Войти Корзина покупок
Доступ предоставлен для: Guest
Главная Архив Оргкомитет Будущие конференции

ISSN Online: 2688-7231

ISBN Online: 978-1-56700-524-0

Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India
December, 17-20, 2021, IIT Madras, Chennai, India

Numerical Studies of a supersonic Air Ejector using Large Eddy Simulation

Get access DOI: 10.1615/IHMTC-2021.940
pages 631-636


An ejector is a heat-driven device that compresses a low-pressure secondary flow by gasdynamics interactions with a co-flowing high-pressure primary flow. Ejectors have been employed in multiple engineering domains, including mechanical, aerospace, and energy conversion management systems. The performance of ejectors mainly depends on the mixing of the primary and secondary flows. Typical Reynolds numbers inside ejector are in the order of ~106. Therefore, most previous studies have adopted RANS-based turbulence models for ejector analysis. The global properties such as entrainment and compression ratios have been estimated accurately with RANS-based models. However, local flow structures have not been well predicted. This work investigates the gasdynamic structures arising due to the mixing of the primary and secondary flows within an ejector for the critical flow regime using a large eddy simulations model. The deviations between CFD estimated and experimentally measured ER and non-mixed length are 17% and 4%, respectively. The flow instabilities associated with the mixing and re-compression shock structures are captured well with the LES model.
Главная Архив Оргкомитет Будущие конференции Русский English 中文 Português Помощь Контакты Назад в ISHMT