Flow Malyadeep Bhattacharya, Shantanu Pramanik, Tanmoy Mondal pages 781-787 DOI: 10.1615/IHMTC-2021.1170
Design Verification of Modified Outlet of a Cryogenic Oxidiser Tank through CFD Simulations Kodati Srinivas, Suresh Mathew Thomas, Vasudevan R, A. K. Asraff pages 789-794 DOI: 10.1615/IHMTC-2021.1180
Heat transfer enhancement in microchannel with different surface undulations Koustav Bandyopadhyay, Sasmita Bal pages 795-800 DOI: 10.1615/IHMTC-2021.1190
CFD Analysis of High Altitude Test Facility for Off-Design Operation Sharmistha Choubey, Deepak Kumar Agarwal, S Sunil Kumar pages 801-806 DOI: 10.1615/IHMTC-2021.1200
Thermal Performance of a Closed-Loop Flat Plate Pulsating Heat Pipe Filled with Water-based Binary Mixtures Laxman Kumar Malla, Praveen Dhanalakota, Pallab Sinha Mahapatra, Arvind Pattamatta pages 807-813 DOI: 10.1615/IHMTC-2021.1210
Numerical study of supercritical natural circulation loop under condition of different inclination ad diameter Pranab Sutradhar, Tanuj Srivastava, Dipankar Narayan Basu pages 815-819 DOI: 10.1615/IHMTC-2021.1220
Heat Transfer Augmentation of Air-Ferrofluid Taylor Bubble Flow in Presence of a Magnet Madhusree Kole, Ram Krishna Shah, Sameer Khandekar pages 821-825 DOI: 10.1615/IHMTC-2021.1230
Thermal Performance and Flow Characteristics of Elliptical Finned Tube Heat Exchanger with Novel Fin Design Shuvendu Shivam, Sushil Kumar Dhiman pages 827-833 DOI: 10.1615/IHMTC-2021.1240
Numerical Investigation on Heat Transfer Coefficient of Supercritical CO2 in a extended surface Micro Heat-sink Nitesh Kumar, Dipankar Narayan Basu pages 835-840 DOI: 10.1615/IHMTC-2021.1250
Lattice Boltzmann Simulation of Oscillatory behaviour of Horizontal Vents at High Rayleigh number Bhuvaneshwar Gera, Vishnu Verma, Jayanta Chattopadhyay pages 841-846 DOI: 10.1615/IHMTC-2021.1260
Thermal parameter estimation in a two-dimensional irregular heat conducting body using the Bayesian approach Sushrut Ranade, Chakravarthy Balaji pages 847-852 DOI: 10.1615/IHMTC-2021.1270
Numerical estimation of sublimation front position in spin frozen skimmed milk during immersion drying method G Srinivasan, Balakrishnan Raja pages 853-858 DOI: 10.1615/IHMTC-2021.1280
Numerical Investigation of Buoyancy-assisted and -opposed flows in the Laminar Regime of Mixed Convection through a Vertical Channel Somenath Gorai, Devranjan Samanta, Sarit K. Das pages 859-865 DOI: 10.1615/IHMTC-2021.1290
Design Optimization of Ejectors Using ANN and GA Prabhav B. Shukla, Manoj Mydur, Subhash Nayak, V. Krishna pages 867-872 DOI: 10.1615/IHMTC-2021.1300
Estimation of Human Body Core Temperature from Measured Heart Rate using Kalman Filter Models Ikhtedar Husain Rizvi, Udayraj pages 873-878 DOI: 10.1615/IHMTC-2021.1310
Numerical investigation on the flow and thermal behaviour of synthetic jet with different waveforms Pushpanjay K. Singh, Shubhendu N. Tripathi, Ayush K. Shah, Santosh Kumar Sahu, Prabhat K. Upadhyay, Harekrishna Yadav pages 879-884 DOI: 10.1615/IHMTC-2021.1320
Non-Oberbeck-Boussinesq Effects in Natural Convection to Shear-Thinning Power-Law Fluids Subhasisa Rath pages 885-890 DOI: 10.1615/IHMTC-2021.1330
Mathematical Modeling of Dropwise Condensation of Pure Vapor on a Horizontal Tube Waquar Raza, Ramesh Narayanaswamy, Krishnamurthy Muralidhar pages 891-896 DOI: 10.1615/IHMTC-2021.1340
Transient Analysis of a Parallel Channel Single Phase Natural Circulation Loop Varun Hassija, Suneet Singh pages 897-902 DOI: 10.1615/IHMTC-2021.1350
Nanobubble Formation in a Viscous Liquid due to Rotation of a Nanoparticle - a Molecular Dynamics Study Dibyendu Ghosh, Saikat Datta, Prasanta Kumar Das pages 903-908 DOI: 10.1615/IHMTC-2021.1360
Numerical modeling of the thermal performance of a two-phase flat thermosyphon Praveen Dhanalakota, Laxman Kumar Malla, Pallab Sinha Mahapatra, Arvind Pattamatta pages 909-914 DOI: 10.1615/IHMTC-2021.1370
Numerical Investigations on Combined slot and effusion Film cooling of an Annular combustor Liner Buchi Raju Adapa, Ananda Prasanna Revulagadda, Arvind Pattamatta, Chakravarthy Balaji pages 915-921 DOI: 10.1615/IHMTC-2021.1380
Effect of Surface Radiation on Natural Convection Heat transfer from a Helical Coil Gloria Biswal, Subhasisa Rath, Sukanta Kumar Dash pages 923-928 DOI: 10.1615/IHMTC-2021.1390
ESTIMATION OF DRYING KINETICS, PERFORMANCE PARAMETERS AND RESULTS COMPARISON OF NATURAL AND FORCED CONVECTION INDIRECT TYPE SOLAR DRYERS DURING DRYING IVY GOURD Mulatu C. Gilago, Vishnu Vardhan Reddy Mugi, V.P. Chandramohan pages 929-934 DOI: 10.1615/IHMTC-2021.1400
Numerical Study of Falling Film Evaporation on a Horizontal Tube Bundle M.R. Ramesh, Sateesh Gedupudi pages 935-942 DOI: 10.1615/IHMTC-2021.1410
A TWO-PHASE NUMERICAL COMPARISON BETWEEN A SUBMERGED NOZZLE AND AN EXTERNAL NOZZLE FOR A SOLID ROCKET MOTOR Nimisha Srivastava, T. Jayachandran pages 943-948 DOI: 10.1615/IHMTC-2021.1420
Improved cooling system of Li-ion batteries by axial water flow through the core Shawon Bhattacharjee Shanto, Aparesh Datta, Sirshendu Mondal pages 949-955 DOI: 10.1615/IHMTC-2021.1430
Thermal Performance Enhancement in Cross-Flow Helical Tube Heat Exchanger by Modification of Tube Cross-Section Vandana Kumari Jha, Soubhik Kumar Bhaumik pages 957-962 DOI: 10.1615/IHMTC-2021.1440
Effect of Intake Location of Containment Filtered Venting System on Activity Transport in Containment and Source Term I. Thangamani, Vishnu Verma, Jayanta Chattopadhyay pages 963-968 DOI: 10.1615/IHMTC-2021.1450
Cartesian Grid-based DSMC-NS Coupled Simulation Methodology for Continuum-Rarefied Gas Flows Vinay Kumar, Upendra V. Bhandarkar, R.K. Singh, Atul Sharma pages 969-973 DOI: 10.1615/IHMTC-2021.1460
Assessment of BML flamelet and EDM combustion models for turbulent premixed hydrogen combustion using FLUIDYN-MP Shubham Mishra, Vishnu Verma, Jayanta Chattopadhyay pages 975-980 DOI: 10.1615/IHMTC-2021.1470
Characterization of PCM based heat sinks for various power surge durations and intervals: An experimental study Rajesh Akula, Chakravarthy Balaji pages 981-986 DOI: 10.1615/IHMTC-2021.1480
An inverse method to estimate temperature-dependent viscosity of a liquid K. Dinesh Reddy, B. Konda Reddy pages 987-990 DOI: 10.1615/IHMTC-2021.1490
Analytical Modeling of Steam-Air Bubble Dynamics in Sub-Cooled Water Pool I. Thangamani, Anu Dutta, Vishnu Verma, N. K. Maheshwari, Jayanta Chattopadhyay pages 991-996 DOI: 10.1615/IHMTC-2021.1500
Study of interfacial thermal resistance in boron nitride nanotube (BNNT)-water interface Sobin Alosious, Sridhar Kumar Kannam, Billy D Todd, Sarith P. Sathian pages 997-1002 DOI: 10.1615/IHMTC-2021.1510
Parametric Analysis of Pulsating Heat Pipes for Space Applications Alok Kumar, Suneet Singh pages 1003-1007 DOI: 10.1615/IHMTC-2021.1520
Development of Numerical model for Analysing Transients of Two-Phase Natural Circulation Loops (NCLs) K.N.V. Adinarayana, P. Mangarjuna Rao, Seik Mansoor Ali pages 1009-1014 DOI: 10.1615/IHMTC-2021.1530
Flow-induced electrohydrodynamics in a nanochannel with finite temperature gradient Kiran Prakash, K V S Dheeraj , Sridhar Kumar Kannam, Sarith P. Sathian pages 1015-1019 DOI: 10.1615/IHMTC-2021.1540
Computational and Experimental Investigation on the Breast Tumor Depth Characteristics Performed using Infrared Thermography Greeshma Jacob, Iven Jose, Sujatha S pages 1021-1027 DOI: 10.1615/IHMTC-2021.1550
Sizing of Insulation Panels with a Coupled Conduction and Radiation Heat Transfer Model Akshita Arora, Pradeep Kumar P, Amrit Ambirajan pages 1029-1035 DOI: 10.1615/IHMTC-2021.1560
Numerical computation of time lag and decrement factor for different building wall materials Shammy Kumar Sah, Krishnan Murugesan, Elangovan Rajasekar pages 1037-1042 DOI: 10.1615/IHMTC-2021.1570
Liquid structuring of confined organic coolant in nanochannels. A comparative study with water Abhijith Anandakrishnan, Sarith P. Sathian pages 1043-1048 DOI: 10.1615/IHMTC-2021.1580
Numerical Study of Heat Transfer Characteristics in Helical Coils with Sinusoidal Wavy Walls Monica Chauhan, G. P. Aravind , M. Deepu pages 1049-1055 DOI: 10.1615/IHMTC-2021.1590
Thermo-fluid analysis of parabolic trough receiver using different gases Sumeet Anand, Sumit Kumar pages 1057-1063 DOI: 10.1615/IHMTC-2021.1600
Prediction of hydrate growth front using electrical resistance in a cylindrical reactor Randeep Ravesh, Ayaj Ahamad Ansari, P.K. Pangrahi, Malay Kumar Das pages 1065-1067 DOI: 10.1615/IHMTC-2021.1610
Design of Compact Heat Exchanger for Channelising the Low-Temperature Waste Heat from Internal Combustion Engines using Organic Rankine Cycle Inderpal Singh, Atul Dhar, Parmod Kumar pages 1069-1074 DOI: 10.1615/IHMTC-2021.1620
Numerical Investigation of Steam Injection in Subcooled Water Anant Singhal, Deepak Kumar Agarwal, Atul Srivastava, Milind D. Atrey pages 1075-1080 DOI: 10.1615/IHMTC-2021.1630
Design of Parabolic Reflector Heater Module for High Heat Flux Simulation John G Geo, Philip George, Anoop P, Manokaran K pages 1081-1086 DOI: 10.1615/IHMTC-2021.1640
EFFECT OF MOISTURE ON CONVECTION HEAT TRANSFER THROUGH ROOFTOP SOLAR CHIMNEY Himanshu Dahire, Srinivasa Ramanujam Kannan pages 1087-1092 DOI: 10.1615/IHMTC-2021.1650
RADIATIVE TRANSFER ANALYSIS OF ROOFTOP SOLAR CHIMNEY BY TREATING MOIST AIR AS PARTICIPATING MEDIA Himanshu Dahire, Srinivasa Ramanujam Kannan pages 1093-1099 DOI: 10.1615/IHMTC-2021.1660
Influence of Central Angle on Buoyancy Driven Thermal Flow Behaviours inside a Circular Porous Enclosure Heating from below Saddam Hossain Mullick, Debabrata DasGupta, Pranab Kumar Kundu pages 1101-1106 DOI: 10.1615/IHMTC-2021.1670
Guidelines for type and order of quadrature in discrete ordinates method for radiative transfer in plane parallel medium Akhil Sharma, Pradeep Kumar, Amrit Ambirajan pages 1107-1113 DOI: 10.1615/IHMTC-2021.1680
ASSESSMENT OF A HYBRID SOLUTION APPROACH FOR THE SOLUTION OF THE RADIATIVE TRANSFER EQUATION IN COMBUSTION GASES Nehal Jajal, Sandip Mazumder pages 1115-1120 DOI: 10.1615/IHMTC-2021.1690
Thermal effects on flow through micronozzles with various geometries Manu K Sukesan, Mihir, Shine SR pages 1121-1126 DOI: 10.1615/IHMTC-2021.1700
Electro-Magneto-Hydrodynamics of Shear Driven Microscale Flows Dhruvi Patel, Purbarun Dhar pages 1127-1131 DOI: 10.1615/IHMTC-2021.1710
Design and Experimental Investigation on Liquid Nitrogen Cryoprobe for Cryosurgery Niravkumar Parmar, Vishal Singh, Mitesh Shah pages 1133-1138 DOI: 10.1615/IHMTC-2021.1720
A low-cost hybrid solar simulator for longer time scale thermal applications Debartha Chatterjee, Sameer Khandekar pages 1139-1143 DOI: 10.1615/IHMTC-2021.1730
Numerical investigation on heat transfer characteristics during spray evaporation of water Pothi Raj. R, Rajasekar. K, Raja. B pages 1145-1149 DOI: 10.1615/IHMTC-2021.1740
Computational study on jet break-up behavior of a high-density liquid jet entering a quiescent immiscible liquid pool Umesh Madanan, S. Prajapati pages 1151-1157 DOI: 10.1615/IHMTC-2021.1750
Electrical-Thermal design of liquid cooled battery pack for Electric vehicles Vaibhav K Singh, Akshay S N, Supratim Naskar, Satishchandra Wani pages 1159-1165 DOI: 10.1615/IHMTC-2021.1760
CFD analysis of single nozzle air ejector system used in aircraft Compact Heat Exchanger applications GovindhaRasu N, L. Sheik Ismail, Krishna Prasad V pages 1167-1172 DOI: 10.1615/IHMTC-2021.1770
Collision of steam bubbles in a vertical rectangular channel containing subcooled liquid Akshay Thakur, Parmod Kumar pages 1173-1179 DOI: 10.1615/IHMTC-2021.1780
Thermal Performance Studies on a Packed Bed Regenerator Using Wire Screen Matrix Air Heater Arun Uniyal, Yogesh Kumar Prajapati, Lokesh Varshney pages 1181-1187 DOI: 10.1615/IHMTC-2021.1790
Electromigration Dispersion of Power Law Fluid in a microcapillary A. Chatterjee, Ameeya Kumar Nayak, Bernhard Weigand pages 1189-1195 DOI: 10.1615/IHMTC-2021.1800
General pressure equation based algorithm for solving incompressible flow equations on collocated grids R. Dheeraj, Y. Sudhakar pages 1197-1203 DOI: 10.1615/IHMTC-2021.1810
Numerical Study of Sodium Flow Boiling Characteristics in a Narrow Tubular Channel by Developing an Eulerian-Eulerian Model Sachin Tom, P. Mangarjuna Rao, S. Raghupathy pages 1205-1210 DOI: 10.1615/IHMTC-2021.1820
Numerical investigation of heat transfer characteristics of a double-pass solar air heater with an eccentric absorber plate Soumya R. Nayak, Ashok Kumar Barik pages 1211-1215 DOI: 10.1615/IHMTC-2021.1830
Analysis of Heat Transfer and Phase Change Phenomenon between Liquid Sodium and Fuel Vapor under Energetic CDA in SFR B. Thilak, P. Mangarjuna Rao, S. Raghupathy pages 1217-1222 DOI: 10.1615/IHMTC-2021.1840
Numerical Investigation of Wettability and its Effects on Flow through Textured Micro-channels using Lattice Boltzmann Method Ganesh Meshram, Sasidhar Kondaraju pages 1223-1229 DOI: 10.1615/IHMTC-2021.1850
Thermal Performance of Square, Circular and Rectangular Earth-Tube Air Heat Exchanger- A Numerical Study Sudhir Kumar, Narendra Gajbhiye, Harshad Raghuwanshi pages 1231-1237 DOI: 10.1615/IHMTC-2021.1860
Numerical Study on Rayleigh−Benard Convection in a Wavy Enclosure Containing CuO-Water Nanofluid Mulani Feroz Osman, M. Deepu pages 1239-1244 DOI: 10.1615/IHMTC-2021.1870
Design and CFD Analysis of Compact Fuel Jet Pump for a Typical Combat Aircraft Fuel System Applications L. Sheik Ismail, Krishna Prasad V, Muthuraj C, Upendra Kumar S pages 1245-1251 DOI: 10.1615/IHMTC-2021.1880
Fuel Sloshing Studies in an Inverted Flight Compartment of a Typical Combat Aircraft L. Sheik Ismail, Krishna Prasad V, Upendra Kumar S pages 1253-1258 DOI: 10.1615/IHMTC-2021.1890
Heat Transfer Characteristics of electrochemical cell − A numerical study Nagaraju Napa, Manish Agrawal, Bhaskar Tamma, Anirudh Reddy Bendaram pages 1259-1265 DOI: 10.1615/IHMTC-2021.1900
Thermal Modelling of Loop Heat Pipe for Long Duration Space Missions Ullekh Pandey, Meena Balakrishnan, Kota Santosh Lakshmi, Anoop P, Sundar B pages 1267-1272 DOI: 10.1615/IHMTC-2021.1910
CFD Simulation of Lean Hydrogen Deflagration in Large Confined Volume of THAI Facility Nandan Saha, Vishnu Verma, Jayanta Chattopadhyay pages 1273-1279 DOI: 10.1615/IHMTC-2021.1920
Performance Prediction of Combat Aircraft Fuel Jettisoning System Using Modelling and Simulation Approach V. Krishnaprasad, L. Sheik Ismail, Muthuraj C, Vinay H P pages 1281-1287 DOI: 10.1615/IHMTC-2021.1930
Numerical Analysis of Drying Kinetics of Spherical Products in a Solar Dryer Nayanita K, G Srinivasan, G Sureandhar, Palanisamy Muthukumar pages 1289-1294 DOI: 10.1615/IHMTC-2021.1940
Numerical investigation of a multi tube combined latent and sensible heat thermal energy storage system Suraj Arun Tat, Gurpreet Singh Sodhi, Umapathi N, Palanisamy Muthukumar pages 1295-1300 DOI: 10.1615/IHMTC-2021.1950
Performance Investigations of the Energy Discharge Characteristics of High-temperature Phase Change Material Capsules Gurpreet Singh Sodhi, Suraj Arun Tat, Umapathi N, Palanisamy Muthukumar pages 1301-1306 DOI: 10.1615/IHMTC-2021.1960
Numerical Study on Optimisation of the Discharging Characteristics of Three-PCM Cascaded Latent Heat Storage System with Non-uniform Fin Distribution Umapathi N, Gurpreet Singh Sodhi, Suraj Arun Tat, Palanisamy Muthukumar pages 1307-1313 DOI: 10.1615/IHMTC-2021.1970
Effect of Pitch and Tube arrangement on the Thermal Performance of Earth-Air Heat Exchanger − A Numerical Study Sunil Dodkey, Narendra Gajbhiye pages 1315-1320 DOI: 10.1615/IHMTC-2021.1980
3D Computational Fluid Dynamics Analysis to Predict Poison Jet Growth in Moderator inside Calandria during SDS#2 actuation Megha Rajguru, Jaspal Singh, D. Datta, H. P. Rammohan pages 1321-1325 DOI: 10.1615/IHMTC-2021.1990
3D Computational Fluid Dynamics Analysis to Estimate Temperature Distribution of Spent Fuel Bundle during Dry Transfer Operation Megha Rajguru, Prashant Rahatgaonkar, Jaspal Singh, D. Datta, H. P. Rammohan pages 1327-1330 DOI: 10.1615/IHMTC-2021.2000
Experimental Study of Lift-off Dynamic Seal for LOX-Kerosene Engine Fahd Bin Abdul Hasis, Abilash P. M, Paul P. George, Jayan N., Nageswaran G., M. S. Suresh pages 1331-1335 DOI: 10.1615/IHMTC-2021.2010
Thermal transport in MoS2 and 2-D Black Phosphorous K V S Dheeraj , Sarith P. Sathian pages 1337-1341 DOI: 10.1615/IHMTC-2021.2020
Heat transfer enhancement in a PCM-based shell-and-tube-type thermal-energy storage device with nano-particle enhancement, addition of triangular annular fins, fin pitch, and HTF flow reversal A Akarsh, Sumer Dirbude pages 1343-1350 DOI: 10.1615/IHMTC-2021.2030
Experimental Investigation of Variable Tip Clearance in Square Pin Fin Microchannel Heat Sink Prabhakar Bhandari, Yogesh Kumar Prajapati pages 1351-1356 DOI: 10.1615/IHMTC-2021.2040
Investigation of Fluid Flow and Heat transfer Characteristics of Synthetic Jet Impingement at different Strouhal Number Kailash Choudhary, Chinmay Lote, Pawan Sharma, Santosh Kumar Sahu, Harekrishna Yadav pages 1357-1362 DOI: 10.1615/IHMTC-2021.2050
An 800 node thermoregulation model for reference Indian subject Rajdip Podder, Prem Kumar Badal, Gulzar Ahmed, Shine SR pages 1363-1369 DOI: 10.1615/IHMTC-2021.2060
Analysis of Human Thermal Response at Transient Conditions Prem Kumar Badal, Rajdip Podder, Ankith Hunagund, Shine SR pages 1371-1377 DOI: 10.1615/IHMTC-2021.2070
Flight Experiment of PCM coupled heat pipe onboard GSAT-29 spacecraft Akhil Jaiswal, Venkata Raghavendra, Amrit Ambirajan, Alok Kumar Shrivastava, Pramod Kumar, Pradip Dutta pages 1379-1383 DOI: 10.1615/IHMTC-2021.2080
Thermodynamics Analysis of an Atmospheric Water Harvesting System Tanuj Singh, Ravi Beniwal, Kapil Garg, Himanshu Tyagi pages 1385-1390 DOI: 10.1615/IHMTC-2021.2090
Thermo-structural Design of an AA2014 mounting between a Structure and Liquid Oxygen Propellant Tank of a Launch Vehicle Akula Akhil Praveen, Sharmistha Choubey, Reji Joseph, G Vijayakumar pages 1391-1396 DOI: 10.1615/IHMTC-2021.2100
EXPERIMENTAL STUDIES ON THERMAL PERFORMANCE EVALUATION OF HYBRID SOLAR COOKER USING PHASE CHANGE MATERIALS AND PV TECHNOLOGY S. S. Bhandari, Deepak Pal, Govind Verma pages 1397-1402 DOI: 10.1615/IHMTC-2021.2110
Coupled Effect of Variable Wettability and Body Force on Fluid Flow through Nanochannels: A Multiscale Approach Abhirup Chaudhuri, Vinay Arya, Chirodeep Bakli pages 1403-1409 DOI: 10.1615/IHMTC-2021.2120
Thermal performance of PCM based heat sink with solid and hollow fins for thermal management of electronics Anuj Kumar, Akash K Singh, Ameya A Chitre, Rohit Kothari, Vivek Saxena, Santosh Kumar Sahu, Shailesh I. Kundalwal pages 1411-1416 DOI: 10.1615/IHMTC-2021.2130
DECODING THE ALTERATION OF THERMAL CONDUCTIVITY OF NANOFLUIDS FROM MOLECULAR PERSPECTIVE Avinash Kumar, Vinay Arya, Chirodeep Bakli pages 1417-1422 DOI: 10.1615/IHMTC-2021.2140
Two-fluid magnetohydrodynamic channel flows - Induction Approximation A. Rejeesh Ad, S. Unni, Upendra V. Bhandarkar, Shivasubramanian Gopalakrishnan, K Bodi pages 1423-1428 DOI: 10.1615/IHMTC-2021.2150
Swift Optimization of Serial Radiators for Space Applications using an Approximation Technique Chiranjeevi Phanindra B, Ashok V, Srinivasan K, Sundararajan T pages 1429-1435 DOI: 10.1615/IHMTC-2021.2160
Cavitation Performance of a Cryogenic Upper Stage Liquid Rocket Engine Pump Operating in Liquid Hydrogen P. Rijish Kumar, B. Prejil Kumar, K. Harikumar, Sridhar Panigrahi, P. Unnikrishnan Nair, N. Jayan pages 1437-1442 DOI: 10.1615/IHMTC-2021.2170
Enhancement of quenching heat transfer using extended surfaces. Venugopal Venkitesh, Susmita Dash pages 1443-1449 DOI: 10.1615/IHMTC-2021.2180
Analysis of Thermal Response of Commonly used Envelope Designs for Energy Efficient Buildings in Composite Climate of India Dora Nagaraju, Udayraj pages 1451-1457 DOI: 10.1615/IHMTC-2021.2190
Supersonic plume interactions with transonic and hypersonic freestreams, and their impact on convective surface heating Susheel Kumar S., Sharmistha Choubey, Sutheesh P.M., Deepak Kumar Agarwal, T. John Tharakan pages 1459-1463 DOI: 10.1615/IHMTC-2021.2200
Computational Investigation of Nickel and Chromium Based Super Alloys as Gas Turbine Blade Materials Rayapati Subbarao, Hindol Banerjee pages 1465-1470 DOI: 10.1615/IHMTC-2021.2210
Experimental analysis of direct contact condensation during vertical injection of steam on subcooled water pool Sharey Deep Guleria, Parmod Kumar pages 1471-1477 DOI: 10.1615/IHMTC-2021.2220
Film flow and air entrainment around partially submerged rotating roller with a steady flow of air: A numerical approach Santosh Kumar Panda, Basanta Kumar Rana, Parmod Kumar pages 1479-1483 DOI: 10.1615/IHMTC-2021.2230
Parametric Investigation of the Below-cloud Scavenging of Atmospheric Aerosols by Raindrops Utsav Bhardwaj, Vikram Singh, Bahni Ray pages 1485-1491 DOI: 10.1615/IHMTC-2021.2240
Numerical Study of Thermal Characteristics of Micro Heat Pipe: Role of Various Operating Parameters on Maximum Heat Transport Capability Arnab Lahiri, K. Renji, Shankar Narayan Y. S, Shanmuga Sundaram N, Bhanumathy Y. R pages 1493-1499 DOI: 10.1615/IHMTC-2021.2250
Computations of Heat Conduction in Two-Dimensional (2D) Domains Using a High-Accuracy Radial Basis Function Based Meshless Method Naman Bartwal, Shantanu Shahane, Somnath Roy, Surya Pratap Vanka pages 1501-1506 DOI: 10.1615/IHMTC-2021.2260
Numerical studies on the effects of geometrical and operational conditions on the chugging phenomenon Sampath Bharadwaj Kota, Seik Mansoor Ali pages 1507-1512 DOI: 10.1615/IHMTC-2021.2270
Simulation of Sodium Aerosol Behaviour in Cover Gas Space Using Multiphase Model B. Anoop, Mangarjuna Rao P pages 1513-1518 DOI: 10.1615/IHMTC-2021.2280
Numerical Investigation of a Phase Change Material Enhanced Li-ion Battery Pack using the Dual Potential Multi-Scale Multi-Dimensional (MSMD) Approach Vivek Saxena, Hrishav Dey, Anuj Kumar, Akhalesh Sharma, Santosh Kumar Sahu, Shailesh I. Kundalwal pages 1519-1525 DOI: 10.1615/IHMTC-2021.2290
A NUMERICAL ANALYSIS on the INFLUENCE of VARIOUS WORKING FLUIDS over the THERMAL PERFORMANCE of the VORTEX TUBE Nitin Bagre, A D Parekh, Vimal K. Patel pages 1527-1533 DOI: 10.1615/IHMTC-2021.2300
Effect of ignition temperature at air-inlet and radiation on temporal soot growth of turbulent diffusion flame Prakash Ghose, Tarak Kumar Sahoo, Rishitosh Ranjan, Kunja Bihari Sahu pages 1535-1541 DOI: 10.1615/IHMTC-2021.2310
Optimization of Hydrodynamic Performance of a Venturi Scrubber through Numerical Analysis Satwik Modi, Shubhankar Chakraborty pages 1543-1549 DOI: 10.1615/IHMTC-2021.2320
Electrical Power output enhancement of Photovoltaic cells using ferrofluid based cooling Danvendra Singh, Mohammed Asfer, Obaied Mussad, Turkey Al otaibi, Mohammad T Haweel, Om Prakash, Balkrishna Mehta pages 1551-1556 DOI: 10.1615/IHMTC-2021.2330
Effect of Oblique Porous Plugs on the Pressure Drop and Heat Transfer in the Partially Porous Channel Surendra Singh Rathore, Balkrishna Mehta, Pradeep Kumar, Mohammed Asfer pages 1557-1563 DOI: 10.1615/IHMTC-2021.2340
CFD Investigation of Wall Failure Mechanism in EAGLE ID1 Test for Reactor Safety Evaluation Prasant Kumar Panigrahi, K. Velusamy, K Natesan, K. Devan pages 1565-1569 DOI: 10.1615/IHMTC-2021.2350
Numerical Analysis of Nano-Fluid Based Wavy Wall Microchannel Heat Sink for Electronic Cooling Applications D. Sathish Kumar, S. Jayavel pages 1571-1576 DOI: 10.1615/IHMTC-2021.2360
Numerical Studies of Shock-Wave/Boundary-Layer Interaction over Blunted Cone/Flare at Hypervelocity Speed Ribhu Pal, Prince Raj Lawrence Raj pages 1577-1582 DOI: 10.1615/IHMTC-2021.2370
Observation of Pressure Oscillations During Performance Testing of a Rocket Engine Fuel Pump Sanand T V, Harikumar K, Deepak Kumar Agarwal, Unnikrishnan Nair P, N. Jayan, Nageswaran G. pages 1583-1588 DOI: 10.1615/IHMTC-2021.2380
Bubble flow characteristics in subcooled flow boiling in microchannel heat sinks Simhachala Rao Chikkala, A. R. Anand, Alok Kumar Shrivastava, P. K. Das pages 1589-1594 DOI: 10.1615/IHMTC-2021.2390
Heat Transfer Augmentation in Micro Pin Fin Heat Sink Using Out of Plane Fluid Mixing Prabhakar Bhandari, Yogesh Kumar Prajapati, Vijay Singh Bisht pages 1595-1600 DOI: 10.1615/IHMTC-2021.2400
Assessment of Shutdown Systems' performance during postulated Large Break LOCA for 700MWe Pressurized Heavy Water Reactors Ritwik Mandal, Nrependra Kumar, Ashutosh Dixit, S.K. Yadav, T.A. Khan, Manoj Kansal, S. Hajela, H. P. Rammohan pages 1601-1606 DOI: 10.1615/IHMTC-2021.2410
MyCoil − A program for the rating and optimisation of flow paths of air-cooled heat exchangers G. Venkatarathnam pages 1607-1611 DOI: 10.1615/IHMTC-2021.2420
Numerical Studies on Hydrogen Distribution Patterns in Nuclear Reactor Containment Aditya Karanam, Bhuvaneshwar Gera, Vishnu Verma, Jayanta Chattopadhyay pages 1613-1617 DOI: 10.1615/IHMTC-2021.2430
Effects of Thermal boundary conditions in a Porous enclosure with Gambrel roofing-A numerical study Shantanu Dutta, Sukumar Pati, Koushik Ghosh pages 1619-1624 DOI: 10.1615/IHMTC-2021.2440
Heat Source Conditions and PCM Chamber Orientation Effect on the Performance of a Latent Heat Thermal Energy Storage System Chandrapal Singh Rajpoot, Bhaskar Ranjan Tamuli, Sujit Nath, Dipankar Bhanja pages 1625-1630 DOI: 10.1615/IHMTC-2021.2450
Effect of Electromagnetic Stirring on Solidification of A356 Alloy Jyothsna K Moorthy, Pramod Kumar pages 1631-1636 DOI: 10.1615/IHMTC-2021.2460
Variation in CFD Parameters for Afterburners with Standard V-Gutter and Modified V-Gutter Srinivasa Rao Gurrala pages 1637-1642 DOI: 10.1615/IHMTC-2021.2470
Numerical study of Heat Transfer Characteristics of an Impinging Synthetic Jet Vijaykumar Suryawanshi, Siddhant Sinhasane, Anuja Sonawane, Prajakta Sonawane, Prashant W. Deshmukh pages 1643-1649 DOI: 10.1615/IHMTC-2021.2480
Geyser Boiling in a Pulsating Heat Pipe Unit Cell Utsav Bhardwaj, Rabindra Kumar, Shyama Prasad Das pages 1651-1657 DOI: 10.1615/IHMTC-2021.2490
Simultaneous Mapping of Temperature and Velocity Fields Using Thermographic PIV Vimal Kishor, Atul Belekar, Suneet Singh, Atul Srivastava pages 1659-1664 DOI: 10.1615/IHMTC-2021.2500
NUMERICAL STUDY OF HYDRODYNAMICS AND HEAT TRANSFER CHARACTERISTICS DURING COOLING OF CURVE SURFACE WITH WATER JET IMPINGEMENT Himanshu Dwivedi, Ajoy Debbarma pages 1665-1670 DOI: 10.1615/IHMTC-2021.2510
Heat transfer analysis of air-cooled nuclear fuel storage vault Vivek K. Mishra, Saroj K. Panda, Biswanath Sen, M. Prakash Maiya, B.P.C. Rao pages 1671-1676 DOI: 10.1615/IHMTC-2021.2520
Investigation of the flow field at the exit of an annular unconfined swirl burner at cold flow conditions using particle image velocimetry Ankit Gupta, Vishnu Raj, Yash Asati, Chockalingam Prathap pages 1677-1682 DOI: 10.1615/IHMTC-2021.2530
Effect of inclination on the stability map of Coupled Natural Circulation Loop Systems Akhil Dass , Sateesh Gedupudi pages 1683-1689 DOI: 10.1615/IHMTC-2021.2540
Recent Advancements in A Film-Wise Condensation Over Outside of Single Horizontal Tubes Ibrahim Mustefa, Ravi Kumar pages 1691-1698 DOI: 10.1615/IHMTC-2021.2550
An Efficient Computational Model for Solidification of Water in Large Tanks Shashank Terala, Sandip Mazumder, Gurpreet Matharu, Dhaval Vaishnav, Mohsen Ehteshami, Syed Ali pages 1699-1704 DOI: 10.1615/IHMTC-2021.2560
Experimental and Numerical investigation of direct contact condensation of steam jet in stagnant subcooled water Mohd Abdullah Khan, Pratap C., Manu K.V., V. Ratna Kishore, Vishnu Viswanath, Deepak Kumar Agarwal pages 1705-1711 DOI: 10.1615/IHMTC-2021.2570
Numerical Investigation on the Lewis Number Effects on the Turbulent Premixed Swirl Stabilized Propane-Air Flames Yash Asati, Akram Mohammad, Ratna Kishore Velamati, Chockalingam Prathap pages 1713-1719 DOI: 10.1615/IHMTC-2021.2580
INVESTIGATIONS ON THE INFLUENCE OF CHANNEL'S SPAN WISE ASPECT RATIO OVER THE HEAT TRANSFER CHARACTERISTICS OF AN UPWARD SOLAR AIR HEATER Harikrishnan M, Rajesh Baby, Ajith Kumar. S pages 1721-1726 DOI: 10.1615/IHMTC-2021.2590
Numerical Study On Catalyst Assisted Combustion Of Premixed Oxy-Methane Mixtures in Platinum reactor Kriti Raj, Chockalingam Prathap pages 1727-1732 DOI: 10.1615/IHMTC-2021.2600
Comparative Analysis of Different Active and Passive Cooling Methodologies for High-Power LEDs Gopinath Sahu, Prem Kumar, Sameer Khandekar, Krishnamurthy Muralidhar pages 1733-1738 DOI: 10.1615/IHMTC-2021.2610
Prediction of thermal contact conductance in conforming rough metal contacts through regeneration of surface profile E Ajul, E Kishor, Samarjeet Chanda pages 1739-1744 DOI: 10.1615/IHMTC-2021.2620
Heat and Mass Transport in a Metal Hydride based Hydrogen Storage Reactor with Hexagonal Heat Transfer Enhancements Mahvash Afzal, Nandlal Gupta, Pratibha Sharma pages 1745-1750 DOI: 10.1615/IHMTC-2021.2630
Heat transfer enhancement using jet impingement with attachments on the target surface Madri Venus, J Ramarajan, S. Jayavel pages 1751-1757 DOI: 10.1615/IHMTC-2021.2640
Computational study on the effect of gas nozzle expansion configurations on the gas flow field for supersonic gas-atomization process Abhay Mane, Niraj Kumar, Supriya Sarkar, T. N. C. Anand, Shamit Bakshi pages 1759-1765 DOI: 10.1615/IHMTC-2021.2650
Sloshing induced heat and mass transfer in LN2 tank Nikhil Papetla, Shyama Prasad Das, Shaligram Tiwari, Deepak Kumar Agarwal pages 1767-1772 DOI: 10.1615/IHMTC-2021.2660
Droplet impact and spreading around the thin solid vertical cylinder: A numerical approach Prakasha Chandra Sahoo, Jnana Ranjan Senapati, Basanta Kumar Rana pages 1773-1778 DOI: 10.1615/IHMTC-2021.2670
Experimental Analysis of Subcooled Flow Boiling at Subatmospheric Pressure Arvind Kumar, B. Kothadia Hardik pages 1779-1784 DOI: 10.1615/IHMTC-2021.2680
Assessment of parallelization techniques for an Eulerian-Lagrangian multiphase flow algorithm Harshal P. Mahamure, Vagesh D. Narasimhamurthy, Lihao Zhao pages 1785-1790 DOI: 10.1615/IHMTC-2021.2690
NUMERICAL INVESTIGATION ON THERMAL BEHAVIOUR OF LITHIUM-ION CELL IN DIFFERENT FLUID MATERIALS Shankar Durgam, Pranav Ingale, Shashank Gupta pages 1791-1796 DOI: 10.1615/IHMTC-2021.2700
Numerical analysis of Gyroid structure based cross-flow heat exchanger Vipul Choudhari, G. Saravana Kumar, Arul Prakash K pages 1797-1802 DOI: 10.1615/IHMTC-2021.2710
Numerical Investigation of Conjugate Heat Transfer and Thermal Stresses of Additively Manufactured Tubes in Turbulent Flow regime Akshay A. More, Sreenivas Jayanti, Arul Prakash K pages 1803-1808 DOI: 10.1615/IHMTC-2021.2720
Numerical Investigation on Hydrodynamics of Non-parallel Hydrophobic Microchannel Aswin R, Ranjith S Kumar pages 1809-1813 DOI: 10.1615/IHMTC-2021.2730
Numerical analysis of photovoltaic panel integrated with PCM and water container Someshwar S. Bhakre, Pravin D. Sawarkar, Vilas R. Kalamkar, Tushar B. Umate pages 1815-1821 DOI: 10.1615/IHMTC-2021.2740
Single phase CFD Modelling to Numerically Evaluate Performance of Compact Plate Heat Exchanger using Al2O3-distilled water Nanofluid for Cooling Applications. Shiva Singh, Subrata Kumar Ghosh pages 1823-1828 DOI: 10.1615/IHMTC-2021.2750
Effect of fin location on constrained melting heat transfer of phase change material in a spherical capsule: A numerical study Akhalesh Sharma, Rohit Kothari, Jaykumar Joshi, Vivek Saxena, Santosh Kumar Sahu pages 1829-1834 DOI: 10.1615/IHMTC-2021.2760
HEAT TRANSFER ENHANCEMENT OF AN IMPINGING SYNTHETIC AIR JET USING SHARP-EDGED ORIFICE Pawan Sharma, Jaykumar Joshi, Pushpanjay K. Singh, Santosh Kumar Sahu, Harekrishna Yadav pages 1835-1840 DOI: 10.1615/IHMTC-2021.2770
Measurement of laminar burning velocity of premixed mixtures of ethane/propane reacting in air and oxygen enriched air using freely expanding spherical flames Krishnadath T, Rajesh N, Muniraja T, Senthilmurugan S, Chockalingam Prathap pages 1841-1846 DOI: 10.1615/IHMTC-2021.2780
Experimental setup to measure thermal diffusivity of solid rod sample using Ångström method at different temperatures Arpana Prasad, Jasvanth V. S. pages 1847-1751 DOI: 10.1615/IHMTC-2021.2790
THERMAL DESIGN AND ANALYSIS OF CONICAL SCANNING EARTH SENSOR FOR POLAR SUN SYNCHRONOUS SATELLITE Tina Thomas, Naga Satya Padmaja, Chaitanya Murthy pages 1853-1857 DOI: 10.1615/IHMTC-2021.2800
Machine Learning Technique to assist Computational Fluid Dynamics S Narasimhan, J Ramarajan, S. Jayavel pages 1859-1865 DOI: 10.1615/IHMTC-2021.2810
Experimental and Numerical Investigation of a Piezoelectric Air-Mover System for Electronics Cooling Rutuja Bilaskar, Sripriya Ramamoorthy, Shankar Krishnan pages 1867-1873 DOI: 10.1615/IHMTC-2021.2820
Investigating Pin Fin Configurations on Automotive Exhaust Heat Exchanger Surface for Thermoelectric Generation Keyur Kansara, Chander Veer, Shobhana Singh pages 1875-1880 DOI: 10.1615/IHMTC-2021.2830
Understanding of gas-liquid interfacial dynamics caused by horizontal rotary roller: A numerical approach Santosh Kumar Panda, Basanta Kumar Rana, Parmod Kumar pages 1881-1886 DOI: 10.1615/IHMTC-2021.2840
Comparative Study on the Suitability of Liquid Rocket Propellants for use in Electric Pump Fed Rocket Upper Stages Kiran Mohan, Vishak Sasidharan, Nandakumar V., Suresh Kumar C. pages 1887-1892 DOI: 10.1615/IHMTC-2021.2850
Development of Two-phase Electrohydrodynamic Flow Solver on Unstructured Grid Somasekhar Reddy Dantla, Amaresh Dalal pages 1893-1897 DOI: 10.1615/IHMTC-2021.2860
Experimental analysis on performance of solar air heater combined with staggered element in inclined rib using liquid crystal thermography technique Yogendra Rathor, K R Aharwal pages 1899-1906 DOI: 10.1615/IHMTC-2021.2870
Thermal Performance of Different Types of CuO hybrid nanofluids for a plate type heat exchanger Anil Kumar, Amman Jakhar, Rajesh Nandal, Rajkumar Duhan pages 1907-1912 DOI: 10.1615/IHMTC-2021.2880
Reduction of Thermal Loading on Inner Vessel of a Future FBR Design Ram Kumar Maity, M. Rajendrakumar, K Natesan pages 1913-1918 DOI: 10.1615/IHMTC-2021.2890
A fractional time stepping template for geometric fluid advection in Volume of Fluid method Ram Kumar Maity, Thirumalachari Sundararajan, K. Velusamy pages 1919-1924 DOI: 10.1615/IHMTC-2021.2900
The competing effects of high zeta potential and finite ionic size on the thermal behaviour of pseudoplastic flows through confined spaces with hydrophobic surfaces Amit Sanjay Hegde, A R Harikrishnan pages 1925-1930 DOI: 10.1615/IHMTC-2021.2910
OPTIMIZATION OF THERMOELECTRIC MODULE ASSISTED SELF-HEAT RECUPERATORS Parth Solanki, Shankar Krishnan pages 1931-1937 DOI: 10.1615/IHMTC-2021.2920
Heat Transfer Analysis of Finned Tube Heat Exchanger with Non-Newtonian fluid and Longitudinal Vortex Generator Dheeraj Kumar, Amaresh Dalal pages 1939-1944 DOI: 10.1615/IHMTC-2021.2930
NUMERICAL INVESTIGATION OF FREE CONVECTION HEAT TRANSFER IN POROUS MEDIA Ankit Tiwari, Chockalingam Prathap, S. Rambabu, Dr P. Parthasarathy pages 1945-1950 DOI: 10.1615/IHMTC-2021.2940
Experimental Analysis of Local Nusselt Number Distribution over a Flat Plate Impinged by Jet of Air through a Circular Nozzle over a Larger Radial Distance Laxmikant Dhruw, B. Kothadia Hardik pages 1951-1956 DOI: 10.1615/IHMTC-2021.2950
Experimental Heat Transfer and Friction factor study with Correlation development for a Rectangular duct having Staggered Racetrack-shaped perforated V-up baffle blocks Rajeev Pandey, Manoj Kumar, J. S. Saini pages 1957-1964 DOI: 10.1615/IHMTC-2021.2960
Characterization of Sintered Porous Wick for use in Loop Heat Pipe Chintala Anvesh, Srikanth T, Jasvanth V. S. pages 1965-1969 DOI: 10.1615/IHMTC-2021.2970
Effect of sidewall on heat transfer characteristics of a three-dimensional wall jet Sarvesh Kumar, Amitesh Kumar pages 1971-1975 DOI: 10.1615/IHMTC-2021.2980
Comparative analysis of cryoablation in nano-phantom and normal-phantom with multihole nozzle Prashant Srivastava, Amitesh Kumar pages 1977-1981 DOI: 10.1615/IHMTC-2021.2990
Heat transfer enhancement by using turbulent wall jet with a partial wavy wall Archana Kumari, Amitesh Kumar pages 1983-1987 DOI: 10.1615/IHMTC-2021.3000
Three-dimensional heat transfer and fluid flow analysis of Double forward-facing stepped channel with obstacles Vishnu M, Arul Prakash K pages 1989-1994 DOI: 10.1615/IHMTC-2021.3010
On the accuracy of RANS turbulence models to predict the influence of free-stream hot gas turbulent Intensity on flat plate film cooling Rahul Radhakrishnan, Sekarapandian Natarajan, Ashok Kannaiyan, Mehmet Karaca, Jayaraman Kandasamy pages 1995-2001 DOI: 10.1615/IHMTC-2021.3020
Numerical Study on the Effect of Multiple Injectors on Thrust Vectoring Performance of Convergent-Divergent Nozzle A J Sharjad, B S Bijo, S Kumar Ranjith pages 2003-2009 DOI: 10.1615/IHMTC-2021.3030
Influence of magnetic field on THF hydrate formation in the presence of Fe3O4 nanoparticles Ayaj Ahamad Ansari, Ganpat Ram, Randeep Ravesh, Malay Kumar Das, Pradipta Kumar Panigrahi pages 2011-2015 DOI: 10.1615/IHMTC-2021.3040
Methodology for Estimation of Source Term Release from Fuel during Severe Accidents in Pressurised Heavy Water Reactors Vageesh Shukla, Nrependra Kumar, Manoj Kansal pages 2017-2021 DOI: 10.1615/IHMTC-2021.3050
Effect of different non-uniform heat flux profiles on thermo-hydraulic characteristics of thermosyphon Md Naim Hossain, Koushik Ghosh pages 2023-2029 DOI: 10.1615/IHMTC-2021.3060
Influence of transient heat input on pool boiling behaviour Md Naim Hossain, Aranyak Chakravarty, Koushik Ghosh pages 2031-2037 DOI: 10.1615/IHMTC-2021.3070
An analytical approach for predicting the effective thermal conductivity of coated metal foams infiltrated with phase change materials Vivek Saxena, Rohit Kothari, Santosh Kumar Sahu, Shailesh I. Kundalwal pages 2039-2044 DOI: 10.1615/IHMTC-2021.3080
Estimation of flux in a disc brake system using accelerated Bayesian inference Sufia Khatoon, Jyoti Phirani, Supreet Singh Bahga pages 2045-2051 DOI: 10.1615/IHMTC-2021.3090
Thermodynamic response of a larger, multi-species ullage of a cryogenic propellant tank during pressurization and slosh excitations Vishnu Viswanath, Deepak K Agrawal, T. John Tharakan, S Sunil Kumar pages 2053-2059 DOI: 10.1615/IHMTC-2021.3100
Computational prediction of pressure drop during incompressible flow across porous screens Aranyak Chakravarty, Swarnendu Sen, Achintya Mukhopadhyay pages 2061-2066 DOI: 10.1615/IHMTC-2021.3110
Performance analysis of a compact liquid desiccant cooling system Kalpana, G. Fekadu, M. Sajesh, Sudhakar Subudhi pages 2067-2072 DOI: 10.1615/IHMTC-2021.3120
Characteristics of laminar-turbulent bands in plane Couette flow S. Gokul, Vagesh D. Narasimhamurthy pages 2073-2077 DOI: 10.1615/IHMTC-2021.3130
Effect of fillet on fluid flow and heat transfer characteristics in a grooved channel: A Numerical study Auronil Mukherjee, Supratim Saha pages 2079-2084 DOI: 10.1615/IHMTC-2021.3140
Accelerating a Hypersonic CO2 Reaction Solver G Vinay Ram, D Dinesh Sai, Satya P Jammy pages 2085-2090 DOI: 10.1615/IHMTC-2021.3150
Effective Thermal Conductivity of Hollow Strut-based Periodic Cellular Solids Akshay Wagh, Sripriya Ramamoorthy, Shankar Krishnan pages 2091-2096 DOI: 10.1615/IHMTC-2021.3160
Impact of pulsating heating on the system dynamics of a Natural Circulation System Sudipta Saha, Aranyak Chakravarty, Ritabrata Saha, Achintya Mukhopadhyay, Swarnendu Sen pages 2097-2103 DOI: 10.1615/IHMTC-2021.3170
Numerical study of molten metal flow through the melt delivery tube during gas-atomization Niraj Kumar, Abhay Mane, Supriya Sarkar, T. N. C. Anand, Shamit Bakshi pages 2105-2110 DOI: 10.1615/IHMTC-2021.3180
Experimental study of gasification of wet biomass in a packed bed downdraft configuration Ravi Kumar, S. Varunkumar pages 2111-2116 DOI: 10.1615/IHMTC-2021.3190
A study on data processing techniques of expanding spherical flames at constant pressure conditions. G Yaswanthram, Muniraja Tippa, Senthilmurugan Subbiah, Chockalingam Prathap pages 2117-2123 DOI: 10.1615/IHMTC-2021.3200
On the Critical Heat Flow Features of Submerged, Low Reynolds Number Jets Impinging on a Protruded Heat Source Abhisek Ganguly, Shantanu Pramanik, Orkodip Mookherjee, Sayantan Sengupta pages 2125-2130 DOI: 10.1615/IHMTC-2021.3210
Conjugate Natural Convection with Surface Radiation from a Vertical Hollow Cylinder with a Finite Wall Thickness Vikrant Chandrakar, Jnana Ranjan Senapati pages 2131-2136 DOI: 10.1615/IHMTC-2021.3220
The Effects of Snowflake-Shaped Fin Configurations on PCM Solidification Amrita Sharma, Shobhana Singh, Bobin Mondal, B. Kothadia Hardik pages 2137-2143 DOI: 10.1615/IHMTC-2021.3230
A comparative experimental study of thermo-hydraulic performance with vortex flow generator and twisted tape insert Smita Sontakke, Parth Patel, B. Kothadia Hardik pages 2145-2150 DOI: 10.1615/IHMTC-2021.3240
Effect of suction/blowing on the heat transfer and fluid flow characteristics past rectangular cylinder with fillet at low Reynolds number Jishnu M, Arul Prakash K pages 2151-2156 DOI: 10.1615/IHMTC-2021.3250
Thermal Performance Comparisons of ECT and Helical-Coiled based Metal-Hydride Reactor Abhishek Parida, Palanisamy Muthukumar pages 2157-2162 DOI: 10.1615/IHMTC-2021.3260
Effect of Cross Flow on the Heat Transfer Characteristics of Steady Jets Vivek Mathew Jose, Shijo Thomas, Biju T. Kuzhiveli pages 2163-2168 DOI: 10.1615/IHMTC-2021.3270
Energy and Exergy Analysis of Natural Refrigerant Pair in a Cascade System for Combined Cooling and Heating Application B. Karthikeyan, Rajagopal Saravanan, G. Praveen Kumar pages 2169-2175 DOI: 10.1615/IHMTC-2021.3280
Thermal Study on Trimethyl Aluminium Canister Payload in Sounding Rocket Rony C. Varghese, Anoop P, Sundar B pages 2177-2181 DOI: 10.1615/IHMTC-2021.3290
Pore scale Simulation of Hydrogen Absorption of Metal Hydride Storage Bed V.K. Aravind , K. Vishnu , R.B. Akshay, K.K. Ali Shabeeb , G. Mohan pages 2183-2189 DOI: 10.1615/IHMTC-2021.3300
Sonic Jet Injection into a Supersonic Turbulent Crossflow Satya P Jammy, Kalyan Deepak G, Sujan B Thapa, Suchet B Thapa pages 2191-2196 DOI: 10.1615/IHMTC-2021.3310
A STUDY ON TWO-PHASE PRESSURE DROP IN ONCE THROUGH STEAM GENERATOR USED IN SFR S.P. Pathak, K. Velusamy pages 2197-2202 DOI: 10.1615/IHMTC-2021.3320
Thermalhydraulic Assessment of Supercritical CO2 filled Double-cooled Annular Channel Ashok kumar Gond, Dipankar Narayan Basu, Amaresh Dalal pages 2203-2208 DOI: 10.1615/IHMTC-2021.3330
Effect of variable set point temperature of the cabin on thermal performance of ground heat exchanger in winter season Satish Kumar, Krishnan Murugesan pages 2209-2215 DOI: 10.1615/IHMTC-2021.3340
Analysis of Hypersonic Rarefied Reactive Flow Over RAM-C II Forebody Using hy2Foam Solver Gaurav Sharma, Aneesh A. M. pages 2217-2223 DOI: 10.1615/IHMTC-2021.3350
Computational analysis of thermal comfort, CO2 and particle trajectory in an office room model with two different air-conditioning system Ramesh Krishnan L, Gangadhara Kiran Kumar Lachireddi pages 2225-2230 DOI: 10.1615/IHMTC-2021.3360
HEAT FLUX OPTIMIZATION FOR HEAT SOURCES ON CONDUCTIVE SUBSTRATE FOR HEAT TRANSFER ENHANCEMENT Shankar Durgam, Ajinkya Bhosale, Vivek Bhosale pages 2231-2235 DOI: 10.1615/IHMTC-2021.3370
An Analytical and Experimental Investigation on Natural Convection in a Mini-channel Cylindrical Heat Sink for COB LED Application Bakhirathan Asokan, Gangadhara Kiran Kumar Lachireddi pages 2237-2242 DOI: 10.1615/IHMTC-2021.3380
Heat and Mass Transfer in a Localized Heated Porous Cavity to Casson Fluid Madhu Aneja, Sapna Sharma pages 2243-2249 DOI: 10.1615/IHMTC-2021.3390
An Inverse Estimation of Thermal Contact Conductance of Aero-Space Structural Adhesive Interface Between Diffuser Plate and Honeycomb Sandwich Panel Govinda Rao Yenni, Saleem M. Basha, Hari Krishna Thota, Jasvanth V S pages 2251-2256 DOI: 10.1615/IHMTC-2021.3400
Parametric study of natural convection flow under the non-Boussinesq condition in a vertical channel with conducting side-walls Deboprasad Talukdar, Suchismita Chatterjee pages 2257-2264 DOI: 10.1615/IHMTC-2021.3410
THERMAL ANALYSIS PACKAGE FOR LAUNCH VEHICLE AVIONICS Rishi Padmanabhan, Philip George, H Ankita Mahantesh, Anoop P, Sundar B pages 2265-2269 DOI: 10.1615/IHMTC-2021.3420
Flame Acceleration Simulations in Gas Explosions based on Porosity/Distributed Resistance Modelling V Meysiva, Manish Dhiman, P Sathiah, Vagesh D. Narasimhamurthy pages 2271-2276 DOI: 10.1615/IHMTC-2021.3430
Generation of Design Data for Offset Fins in Compact Heat Exchangers for Aerospace Applications Akshobhya, Prerak P Bharadwaj, S Suhas, Varun N Rao, Babu Rao Ponangi pages 2277-2283 DOI: 10.1615/IHMTC-2021.3440
Numerical Investigation on the Structural Behaviour of Reinforced Concrete Beam exposed to Elevated Temperatures Naveen A P, Ranjith S Kumar, Priyadarsini R S pages 2285-2291 DOI: 10.1615/IHMTC-2021.3450
NUMERICAL INVESTIGATIONS OF MODIFIED TESLA STRUCTURES WITH APPLICATION TO MIXING Somarya Bhattacharyya, Amaresh Dalal, Ganesh Natarajan pages 2293-2298 DOI: 10.1615/IHMTC-2021.3460
Magnetohydrodynamic Convection in a Grooved Channel Embedded with a Conducting Cylinder Anwesha Das, Shirsa Nandy, Shinjini Das, Nirmalendu Biswas, Nirmal Kumar Manna pages 2299-2305 DOI: 10.1615/IHMTC-2021.3470
Effect of temperature on bubbling fluidized bed hydrodynamics with swirling air distributor Krishna Kant Dwivedi, Alagani Harish, Vasudevan R. Raghavan, S. Varunkumar pages 2307-2312 DOI: 10.1615/IHMTC-2021.3480
Effect of internal rib geometry on film cooling performance G. Babji, Arun Kumar Pujari pages 2313-2318 DOI: 10.1615/IHMTC-2021.3490
INVESTIGATIONS ON TOTAL INSTANTANEOUS BLOCKAGE IN A FUEL SUBASSEMBLY OF FAST REACTOR USING COUPLED THERMAL HYDRAULIC REACTOR PHYSICS MODEL Yadu Narendran, K Natesan, K. Devan, A. John Arul pages 2319-2324 DOI: 10.1615/IHMTC-2021.3500
Performance Analysis of 3D Printed Stack for Standing Wave Thermoacoustic Refrigerator Ronakkumar Patel, Vishal Singh, Mitesh Shah pages 2325-2330 DOI: 10.1615/IHMTC-2021.3510
Investigation on the effects of pressure and Hydrogen addition on laminar burning velocity and flame stability of n-Dodecane-Hydrogen-air mixtures Rajesh N, Chockalingam Prathap pages 2331-2336 DOI: 10.1615/IHMTC-2021.3520
Wake dynamics of turbulent flow over a normal flat plate: a DNS study Pradeep Jadhav, Vagesh D. Narasimhamurthy pages 2337-2342 DOI: 10.1615/IHMTC-2021.3530
Modelling Fast Hydrogen Deflagration in Partially Obstructed Acceleration Tube of ENACCEF and the Model Constant of Eddy Dissipation Model Nandan Saha, Shubham Mishra, Vishnu Verma, Jayanta Chattopadhyay pages 2343-2348 DOI: 10.1615/IHMTC-2021.3540
Generation of design data for wavy fins used in compact heat exchangers for aerospace applications Sukruth Rajesh, Mridu Sai Charan A S, Prashanth Murali, Jyothiprakash K H pages 2349-2355 DOI: 10.1615/IHMTC-2021.3550
Integrated steady and transient pool thermal hydraulic analysis of primary sodium circuit Ram Kumar Maity, M. Rajendrakumar, K Natesan pages 2357-2362 DOI: 10.1615/IHMTC-2021.3560
Modelling and Numerical Simulation of Nano-enhanced Finned PV-PCM System Unnikrishnan K S, B Charles Divyateja, Rohinikumar B pages 2363-2370 DOI: 10.1615/IHMTC-2021.3570
Numerical Analysis of Critical Factors Affecting the Efficacy of MA on Lungs Shubhamshree Avishek, Sikata Samantaray pages 2371-2376 DOI: 10.1615/IHMTC-2021.3580
Forced convection heat transfer from a semi-circular permeable cylinder to air Rajvinder Kaur, Sapna Sharma, Avinash Chandra pages 2377-2382 DOI: 10.1615/IHMTC-2021.3590
Effect of thermocouple for sodium leak detection for an annular plenum in heat exchanger R. Nandakumar, Amzad Pasha, U. Partha Sarathy pages 2383-2388 DOI: 10.1615/IHMTC-2021.3600
Numerical Simulation of Sodium Spreading under Pool Fire Scenario in SFR Cells Using the Viscous Gravity Current Model S. Muthu Saravanan, P. Mangarjuna Rao, S. Raghupathy pages 2389-2394 DOI: 10.1615/IHMTC-2021.3610
A parametric study of water draining from a rectangular tank using multiple outlets Rahul Kumar Mondal, Parmod Kumar pages 2395-2400 DOI: 10.1615/IHMTC-2021.3620
Stability of charged and uncharged pendant droplets at the tip of different size needles Debabrat Biswal, Bahni Ray, Debabrata DasGupta pages 2401-2406 DOI: 10.1615/IHMTC-2021.3630
Hydrogen Leakage in a Confined Warehouse: Distribution Pattern and Identification of Explosion Locations Anup Kundu, Mahesh Kumar Yadav, Rahul Dhamija, Divyam Kalra, Harshit Bansal, Sukhpreet Singh, Shashank Chauhan, Parvinder Kumar, Kunwar Bali pages 2407-2412 DOI: 10.1615/IHMTC-2021.3640
Numerical Simulation of Hydrogen Transport in Metal Hydride Based Coupled Beds Biju John Koshy, G. Mohan , M. Prakash Maiya pages 2413-2419 DOI: 10.1615/IHMTC-2021.3650
Concentrating Solar Powered Transcritical CO2 Power Generation Cycle for the Union Territory of Ladakh, India Syed Jiaul Hoque, Pramod Kumar, Pradip Dutta pages 2421-2426 DOI: 10.1615/IHMTC-2021.3660
Numerical investigation on melting and heat transfer characteristics of phase change material in a parallelogram enclosure Vikas Gaur, S. K. Singh pages 2427-2434 DOI: 10.1615/IHMTC-2021.3670
Study of Flow and Heat Transfer Properties for a 2D Geometry of Linear Gas Turbine Blade Cascade at Transonic Flow Condition Kain Dipendrasingh, Srinivas M V V, Arun Kumar R pages 2435-2441 DOI: 10.1615/IHMTC-2021.3680
Numerical Analysis of the Characteristics of Diesel Pool Fire in a Vented Compartment D. Nandini, P. Mangarjuna Rao, S. Raghupathy pages 2443-2449 DOI: 10.1615/IHMTC-2021.3690
Effect of roof insulation and cool paints on thermal comfort of a naturally ventilated building located in a hot and humid climate PV Sasidhar, Madalli Ramgopal pages 2451-2456 DOI: 10.1615/IHMTC-2021.3700
Cooling Characteristics of Air Jet Impinging on a Rotating Circular Disk Prahar Sarkar, Gourab Banerjee, Pranibesh Mandal, Sourav Sarkar, Achintya Mukhopadhyay, Swarnendu Sen pages 2457-2463 DOI: 10.1615/IHMTC-2021.3710
A Modular Thermal Design for Battery in Small satellites Tina Thomas, Dhananjay W. Tijare, Raghavendra Kumar, Arjun Dey pages 2465-2468 DOI: 10.1615/IHMTC-2021.3720
EFFECT OF ELLIPTICAL NOZZLE GEOMETRY ON THE HEAT TRANSFER CHARACTERISTICS OF A CURVED SURFACE Jaykumar Joshi, Pawan Sharma, Akhalesh Sharma, Santosh Kumar Sahu pages 2469-2474 DOI: 10.1615/IHMTC-2021.3730
Numerical Analysis of Carboxyl Graphene Nano-coolant in Automobile Radiator Santhosh Kumar M, Surya Solur G M, G A Gaurav Reddy, Praveen Kumar H D, Babu Rao Ponangi, R Chaitra Rao pages 2475-2480 DOI: 10.1615/IHMTC-2021.3740
Heat transfer enhancement using rectangular-winglet-type vortex- generators on the annular fins A. Kundu, A. Sinha, Gautam Biswas, Murugan Thangadurai pages 2481-2487 DOI: 10.1615/IHMTC-2021.3750
CFD Simulations of a PCM coupled heat pipe with thermal enhancers Venu Madhav H, Sujita Srichandana Dey, Venkata Raghavendra, Pramod Kumar pages 2489-2494 DOI: 10.1615/IHMTC-2021.3760
Performance Analysis of an Aerostatic Thrust Bearing Ashutosh Patel, Pramod Kumar pages 2495-2499 DOI: 10.1615/IHMTC-2021.3770
Sampling and Measurement of Tar in the Product Gas of the Downdraft Gasifier: A Case Study Bhoopendra Pandey, Pratik N. Sheth, Yogesh Kumar Prajapati pages 2501-2505 DOI: 10.1615/IHMTC-2021.3780
Computational investigation of the thermohydraulic performance of a flexible heat pipe for various bending angle, filling ratios and materials Gadi Udaybhanu, Rajalingam A, Shubhankar Chakraborty pages 2507-2513 DOI: 10.1615/IHMTC-2021.3790
Thermo-hydraulics performance of isothermally heated tube composed of the flat and circular surface Bibhu Bhusan Sha, Rajiva Lochan Mohanty, Mihir Kumar Das pages 2515-2520 DOI: 10.1615/IHMTC-2021.3800
On performance evaluation index for optimization of metal hydride based hydrogen storage devices K. Venkata Krishna, Neeraj Paul Manelil, M. Prakash Maiya pages 2521-2526 DOI: 10.1615/IHMTC-2021.3810
A comparative assessment of Ag/ZnO hybrid nanofluid with ZnO nanofluid to augment the heat transfer rate during pool boiling Pravin Omprakash Sharma, Surendra Deochand Barewar, Deepak Rajendra Unune, Sandesh Surendra Chougule pages 2527-2533 DOI: 10.1615/IHMTC-2021.3820
Thermal Simulations of Thermoelectric Coolers Akshat Patel, S. S. Sisodia, V. K. Singh, Prasanta Das, Rakesh R. Bhavsar, V. J. Lakhera pages 2535-2539 DOI: 10.1615/IHMTC-2021.3830
Experimental Investigation to Identify the Effect of Thin Metal Foam on Heat Transfer Characteristics of a Heated Plate Pradeep Kumar Singh, Jaykumar Joshi, Santosh Kumar Sahu pages 2541-2546 DOI: 10.1615/IHMTC-2021.3840
Vapor Condensation of Iso-Butane over Plain Tube and 24 fpi finned tube placed horizontally Sanjeev K. Sajjan, Ashok K. Dewangan pages 2547-2550 DOI: 10.1615/IHMTC-2021.3850
PERFORMANCE ANALYSIS OF PHASE CHANGE MATERIAL TO REDUCE THERMAL LOSSES IN LITHIUM-ION BATTERIES Shankar Durgam, Priyanka Datir, Dipak Savant, Pranav Ingle, Shashank Gupta pages 2551-2555 DOI: 10.1615/IHMTC-2021.3860
Thermo-Hydraulic Modelling of Miniature Loop Heat Pipes Chandan Nashine, Manmohan Pandey pages 2557-2562 DOI: 10.1615/IHMTC-2021.3870
Numerical Study on Heat Transfer through Modified Rectangular Fins using ANSYS Fluent Arjun Venugopal, Jacob T Varghese, Basil George Thomas pages 2563-2569 DOI: 10.1615/IHMTC-2021.3880
PREDICTION OF LIMITING CONDITIONS FOR PASSIVE COOLING OF HEATED BLOCKS UNDER VERTICAL CHANNEL: A COMPUTATIONAL INVESTIGATION Shankar Durgam, Mohan P. Khond, Ajinkya Bhosale, Vivek Bhosale pages 2571-2576 DOI: 10.1615/IHMTC-2021.3890
A Numerical Study of Transient Characteristics of Miniature Loop Heat Pipes Sharanjit Singh, Chandan Nashine, Manmohan Pandey pages 2577-2583 DOI: 10.1615/IHMTC-2021.3900
Lattice Boltzmann Method based Computation of Tumor Size Dependent Thermal Damage during Plasmonic Photothermal Therapy Amit Kumar Shaw, Sanjeev Soni pages 2585-2591 DOI: 10.1615/IHMTC-2021.3910
Response of a Choked Microchannel to Large-Amplitude Downstream Pressure Nikhil Jacob, V. Lijo pages 2593-2597 DOI: 10.1615/IHMTC-2021.3920
Design of an Experimental Rig for Assessment of Thermal Insulation Chandan Mukherjee, Sudipto Mukhopadhyay pages 2599-2604 DOI: 10.1615/IHMTC-2021.3930
Design and Simulation of a Compact Miniature Parallel Channel Heat Sink for Electronic Cooling Avanish Anand, Rohit Kumar, Manmohan Pandey pages 2605-2611 DOI: 10.1615/IHMTC-2021.3940
Numerical Study on Performance Evaluation of Multi-Tubular Sodium Alanate Hydride Reactor by Enhancing Heat and Mass Transfer Characteristics Using Nanofluids Rahul U. Urunkar, Sharad D. Patil pages 2613-2618 DOI: 10.1615/IHMTC-2021.3950
Effect of Geometry in Conjugate Heat Transfer and Fluid Flow through Triangular Copper Miniature Channels Rohit Kumar, Manmohan Pandey pages 2619-2624 DOI: 10.1615/IHMTC-2021.3960
Numerical investigation of turbulent heat transfer enhancement in partially corrugated tube using water based nanofluid Shubhanshu Rai, Shobhana Singh pages 2625-2631 DOI: 10.1615/IHMTC-2021.3970
Hybrid Power System: A Clean Renewable Energy Resource for the Development of Rural Areas in India Disha Dewangan, Jasinta Poonam Ekka pages 2633-2638 DOI: 10.1615/IHMTC-2021.3980
Effect of initial surface temperature on rewetting of a hot circular tube during air-atomized spray cooling Bhuwanesh Kumar, Ravi Kumar, Akhilesh Gupta pages 2639-2644 DOI: 10.1615/IHMTC-2021.3990
A numerical investigation of thermal behaviour of CEG/copper foam/paraffin based composite phase change material Narender Kumar, Aniket Dilip Monde, Amit Shrivastava, Prodyut R. Chakraborty pages 2645-2649 DOI: 10.1615/IHMTC-2021.4000
Wake dynamics from normal flat plates: effect of perforation orientation M Narasimha Varadhan, Abhinav Singh, Vagesh D. Narasimhamurthy pages 2651-2655 DOI: 10.1615/IHMTC-2021.4010
Performance Enhancement Investigations in a Solar Parabolic Trough Collector using Vortex Generators Mithun Srivan M M, H. Keerthi Varman, T. Srihari Vikram pages 2657-2662 DOI: 10.1615/IHMTC-2021.4020
Airflow Study in Metal Foams: Direct Simulation and Experiment Sanjeet Kumar, Sripriya Ramamoorthy, Shankar Krishnan pages 2663-2668 DOI: 10.1615/IHMTC-2021.4030
Prediction of Temperature Distribution in a Hypersonic Re-entry Capsule using DSMC Method KS Santhosh , S. Anil Lal pages 2669-2675 DOI: 10.1615/IHMTC-2021.4040
Impact of droplet on a superhydrophobic curved surface Abhishek Singh, Parmod Kumar pages 2677-2682 DOI: 10.1615/IHMTC-2021.4050
Analysis of ligaments formed during sheet atomization of non-Newtonian fluids Ashutosh Kumar Singh, Kamal Kumar Yadav, Lipika Kabiraj, Aditya Saurabh pages 2683-2690 DOI: 10.1615/IHMTC-2021.4060
Droplet Spreading Post-Impact on Inclined Solid Surfaces Tushar Srivastava, Santosh Kumar Jena, Sasidhar Kondaraju pages 2691-2695 DOI: 10.1615/IHMTC-2021.4070
Cookstove Testing: Effect of Suction Pressure of Emission Hood on the Cookstove - a Semi-Analytical Study Thirumoorthy M, Ravi M R, Sangeeta Kohli pages 2697-2702 DOI: 10.1615/IHMTC-2021.4080
Development of Dual-Wavelength Interferometry Technique for the simultaneous measurement of Concentration and Temperature Ila Thakur, Shyamprasad Karagadde, Atul Srivastava pages 2703-2708 DOI: 10.1615/IHMTC-2021.4090
Designing airflow return system for lighting fixtures Pranit Joshi pages 2709-2713 DOI: 10.1615/IHMTC-2021.4100
Numerical simulations and analysis of flow past vertical-axis wind turbines employing the actuator line method Sree Raj V, Rutvik S. Solanki, Vamsi K. Chalamalla, Sawan S. Sinha pages 2715-2720 DOI: 10.1615/IHMTC-2021.4110
Towards understanding air curtain flows using RANS based numerical simulations Tanmay Agrawal, Narsing K. Jha, Vamsi K. Chalamalla pages 2721-2726 DOI: 10.1615/IHMTC-2021.4120
Performance of passive radiant cooler of IMAGER payload through seven year designed mission life of a meteorological spacecraft Subramanya, Dhananjay W. Tijare, Neeraj K Satya, Alok Kumar Shrivastava, B.S. Akkimaradi, Thamizh Selvan, Santram, Jaikumar V, Goutam Tanneru pages 2727-2732 DOI: 10.1615/IHMTC-2021.4130
Experimental Evaluation and Characterisation of PID Controller For Spacecraft Thermal Testing Subramanya, Goutam Tanneru pages 2733-2736 DOI: 10.1615/IHMTC-2021.4140
Impingement Heat Transfer Enhancement by Synthetic Jet Array Jangyadatta Pasa, Venugopal Arumuru pages 2737-2743 DOI: 10.1615/IHMTC-2021.4150
Influence of Electrodes Orientation on Processing Capacity of Joule Heated Ceramic Melter Suneel Gattu, J. K. Gayen, K. V. Ravi pages 2745-2750 DOI: 10.1615/IHMTC-2021.4160
Stability of Rayleigh-Benard Convection in Trapezoidal Cavities Govind Maurya, Suneet Singh, Lalit Kumar pages 2751-2756 DOI: 10.1615/IHMTC-2021.4170
Influence of Spatter Size on Spatter Transport in an Additive Manufacturing Build Chamber Awad B.S. Alquaity pages 2757-2762 DOI: 10.1615/IHMTC-2021.4180
Influence of Internal Circulation on Absorption of Atmospheric CO2 and SO2 in Rain Drop T. V. Binu , Sreenivas Jayanti pages 2763-2768 DOI: 10.1615/IHMTC-2021.4190
Performance of Sharp-versus-Diffuse Interface-based Level Set Method on a Staggered-versus-Co-located grid Sanjid C S, Janani Srree Murallidharan, Atul Sharma pages 2769-2774 DOI: 10.1615/IHMTC-2021.4200
Assessment of Exergy Loss Rate in Marine Boiler to Analyze the Performance of Waste Heat Plant by the Exergy Method Jitendra Singh Pal, S.N. Sapali, T. R. Anil, N.D. Shikalgar pages 2775-2780 DOI: 10.1615/IHMTC-2021.4210
Comparison of Various RANS Models for Predicting Near-wall Flow and Heat Transfer Characteristics of a Turbulent Wall Jet Animesh Patari, Shantanu Pramanik, Tanmoy Mondal pages 2781-2787 DOI: 10.1615/IHMTC-2021.4220
On the tracking of freezing front during cryosurgery: Simulations and experiments with tissue-mimicking medium Anish A. Gunjal, Gulshan Kumar, Atul Srivastava, Milind D. Atrey pages 2789-2794 DOI: 10.1615/IHMTC-2021.4230
Mathematical Model of Rapid Depressurization of a High-Pressure Gas Bottle and Estimation of Residual Gas Sourabh Karmarkar, Reji Joseph, G Vijayakumar pages 2795-2800 DOI: 10.1615/IHMTC-2021.4240
Experimental study of local boiling heat transfer coefficient in the uniformly spaced transverse grooved horizontal tube with R-123 P. N. Tank, Gajendra Kumar, Arunkumar Sridharan, S. V. Prabhu pages 2801-2806 DOI: 10.1615/IHMTC-2021.4250
Numerical Study on Effect of Rib Shape on Cooling Performance in a Square Channel Ashkan Bagherzadeh, Masoud Darbandi pages 2807-2810 DOI: 10.1615/IHMTC-2021.4260
Experimental study of high temperature droplet evaporation on heated surface using IR visualization technique Bikash Pattanayak, B. Kothadia Hardik pages 2811-2815