Login do cliente Carrinho de compras
Inscrição na biblioteca: Guest
Início Arquivos Representantes Futuras reuniões

ISBN : 978-1-56700-478-6

Proceedings of the 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017)
2017, December 27-30 , BITS Pilani, Hyderabad, India


Get access DOI: 10.1615/IHMTC-2017.230
pages 161-169


The objective of this study was to provide preliminary cycle designs for cryogenic rocket engines which power upper stages of a launch vehicle. The work describes the development of a computer model to perform thermodynamic analysis of LOX/Methane expander cycles for a liquid rocket engine pumpfed propellant feed system. LOX/Methane as a propellant has advantages of providing higher specific impulse and low soot combustion compared to RP-1. In contrast to LH2, it provides superior storability, higher fuel density, boiling temperatures and vapour pressure.

The outlet temperature obtained from the regenerative cooling portion of the nozzle is about 383 K for the chamber pressure of 6 MPa. The temperature is found to sustain the entire power cycle for the given thrust value of 100 kN. The completed cycle analysis program was validated against the literature data available on closed expander cycle developed for liquid rocket engines RL10 burning propellant combination LOX/LH2. In the analysis, the open cycle was found to operate with the minimum turbine power of 0.384 MW for the mission desired thrust of 100 kN and operating at a combustion chamber pressure of 6 MPa. The present work relates to the detailed comparison of the performances for several other variations of expander cycles namely closed dual expander cycle, closed split expander cycle, closed dual-split expander cycle, open expander cycle and gas generator augmented expander cycles to identify the optimum variant. The open expander cycle consumed the least power for all the operating conditions whereas the split expander cycle is found to consume lower power in the closed expander cycles operating at chamber pressures below 3.5 MPa.
Início Arquivos Representantes Futuras reuniões Português English Русский 中文 Ajuda Entre em contato conosco Voltar para ISHMT