カスタマーログイン ショッピングカート
ライブラリ登録: Guest
ホーム アーカイブ 役員 今後の会合

ISSN オンライン: 2688-7231

ISBN 印刷: 978-1-56700-497-7 (Flash Drive)

ISBN オンライン: 978-1-56700-496-0

Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019)
December, 28-31, 2019, IIT Roorkee, Roorkee, India

Modified Numerical Model for Solidification Shrinkage of Phase Change Materials with Large Difference in Phase Specific Heat and Density

Get access DOI: 10.1615/IHMTC-2019.940
pages 557-562

要約

Phase change material (PCM) can be used as the storage material because of its high energy density. Most of the PCMs used in the fields of thermal engineering have large phase difference in thermophysical properties, i.e. density, specific heat, and thermal conductivity. During the melting and solidification cycles of PCMs, the phase density difference often causes undesirable shrinkage void formation and residual stresses. These shrinkage voids affect the heat transfer performance of PCM based thermal energy storage systems. Some metallic PCMs have large phase differences in density and specific heats. In the present work, an energy equation is developed by incorporating different specific heats and densities for different phases. Continuity equation and energy equation are derived from the first principle to obtain the source terms. Numerical simulation is carried out using octadecane as the PCM. Two case studies are considered. In the first case, the densities are kept the same, while specific heats of two phases are taken differently. In the second study, both specific heats and densities are taken differently for different phases. The numerical results are validated with experimental results reported in the literature.
ホーム アーカイブ 役員 今後の会合 English Русский 中文 Português ヘルプ 問合せ先 ISHMTへ戻る