
ISSN Online: 2688-7231
ISBN Online: 978-1-56700-524-0
Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India
Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India
Содержание:
A Numerical Method to Optimise Warm-up Time of Thick Film Platinum Heaters by Designing Applied Voltage Profile
pages 1-7
DOI: 10.1615/IHMTC-2021.10
Comparison of wake characteristics behind a custom designed airfoil performing different types of flapping oscillations
pages 9-14
DOI: 10.1615/IHMTC-2021.20
Direct Contact Membrane Distillation Coupled with Solar Collector: A Numerical Study
pages 15-21
DOI: 10.1615/IHMTC-2021.30
Experimental investigation on effect of wettability pattern in the condensation heat transfer performance of vertical square aluminium tube
pages 23-29
DOI: 10.1615/IHMTC-2021.40
Natural Convection in a Porous Trapezoidal Enclosure with Non-uniform Heating
pages 31-38
DOI: 10.1615/IHMTC-2021.50
FORCED AND MIXED CONVECTION EFFECT OF Al2O3/WATER NANOFLUID ON THE CONJUGATE THERMAL PERFORMANCE OF STEPPED LID-DRIVEN CAVITY UNDER TURBULENT FLOW CONDITIONS
pages 39-45
DOI: 10.1615/IHMTC-2021.60
Numerical Study of Methanol Steam Reformation in a Micro-Solar Thermal Collector for Producing Hydrogen
pages 47-52
DOI: 10.1615/IHMTC-2021.70
Effect of mass ratio on the response of an upstream truncated circular cylinder
pages 53-57
DOI: 10.1615/IHMTC-2021.80
Impact of flow direction and mass flow rate on the melting process for simultaneous charging and discharging based latent heat storage system
pages 59-64
DOI: 10.1615/IHMTC-2021.90
Heat Transfer Coefficient of Water Wall for Commercial Circulating Fluidized Bed Combustion (CFBC) boilers
pages 65-70
DOI: 10.1615/IHMTC-2021.100
Microscopic Heat Transfer Mechanisms associated with Single Bubble-based Pool Boiling of SiO2-water Nanofluids on Hydrophobic surface
pages 71-76
DOI: 10.1615/IHMTC-2021.110
Heat Transfer Augmentation with Thermal Energy Storage System in Paraffin Wax, Using Al2O3 Nanomaterial
pages 77-83
DOI: 10.1615/IHMTC-2021.120
Entropy Generation due to Natural Convection from a Pair of Two Tilted Square Cylinders
pages 85-90
DOI: 10.1615/IHMTC-2021.130
Turbulent Characteristics of Coaxial non-reacting Offset Jets
pages 91-96
DOI: 10.1615/IHMTC-2021.140
Computational Analysis of Horizontal type Mixed Mode Forced Convective Solar Dryer
pages 97-103
DOI: 10.1615/IHMTC-2021.150
Heat Transfer Enhancement of Horizontal Wing Cut Using Concentric Tube
pages 105-110
DOI: 10.1615/IHMTC-2021.160
MATHEMATICAL MODELLING OF FRICTIONAL HEATING IN RECIPROCATING SLIDING CONDITIONS
pages 111-116
DOI: 10.1615/IHMTC-2021.170
Numerical Simulation of Latent Heat Thermal Energy Storage Incorporated Solar Water Heater
pages 117-123
DOI: 10.1615/IHMTC-2021.180
Aerothermodynamic of Drag by Using Spike and Counter-flow Jet Techniques in Reacting Hypersonic Flows
pages 125-131
DOI: 10.1615/IHMTC-2021.190
Heat transfer enhancement using multi jet impingement with and without rotation
pages 133-139
DOI: 10.1615/IHMTC-2021.200
Experimental and numerical investigation of the influence of geometrical parameters on the performance of plate heat exchangers
pages 141-147
DOI: 10.1615/IHMTC-2021.210
Convective Heat Transfer Enhancement by Array of Jets Impingement
pages 149-152
DOI: 10.1615/IHMTC-2021.220
Lab level testing and ballistic performance analysis of a LO2/HTPB+20%Al hybrid motor configuration
pages 153-159
DOI: 10.1615/IHMTC-2021.230
Numerical investigation of sonic injection into supersonic crossflow through different injectors operating at varying dynamic pressure ratios
pages 161-167
DOI: 10.1615/IHMTC-2021.240
Hydrodynamic Performance Investigation of Horizontal Axis Water Rotors
pages 169-174
DOI: 10.1615/IHMTC-2021.250
Numerical Investigation of Energy Deposition based Drag Reduction Technique for Reacting Flows
pages 175-180
DOI: 10.1615/IHMTC-2021.260
Experimental Analysis of the Post Dryout Flow Regimes Encountered during Rewetting by Bottom Flooding using High Speed Chrono-photography
pages 181-186
DOI: 10.1615/IHMTC-2021.270
On Drag and Heat flux by Integration of Cavity and Counter-jet in Reacting Non-equilibrium Flows
pages 187-193
DOI: 10.1615/IHMTC-2021.280
Effect of Thermal Buoyancy on a Fluid Flow across Six Inline Square Heated Cylinders
pages 195-201
DOI: 10.1615/IHMTC-2021.290
An analytical study to investigate the effect of partial loss of coolant from the vicinity of nuclear fuel plate
pages 203-208
DOI: 10.1615/IHMTC-2021.300
Management of Thermal Runaway in Batteries using Water Mist for Air Precooling
pages 209-215
DOI: 10.1615/IHMTC-2021.310
CFD simulation of inside room with rooftop enveloped radiative cooler
pages 231-236
DOI: 10.1615/IHMTC-2021.340
Effect of leading edge bluntness on the interaction of laminar boundary layer with induced shock wave
pages 237-242
DOI: 10.1615/IHMTC-2021.350
Spectrally selective multi-functional floating absorber with heat localization, 2-D water transport and improved evaporation potential for enhanced freshwater productivity
pages 243-249
DOI: 10.1615/IHMTC-2021.360
Numerical analysis of spiral channelled cooling plates for thermal management of pouch battery module
pages 251-256
DOI: 10.1615/IHMTC-2021.370
Natural Convection from a Confined Sphere in Yield stress Fluids
pages 257-263
DOI: 10.1615/IHMTC-2021.380
A Real Gas Property-Based Thermodynamic Investigation of Ejector Based Refrigeration System for Automotive Applications
pages 265-270
DOI: 10.1615/IHMTC-2021.390
Investigation of heat transfer and fluid flow characteristics of optimised drop shape pin fin heat sink under natural convection
pages 271-277
DOI: 10.1615/IHMTC-2021.400
Performance Investigation of Waste Heat Assisted and Evacuated Tube Collector based Solar Still
pages 279-284
DOI: 10.1615/IHMTC-2021.410
Modelling and control of parabolic trough field system for feed water heating application
pages 285-290
DOI: 10.1615/IHMTC-2021.420
Three-Dimensional Simulations of Bubble Rise in a Sinusoidal Channel
pages 291-297
DOI: 10.1615/IHMTC-2021.430
Exploration of Fractal Patterns in Cold Plate Flow Path Design to Enhance the Heat Transfer Performance of IC Chips
pages 299-304
DOI: 10.1615/IHMTC-2021.440
Solar Drying Characteristics of Grapes Using a Heat and Mass Transfer Based Mathematical Model
pages 305-310
DOI: 10.1615/IHMTC-2021.450
Investigation of counter flow vortex tube with insulation and its effects on the thermal performance using a computational fluid dynamic approach
pages 311-316
DOI: 10.1615/IHMTC-2021.460
Predicting Interfacial Heat Transfer Coefficient in CO2-Mould Sand Casting of Steel Using Machine Learning Algorithms
pages 317-322
DOI: 10.1615/IHMTC-2021.470
CHF studies on the bottom facing heated flat surface, simulating the calandria vessel of Indian PHWR during core meltdown accident
pages 323-328
DOI: 10.1615/IHMTC-2021.480
Parametric Study of Hybrid Vapour Absorption Refrigeration System (VARS) with Humidification-Dehumidification (HDH) Desalination
pages 329-335
DOI: 10.1615/IHMTC-2021.490
Design of Air Flow System for a forced Draught Gasifier Cookstove
pages 337-342
DOI: 10.1615/IHMTC-2021.500
Comparative Assessment of Modelling Parameters for Prediction of Methane from a Downdraft Biomass Gasifier
pages 343-348
DOI: 10.1615/IHMTC-2021.510
HEAT TRANSFER PERFORMANCE OF HYBRID (Fe3O4 + SiC) NANOFLUID − AN EXPERIMENTAL STUDY
pages 349-354
DOI: 10.1615/IHMTC-2021.520
Estimation of Higher Heating Value of Biomass from Basic Analysis on Dry Ash-Free Basis
pages 355-359
DOI: 10.1615/IHMTC-2021.530
Study of a Waste Heat Recovery Cycle Using Super-Critical Carbon Dioxide as Working Fluid
pages 361-367
DOI: 10.1615/IHMTC-2021.540
Modelling and Parametric analysis of Reduction of Thermal Load inside Vehicle Cabin
pages 369-372
DOI: 10.1615/IHMTC-2021.550
Thermal management of battery module using PCM and nanoparticle composite
pages 373-379
DOI: 10.1615/IHMTC-2021.560
Effect of Natural Convection on Melting Characteristics of Encapsulated PCM
pages 381-386
DOI: 10.1615/IHMTC-2021.570
Modelling and Simulation of Human Respiratory Droplet Transport: Cloud Evaporation Effect
pages 387-393
DOI: 10.1615/IHMTC-2021.580
Three-dimensional pore scale modelling of PCM-metal foam composites for energy storage
pages 395-400
DOI: 10.1615/IHMTC-2021.590
Development of a numerical model for cell shrinkage during cryopreservation of cells
pages 401-406
DOI: 10.1615/IHMTC-2021.600
A numerical and experimental based thermo-hydraulic performance analysis of a solar air heater having a forward NACA ribs roughness on the absorber plate
pages 407-412
DOI: 10.1615/IHMTC-2021.610
Investigation of Thermal Contact Conductance Across Pressed Bi-Metallic Aerospace Joints at Low Temperature
pages 413-418
DOI: 10.1615/IHMTC-2021.620
Micro-scale solidification and micro-segregation during laser spot melting of binary alloys
pages 419-423
DOI: 10.1615/IHMTC-2021.630
Numerical simulation of station blackout transients in spent fuel pool of nuclear power plants
pages 425-431
DOI: 10.1615/IHMTC-2021.640
Thermosyphon based thermal management of high heat flux electronics
pages 433-438
DOI: 10.1615/IHMTC-2021.650
Computational Fluid Dynamics Analysis of Turbulent Hybrid Nano-Oil Flow through a Long Heated Tube
pages 439-444
DOI: 10.1615/IHMTC-2021.660
Evaluation of thermal performance of passive indirect solar water heating system using thermal oil-based hybrid nanofluids.
pages 445-451
DOI: 10.1615/IHMTC-2021.670
Four E's (Energetic, Exergetic, Enviro-economic) investigation of air HX assisted with various TTI using THyNF
pages 453-459
DOI: 10.1615/IHMTC-2021.680
Waste Heat Recovery of A Diesel Engine Exhaust by A Combined Power and Cooling System Comprising of Reheat Organic Rankine Cycle and Absorption Refrigerator
pages 461-466
DOI: 10.1615/IHMTC-2021.690
Estimation of Interfacial Mass Flux for Convection-induced Evaporation of Water inside a Partly-filled Enclosure
pages 467-472
DOI: 10.1615/IHMTC-2021.700
Simulation of spreading of a water droplet on a partially wetted substrate at a low Weber number using an improved contact angle model
pages 473-478
DOI: 10.1615/IHMTC-2021.710
CFD Analysis of Air Cooled IC Engine Fins in the Presence of an Obstruction Placed Upstream at Low Ambient Temperatures
pages 479-485
DOI: 10.1615/IHMTC-2021.720
Experimental Evaluation of a Pebble-bed Thermal Energy Storage for Solar Convective Furnace
pages 487-492
DOI: 10.1615/IHMTC-2021.730
Performance analysis of microchannel heat sink with converging secondary channels
pages 493-499
DOI: 10.1615/IHMTC-2021.740
Exergy Destruction and Drag Reduction for Opposing Jet Technique in Presence of Real Gas Reactions
pages 501-507
DOI: 10.1615/IHMTC-2021.750
Melting and solidification of metal matrix nanocomposites during laser melting
pages 509-514
DOI: 10.1615/IHMTC-2021.760
Thermal and Hydraulic Performance Evaluation of fluid pumped space radiators with series and parallel flow paths
pages 515-521
DOI: 10.1615/IHMTC-2021.770
Heat and Mass Transfer Characteristics of Intermittent Drying
pages 523-529
DOI: 10.1615/IHMTC-2021.780
Energy efficiency of a sensible energy storage system with multi-tubular passages and coil inserts
pages 531-534
DOI: 10.1615/IHMTC-2021.790
Physics-Informed Neural Network: Application to spacecraft thermal modelling
pages 535-538
DOI: 10.1615/IHMTC-2021.800
Numerical study of combustion and emission performance on a multi-holed gasoline direct injection engine with and without flash boiling spray
pages 539-545
DOI: 10.1615/IHMTC-2021.810
Studies on Ambient Temperature Variation in Launch Vehicle Compartments during Depressurization
pages 547-552
DOI: 10.1615/IHMTC-2021.820
PERFORMANCE IMPROVEMENT OF SOLAR AIR HEATER USING JET IMPINGEMENT COOLING: AN EXPERIMENTAL STUDY
pages 553-558
DOI: 10.1615/IHMTC-2021.830
Effect of change in orbital parameters on the thermal management scheme of a Nano Satellite
pages 559-564
DOI: 10.1615/IHMTC-2021.840
Thermal Control System for Magnetometer Boom Instrument (MBI)
pages 565-568
DOI: 10.1615/IHMTC-2021.850
Hybrid Nanofluid Based MHD Thermogravitational Convection in a Porous Cavity Heated Linearly
pages 569-575
DOI: 10.1615/IHMTC-2021.860
Numerical Investigation of Thermal Energy Storage using Magnesium Nickel Hydride
pages 577-583
DOI: 10.1615/IHMTC-2021.870
Thermal Performance Evaluation of Cascade Latent Heat Storage
pages 585-591
DOI: 10.1615/IHMTC-2021.880
Investigation of Temperature Polarization in Membrane Distillation with Localized Heating in Feed Channel
pages 593-599
DOI: 10.1615/IHMTC-2021.890
Effect of Circumferential Grooves on Two-phase Flow in the Parabolic Trough Solar Collector
pages 601-607
DOI: 10.1615/IHMTC-2021.900
Experimental investigation of Urea-water solution (UWS) spray impingement on a heated flat surface
pages 609-615
DOI: 10.1615/IHMTC-2021.910
Theoretical Investigation of Thermo-hydraulic characteristics of Shell and Tube Heat Exchanger
pages 617-621
DOI: 10.1615/IHMTC-2021.920
The numerical analysis of spray formation for GDI system using dynamically coupled internal nozzle flow and ELSA spray simulation
pages 623-629
DOI: 10.1615/IHMTC-2021.930
Numerical Studies of a supersonic Air Ejector using Large Eddy Simulation
pages 631-636
DOI: 10.1615/IHMTC-2021.940
Analysis of Self-Excited Combustion Instability in a Sub-scale Rocket Engine Using Large Eddy Simulation
pages 637-643
DOI: 10.1615/IHMTC-2021.950
Numerical Analysis of a Flat Plate Solar Collector Integrated with Porous Copper Foam
pages 645-651
DOI: 10.1615/IHMTC-2021.960
Analysis of Compression Ignition Engine Performance and Emission Parameters using Simulink at Different Engine Operating Conditions
pages 653-658
DOI: 10.1615/IHMTC-2021.970
Thermal Performance Analysis of Wickless Heat Pipe Heat Exchanger using De-Ionized (DI) Water as Working Fluid
pages 659-663
DOI: 10.1615/IHMTC-2021.980
Two Phase Modeling of Mixed Convection in Nanofluids inside a Lid-driven Cavity for Various Aspect Ratios
pages 665-670
DOI: 10.1615/IHMTC-2021.990
Effect of surface roughness on water droplet's disintegration mechanism in different heat transfer regimes
pages 671-677
DOI: 10.1615/IHMTC-2021.1000
Comparative Combustion Performance of Swirl Coaxial Injectors
pages 679-683
DOI: 10.1615/IHMTC-2021.1010
Numerical analyses of re-entry module - Apex cover separation aerodynamics at subsonic Mach number
pages 685-689
DOI: 10.1615/IHMTC-2021.1020
Effective pressure drop and electroosmotic mixing in micro slits due to slip length variation and micro corrugation
pages 691-696
DOI: 10.1615/IHMTC-2021.1030
Windward Centreline laminar heating rates of Space Shuttle orbiter configuration at STS-2 flight re-entry condition and its comparison with flight data
pages 697-701
DOI: 10.1615/IHMTC-2021.1040
Numerical analysis of supercritical CO2 nozzle on the ejector performance
pages 703-708
DOI: 10.1615/IHMTC-2021.1050
Numerical Analysis of Heat Transfer Performance of Double Layer Microchannel Heat Sink with Semi-circular Bumps and Slits
pages 709-714
DOI: 10.1615/IHMTC-2021.1060
Estimation of Ground Temperature for Installation of Earth Air Tunnel for Hot and Humid Climatic Conditions
pages 715-720
DOI: 10.1615/IHMTC-2021.1070
Effective pressure drop and electrokinetic flow influence on blood flow in a rectangular micro slit with sudden expansion
pages 721-726
DOI: 10.1615/IHMTC-2021.1080
Multi-Objective Optimization of the Vapour Cycle System of an Aircraft Environmental Control System using Exergy Analysis
pages 727-732
DOI: 10.1615/IHMTC-2021.1090
Flow characteristics and platelet adhesion of blood flow in a corrugated microchannel with the reduction and extension of shear effects.
pages 739-745
DOI: 10.1615/IHMTC-2021.1110
Estimation of hydrodynamic performance of microchannel heat sink with microstructures of various size and shapes − A comprehensive study
pages 747-753
DOI: 10.1615/IHMTC-2021.1120
Deep Neural Network for solving forward and inverse problems in heat transfer
pages 755-760
DOI: 10.1615/IHMTC-2021.1130
A Numerical Investigation of Charging a High-Temperature Latent Heat Storage Unit : A Variable Domain Methodology
pages 761-767
DOI: 10.1615/IHMTC-2021.1140
Electro-osmosis over an arbitrarily-shaped periodic surface
pages 769-774
DOI: 10.1615/IHMTC-2021.1150
Oscillating bubbles: Nonlinear corrections to the Minnaert frequency
pages 775-779
DOI: 10.1615/IHMTC-2021.1160
Lattice Boltzmann Simulation of Convective Heat Transfer from Embedded Surface Heaters in a Laminar Wall Jet Flow
pages 781-787
DOI: 10.1615/IHMTC-2021.1170
Design Verification of Modified Outlet of a Cryogenic Oxidiser Tank through CFD Simulations
pages 789-794
DOI: 10.1615/IHMTC-2021.1180
Heat transfer enhancement in microchannel with different surface undulations
pages 795-800
DOI: 10.1615/IHMTC-2021.1190
CFD Analysis of High Altitude Test Facility for Off-Design Operation
pages 801-806
DOI: 10.1615/IHMTC-2021.1200
Thermal Performance of a Closed-Loop Flat Plate Pulsating Heat Pipe Filled with Water-based Binary Mixtures
pages 807-813
DOI: 10.1615/IHMTC-2021.1210
Numerical study of supercritical natural circulation loop under condition of different inclination ad diameter
pages 815-819
DOI: 10.1615/IHMTC-2021.1220
Heat Transfer Augmentation of Air-Ferrofluid Taylor Bubble Flow in Presence of a Magnet
pages 821-825
DOI: 10.1615/IHMTC-2021.1230
Thermal Performance and Flow Characteristics of Elliptical Finned Tube Heat Exchanger with Novel Fin Design
pages 827-833
DOI: 10.1615/IHMTC-2021.1240
Numerical Investigation on Heat Transfer Coefficient of Supercritical CO2 in a extended surface Micro Heat-sink
pages 835-840
DOI: 10.1615/IHMTC-2021.1250
Lattice Boltzmann Simulation of Oscillatory behaviour of Horizontal Vents at High Rayleigh number
pages 841-846
DOI: 10.1615/IHMTC-2021.1260
Thermal parameter estimation in a two-dimensional irregular heat conducting body using the Bayesian approach
pages 847-852
DOI: 10.1615/IHMTC-2021.1270
Numerical estimation of sublimation front position in spin frozen skimmed milk during immersion drying method
pages 853-858
DOI: 10.1615/IHMTC-2021.1280
Numerical Investigation of Buoyancy-assisted and -opposed flows in the Laminar Regime of Mixed Convection through a Vertical Channel
pages 859-865
DOI: 10.1615/IHMTC-2021.1290
Estimation of Human Body Core Temperature from Measured Heart Rate using Kalman Filter Models
pages 873-878
DOI: 10.1615/IHMTC-2021.1310
Numerical investigation on the flow and thermal behaviour of synthetic jet with different waveforms
pages 879-884
DOI: 10.1615/IHMTC-2021.1320
Non-Oberbeck-Boussinesq Effects in Natural Convection to Shear-Thinning Power-Law Fluids
pages 885-890
DOI: 10.1615/IHMTC-2021.1330
Mathematical Modeling of Dropwise Condensation of Pure Vapor on a Horizontal Tube
pages 891-896
DOI: 10.1615/IHMTC-2021.1340
Transient Analysis of a Parallel Channel Single Phase Natural Circulation Loop
pages 897-902
DOI: 10.1615/IHMTC-2021.1350
Nanobubble Formation in a Viscous Liquid due to Rotation of a Nanoparticle - a Molecular Dynamics Study
pages 903-908
DOI: 10.1615/IHMTC-2021.1360
Numerical modeling of the thermal performance of a two-phase flat thermosyphon
pages 909-914
DOI: 10.1615/IHMTC-2021.1370
Numerical Investigations on Combined slot and effusion Film cooling of an Annular combustor Liner
pages 915-921
DOI: 10.1615/IHMTC-2021.1380
Effect of Surface Radiation on Natural Convection Heat transfer from a Helical Coil
pages 923-928
DOI: 10.1615/IHMTC-2021.1390
ESTIMATION OF DRYING KINETICS, PERFORMANCE PARAMETERS AND RESULTS COMPARISON OF NATURAL AND FORCED CONVECTION INDIRECT TYPE SOLAR DRYERS DURING DRYING IVY GOURD
pages 929-934
DOI: 10.1615/IHMTC-2021.1400
Numerical Study of Falling Film Evaporation on a Horizontal Tube Bundle
pages 935-942
DOI: 10.1615/IHMTC-2021.1410
A TWO-PHASE NUMERICAL COMPARISON BETWEEN A SUBMERGED NOZZLE AND AN EXTERNAL NOZZLE FOR A SOLID ROCKET MOTOR
pages 943-948
DOI: 10.1615/IHMTC-2021.1420
Improved cooling system of Li-ion batteries by axial water flow through the core
pages 949-955
DOI: 10.1615/IHMTC-2021.1430
Thermal Performance Enhancement in Cross-Flow Helical Tube Heat Exchanger by Modification of Tube Cross-Section
pages 957-962
DOI: 10.1615/IHMTC-2021.1440
Effect of Intake Location of Containment Filtered Venting System on Activity Transport in Containment and Source Term
pages 963-968
DOI: 10.1615/IHMTC-2021.1450
Cartesian Grid-based DSMC-NS Coupled Simulation Methodology for Continuum-Rarefied Gas Flows
pages 969-973
DOI: 10.1615/IHMTC-2021.1460
Assessment of BML flamelet and EDM combustion models for turbulent premixed hydrogen combustion using FLUIDYN-MP
pages 975-980
DOI: 10.1615/IHMTC-2021.1470
Characterization of PCM based heat sinks for various power surge durations and intervals: An experimental study
pages 981-986
DOI: 10.1615/IHMTC-2021.1480
An inverse method to estimate temperature-dependent viscosity of a liquid
pages 987-990
DOI: 10.1615/IHMTC-2021.1490
Analytical Modeling of Steam-Air Bubble Dynamics in Sub-Cooled Water Pool
pages 991-996
DOI: 10.1615/IHMTC-2021.1500
Study of interfacial thermal resistance in boron nitride nanotube (BNNT)-water interface
pages 997-1002
DOI: 10.1615/IHMTC-2021.1510
Parametric Analysis of Pulsating Heat Pipes for Space Applications
pages 1003-1007
DOI: 10.1615/IHMTC-2021.1520
Development of Numerical model for Analysing Transients of Two-Phase Natural Circulation Loops (NCLs)
pages 1009-1014
DOI: 10.1615/IHMTC-2021.1530
Flow-induced electrohydrodynamics in a nanochannel with finite temperature gradient
pages 1015-1019
DOI: 10.1615/IHMTC-2021.1540
Computational and Experimental Investigation on the Breast Tumor Depth Characteristics Performed using Infrared Thermography
pages 1021-1027
DOI: 10.1615/IHMTC-2021.1550
Sizing of Insulation Panels with a Coupled Conduction and Radiation Heat Transfer Model
pages 1029-1035
DOI: 10.1615/IHMTC-2021.1560
Numerical computation of time lag and decrement factor for different building wall materials
pages 1037-1042
DOI: 10.1615/IHMTC-2021.1570
Liquid structuring of confined organic coolant in nanochannels. A comparative study with water
pages 1043-1048
DOI: 10.1615/IHMTC-2021.1580
Numerical Study of Heat Transfer Characteristics in Helical Coils with Sinusoidal Wavy Walls
pages 1049-1055
DOI: 10.1615/IHMTC-2021.1590
Thermo-fluid analysis of parabolic trough receiver using different gases
pages 1057-1063
DOI: 10.1615/IHMTC-2021.1600
Prediction of hydrate growth front using electrical resistance in a cylindrical reactor
pages 1065-1067
DOI: 10.1615/IHMTC-2021.1610
Design of Compact Heat Exchanger for Channelising the Low-Temperature Waste Heat from Internal Combustion Engines using Organic Rankine Cycle
pages 1069-1074
DOI: 10.1615/IHMTC-2021.1620
Numerical Investigation of Steam Injection in Subcooled Water
pages 1075-1080
DOI: 10.1615/IHMTC-2021.1630
Design of Parabolic Reflector Heater Module for High Heat Flux Simulation
pages 1081-1086
DOI: 10.1615/IHMTC-2021.1640
EFFECT OF MOISTURE ON CONVECTION HEAT TRANSFER THROUGH ROOFTOP SOLAR CHIMNEY
pages 1087-1092
DOI: 10.1615/IHMTC-2021.1650
RADIATIVE TRANSFER ANALYSIS OF ROOFTOP SOLAR CHIMNEY BY TREATING MOIST AIR AS PARTICIPATING MEDIA
pages 1093-1099
DOI: 10.1615/IHMTC-2021.1660
Influence of Central Angle on Buoyancy Driven Thermal Flow Behaviours inside a Circular Porous Enclosure Heating from below
pages 1101-1106
DOI: 10.1615/IHMTC-2021.1670
Guidelines for type and order of quadrature in discrete ordinates method for radiative transfer in plane parallel medium
pages 1107-1113
DOI: 10.1615/IHMTC-2021.1680
ASSESSMENT OF A HYBRID SOLUTION APPROACH FOR THE SOLUTION OF THE RADIATIVE TRANSFER EQUATION IN COMBUSTION GASES
pages 1115-1120
DOI: 10.1615/IHMTC-2021.1690
Thermal effects on flow through micronozzles with various geometries
pages 1121-1126
DOI: 10.1615/IHMTC-2021.1700
Electro-Magneto-Hydrodynamics of Shear Driven Microscale Flows
pages 1127-1131
DOI: 10.1615/IHMTC-2021.1710
Design and Experimental Investigation on Liquid Nitrogen Cryoprobe for Cryosurgery
pages 1133-1138
DOI: 10.1615/IHMTC-2021.1720
A low-cost hybrid solar simulator for longer time scale thermal applications
pages 1139-1143
DOI: 10.1615/IHMTC-2021.1730
Numerical investigation on heat transfer characteristics during spray evaporation of water
pages 1145-1149
DOI: 10.1615/IHMTC-2021.1740
Computational study on jet break-up behavior of a high-density liquid jet entering a quiescent immiscible liquid pool
pages 1151-1157
DOI: 10.1615/IHMTC-2021.1750
Electrical-Thermal design of liquid cooled battery pack for Electric vehicles
pages 1159-1165
DOI: 10.1615/IHMTC-2021.1760
CFD analysis of single nozzle air ejector system used in aircraft Compact Heat Exchanger applications
pages 1167-1172
DOI: 10.1615/IHMTC-2021.1770
Collision of steam bubbles in a vertical rectangular channel containing subcooled liquid
pages 1173-1179
DOI: 10.1615/IHMTC-2021.1780
Thermal Performance Studies on a Packed Bed Regenerator Using Wire Screen Matrix Air Heater
pages 1181-1187
DOI: 10.1615/IHMTC-2021.1790
Electromigration Dispersion of Power Law Fluid in a microcapillary
pages 1189-1195
DOI: 10.1615/IHMTC-2021.1800
General pressure equation based algorithm for solving incompressible flow equations on collocated grids
pages 1197-1203
DOI: 10.1615/IHMTC-2021.1810
Numerical Study of Sodium Flow Boiling Characteristics in a Narrow Tubular Channel by Developing an Eulerian-Eulerian Model
pages 1205-1210
DOI: 10.1615/IHMTC-2021.1820
Numerical investigation of heat transfer characteristics of a double-pass solar air heater with an eccentric absorber plate
pages 1211-1215
DOI: 10.1615/IHMTC-2021.1830
Analysis of Heat Transfer and Phase Change Phenomenon between Liquid Sodium and Fuel Vapor under Energetic CDA in SFR
pages 1217-1222
DOI: 10.1615/IHMTC-2021.1840
Numerical Investigation of Wettability and its Effects on Flow through Textured Micro-channels using Lattice Boltzmann Method
pages 1223-1229
DOI: 10.1615/IHMTC-2021.1850
Thermal Performance of Square, Circular and Rectangular Earth-Tube Air Heat Exchanger- A Numerical Study
pages 1231-1237
DOI: 10.1615/IHMTC-2021.1860
Numerical Study on Rayleigh−Benard Convection in a Wavy Enclosure Containing CuO-Water Nanofluid
pages 1239-1244
DOI: 10.1615/IHMTC-2021.1870
Design and CFD Analysis of Compact Fuel Jet Pump for a Typical Combat Aircraft Fuel System Applications
pages 1245-1251
DOI: 10.1615/IHMTC-2021.1880
Fuel Sloshing Studies in an Inverted Flight Compartment of a Typical Combat Aircraft
pages 1253-1258
DOI: 10.1615/IHMTC-2021.1890
Heat Transfer Characteristics of electrochemical cell − A numerical study
pages 1259-1265
DOI: 10.1615/IHMTC-2021.1900
Thermal Modelling of Loop Heat Pipe for Long Duration Space Missions
pages 1267-1272
DOI: 10.1615/IHMTC-2021.1910
CFD Simulation of Lean Hydrogen Deflagration in Large Confined Volume of THAI Facility
pages 1273-1279
DOI: 10.1615/IHMTC-2021.1920
Performance Prediction of Combat Aircraft Fuel Jettisoning System Using Modelling and Simulation Approach
pages 1281-1287
DOI: 10.1615/IHMTC-2021.1930
Numerical Analysis of Drying Kinetics of Spherical Products in a Solar Dryer
pages 1289-1294
DOI: 10.1615/IHMTC-2021.1940
Numerical investigation of a multi tube combined latent and sensible heat thermal energy storage system
pages 1295-1300
DOI: 10.1615/IHMTC-2021.1950
Performance Investigations of the Energy Discharge Characteristics of High-temperature Phase Change Material Capsules
pages 1301-1306
DOI: 10.1615/IHMTC-2021.1960
Numerical Study on Optimisation of the Discharging Characteristics of Three-PCM Cascaded Latent Heat Storage System with Non-uniform Fin Distribution
pages 1307-1313
DOI: 10.1615/IHMTC-2021.1970
Effect of Pitch and Tube arrangement on the Thermal Performance of Earth-Air Heat Exchanger − A Numerical Study
pages 1315-1320
DOI: 10.1615/IHMTC-2021.1980
3D Computational Fluid Dynamics Analysis to Predict Poison Jet Growth in Moderator inside Calandria during SDS#2 actuation
pages 1321-1325
DOI: 10.1615/IHMTC-2021.1990
3D Computational Fluid Dynamics Analysis to Estimate Temperature Distribution of Spent Fuel Bundle during Dry Transfer Operation
pages 1327-1330
DOI: 10.1615/IHMTC-2021.2000
Experimental Study of Lift-off Dynamic Seal for LOX-Kerosene Engine
pages 1331-1335
DOI: 10.1615/IHMTC-2021.2010
Heat transfer enhancement in a PCM-based shell-and-tube-type thermal-energy storage device with nano-particle enhancement, addition of triangular annular fins, fin pitch, and HTF flow reversal
pages 1343-1350
DOI: 10.1615/IHMTC-2021.2030
Experimental Investigation of Variable Tip Clearance in Square Pin Fin Microchannel Heat Sink
pages 1351-1356
DOI: 10.1615/IHMTC-2021.2040
Investigation of Fluid Flow and Heat transfer Characteristics of Synthetic Jet Impingement at different Strouhal Number
pages 1357-1362
DOI: 10.1615/IHMTC-2021.2050
An 800 node thermoregulation model for reference Indian subject
pages 1363-1369
DOI: 10.1615/IHMTC-2021.2060
Analysis of Human Thermal Response at Transient Conditions
pages 1371-1377
DOI: 10.1615/IHMTC-2021.2070
Flight Experiment of PCM coupled heat pipe onboard GSAT-29 spacecraft
pages 1379-1383
DOI: 10.1615/IHMTC-2021.2080
Thermodynamics Analysis of an Atmospheric Water Harvesting System
pages 1385-1390
DOI: 10.1615/IHMTC-2021.2090
Thermo-structural Design of an AA2014 mounting between a Structure and Liquid Oxygen Propellant Tank of a Launch Vehicle
pages 1391-1396
DOI: 10.1615/IHMTC-2021.2100
EXPERIMENTAL STUDIES ON THERMAL PERFORMANCE EVALUATION OF HYBRID SOLAR COOKER USING PHASE CHANGE MATERIALS AND PV TECHNOLOGY
pages 1397-1402
DOI: 10.1615/IHMTC-2021.2110
Coupled Effect of Variable Wettability and Body Force on Fluid Flow through Nanochannels: A Multiscale Approach
pages 1403-1409
DOI: 10.1615/IHMTC-2021.2120
Thermal performance of PCM based heat sink with solid and hollow fins for thermal management of electronics
pages 1411-1416
DOI: 10.1615/IHMTC-2021.2130
DECODING THE ALTERATION OF THERMAL CONDUCTIVITY OF NANOFLUIDS FROM MOLECULAR PERSPECTIVE
pages 1417-1422
DOI: 10.1615/IHMTC-2021.2140
Two-fluid magnetohydrodynamic channel flows - Induction Approximation
pages 1423-1428
DOI: 10.1615/IHMTC-2021.2150
Swift Optimization of Serial Radiators for Space Applications using an Approximation Technique
pages 1429-1435
DOI: 10.1615/IHMTC-2021.2160
Cavitation Performance of a Cryogenic Upper Stage Liquid Rocket Engine Pump Operating in Liquid Hydrogen
pages 1437-1442
DOI: 10.1615/IHMTC-2021.2170
Enhancement of quenching heat transfer using extended surfaces.
pages 1443-1449
DOI: 10.1615/IHMTC-2021.2180
Analysis of Thermal Response of Commonly used Envelope Designs for Energy Efficient Buildings in Composite Climate of India
pages 1451-1457
DOI: 10.1615/IHMTC-2021.2190
Supersonic plume interactions with transonic and hypersonic freestreams, and their impact on convective surface heating
pages 1459-1463
DOI: 10.1615/IHMTC-2021.2200
Computational Investigation of Nickel and Chromium Based Super Alloys as Gas Turbine Blade Materials
pages 1465-1470
DOI: 10.1615/IHMTC-2021.2210
Experimental analysis of direct contact condensation during vertical injection of steam on subcooled water pool
pages 1471-1477
DOI: 10.1615/IHMTC-2021.2220
Film flow and air entrainment around partially submerged rotating roller with a steady flow of air: A numerical approach
pages 1479-1483
DOI: 10.1615/IHMTC-2021.2230
Parametric Investigation of the Below-cloud Scavenging of Atmospheric Aerosols by Raindrops
pages 1485-1491
DOI: 10.1615/IHMTC-2021.2240
Numerical Study of Thermal Characteristics of Micro Heat Pipe: Role of Various Operating Parameters on Maximum Heat Transport Capability
pages 1493-1499
DOI: 10.1615/IHMTC-2021.2250
Computations of Heat Conduction in Two-Dimensional (2D) Domains Using a High-Accuracy Radial Basis Function Based Meshless Method
pages 1501-1506
DOI: 10.1615/IHMTC-2021.2260
Numerical studies on the effects of geometrical and operational conditions on the chugging phenomenon
pages 1507-1512
DOI: 10.1615/IHMTC-2021.2270
Simulation of Sodium Aerosol Behaviour in Cover Gas Space Using Multiphase Model
pages 1513-1518
DOI: 10.1615/IHMTC-2021.2280
Numerical Investigation of a Phase Change Material Enhanced Li-ion Battery Pack using the Dual Potential Multi-Scale Multi-Dimensional (MSMD) Approach
pages 1519-1525
DOI: 10.1615/IHMTC-2021.2290
A NUMERICAL ANALYSIS on the INFLUENCE of VARIOUS WORKING FLUIDS over the THERMAL PERFORMANCE of the VORTEX TUBE
pages 1527-1533
DOI: 10.1615/IHMTC-2021.2300
Effect of ignition temperature at air-inlet and radiation on temporal soot growth of turbulent diffusion flame
pages 1535-1541
DOI: 10.1615/IHMTC-2021.2310
Optimization of Hydrodynamic Performance of a Venturi Scrubber through Numerical Analysis
pages 1543-1549
DOI: 10.1615/IHMTC-2021.2320
Electrical Power output enhancement of Photovoltaic cells using ferrofluid based cooling
pages 1551-1556
DOI: 10.1615/IHMTC-2021.2330
Effect of Oblique Porous Plugs on the Pressure Drop and Heat Transfer in the Partially Porous Channel
pages 1557-1563
DOI: 10.1615/IHMTC-2021.2340
CFD Investigation of Wall Failure Mechanism in EAGLE ID1 Test for Reactor Safety Evaluation
pages 1565-1569
DOI: 10.1615/IHMTC-2021.2350
Numerical Analysis of Nano-Fluid Based Wavy Wall Microchannel Heat Sink for Electronic Cooling Applications
pages 1571-1576
DOI: 10.1615/IHMTC-2021.2360
Numerical Studies of Shock-Wave/Boundary-Layer Interaction over Blunted Cone/Flare at Hypervelocity Speed
pages 1577-1582
DOI: 10.1615/IHMTC-2021.2370
Observation of Pressure Oscillations During Performance Testing of a Rocket Engine Fuel Pump
pages 1583-1588
DOI: 10.1615/IHMTC-2021.2380
Bubble flow characteristics in subcooled flow boiling in microchannel heat sinks
pages 1589-1594
DOI: 10.1615/IHMTC-2021.2390
Heat Transfer Augmentation in Micro Pin Fin Heat Sink Using Out of Plane Fluid Mixing
pages 1595-1600
DOI: 10.1615/IHMTC-2021.2400
Assessment of Shutdown Systems' performance during postulated Large Break LOCA for 700MWe Pressurized Heavy Water Reactors
pages 1601-1606
DOI: 10.1615/IHMTC-2021.2410
MyCoil − A program for the rating and optimisation of flow paths of air-cooled heat exchangers
pages 1607-1611
DOI: 10.1615/IHMTC-2021.2420
Numerical Studies on Hydrogen Distribution Patterns in Nuclear Reactor Containment
pages 1613-1617
DOI: 10.1615/IHMTC-2021.2430
Effects of Thermal boundary conditions in a Porous enclosure with Gambrel roofing-A numerical study
pages 1619-1624
DOI: 10.1615/IHMTC-2021.2440
Heat Source Conditions and PCM Chamber Orientation Effect on the Performance of a Latent Heat Thermal Energy Storage System
pages 1625-1630
DOI: 10.1615/IHMTC-2021.2450
Effect of Electromagnetic Stirring on Solidification of A356 Alloy
pages 1631-1636
DOI: 10.1615/IHMTC-2021.2460
Variation in CFD Parameters for Afterburners with Standard V-Gutter and Modified V-Gutter
pages 1637-1642
DOI: 10.1615/IHMTC-2021.2470
Numerical study of Heat Transfer Characteristics of an Impinging Synthetic Jet
pages 1643-1649
DOI: 10.1615/IHMTC-2021.2480
Simultaneous Mapping of Temperature and Velocity Fields Using Thermographic PIV
pages 1659-1664
DOI: 10.1615/IHMTC-2021.2500
NUMERICAL STUDY OF HYDRODYNAMICS AND HEAT TRANSFER CHARACTERISTICS DURING COOLING OF CURVE SURFACE WITH WATER JET IMPINGEMENT
pages 1665-1670
DOI: 10.1615/IHMTC-2021.2510
Heat transfer analysis of air-cooled nuclear fuel storage vault
pages 1671-1676
DOI: 10.1615/IHMTC-2021.2520
Investigation of the flow field at the exit of an annular unconfined swirl burner at cold flow conditions using particle image velocimetry
pages 1677-1682
DOI: 10.1615/IHMTC-2021.2530
Effect of inclination on the stability map of Coupled Natural Circulation Loop Systems
pages 1683-1689
DOI: 10.1615/IHMTC-2021.2540
Recent Advancements in A Film-Wise Condensation Over Outside of Single Horizontal Tubes
pages 1691-1698
DOI: 10.1615/IHMTC-2021.2550
An Efficient Computational Model for Solidification of Water in Large Tanks
pages 1699-1704
DOI: 10.1615/IHMTC-2021.2560
Experimental and Numerical investigation of direct contact condensation of steam jet in stagnant subcooled water
pages 1705-1711
DOI: 10.1615/IHMTC-2021.2570
Numerical Investigation on the Lewis Number Effects on the Turbulent Premixed Swirl Stabilized Propane-Air Flames
pages 1713-1719
DOI: 10.1615/IHMTC-2021.2580
INVESTIGATIONS ON THE INFLUENCE OF CHANNEL'S SPAN WISE ASPECT RATIO OVER THE HEAT TRANSFER CHARACTERISTICS OF AN UPWARD SOLAR AIR HEATER
pages 1721-1726
DOI: 10.1615/IHMTC-2021.2590
Numerical Study On Catalyst Assisted Combustion Of Premixed Oxy-Methane Mixtures in Platinum reactor
pages 1727-1732
DOI: 10.1615/IHMTC-2021.2600
Comparative Analysis of Different Active and Passive Cooling Methodologies for High-Power LEDs
pages 1733-1738
DOI: 10.1615/IHMTC-2021.2610
Prediction of thermal contact conductance in conforming rough metal contacts through regeneration of surface profile
pages 1739-1744
DOI: 10.1615/IHMTC-2021.2620
Heat and Mass Transport in a Metal Hydride based Hydrogen Storage Reactor with Hexagonal Heat Transfer Enhancements
pages 1745-1750
DOI: 10.1615/IHMTC-2021.2630
Heat transfer enhancement using jet impingement with attachments on the target surface
pages 1751-1757
DOI: 10.1615/IHMTC-2021.2640
Computational study on the effect of gas nozzle expansion configurations on the gas flow field for supersonic gas-atomization process
pages 1759-1765
DOI: 10.1615/IHMTC-2021.2650
Droplet impact and spreading around the thin solid vertical cylinder: A numerical approach
pages 1773-1778
DOI: 10.1615/IHMTC-2021.2670
Experimental Analysis of Subcooled Flow Boiling at Subatmospheric Pressure
pages 1779-1784
DOI: 10.1615/IHMTC-2021.2680
Assessment of parallelization techniques for an Eulerian-Lagrangian multiphase flow algorithm
pages 1785-1790
DOI: 10.1615/IHMTC-2021.2690
NUMERICAL INVESTIGATION ON THERMAL BEHAVIOUR OF LITHIUM-ION CELL IN DIFFERENT FLUID MATERIALS
pages 1791-1796
DOI: 10.1615/IHMTC-2021.2700
Numerical analysis of Gyroid structure based cross-flow heat exchanger
pages 1797-1802
DOI: 10.1615/IHMTC-2021.2710
Numerical Investigation of Conjugate Heat Transfer and Thermal Stresses of Additively Manufactured Tubes in Turbulent Flow regime
pages 1803-1808
DOI: 10.1615/IHMTC-2021.2720
Numerical Investigation on Hydrodynamics of Non-parallel Hydrophobic Microchannel
pages 1809-1813
DOI: 10.1615/IHMTC-2021.2730
Numerical analysis of photovoltaic panel integrated with PCM and water container
pages 1815-1821
DOI: 10.1615/IHMTC-2021.2740
Single phase CFD Modelling to Numerically Evaluate Performance of Compact Plate Heat Exchanger using Al2O3-distilled water Nanofluid for Cooling Applications.
pages 1823-1828
DOI: 10.1615/IHMTC-2021.2750
Effect of fin location on constrained melting heat transfer of phase change material in a spherical capsule: A numerical study
pages 1829-1834
DOI: 10.1615/IHMTC-2021.2760
HEAT TRANSFER ENHANCEMENT OF AN IMPINGING SYNTHETIC AIR JET USING SHARP-EDGED ORIFICE
pages 1835-1840
DOI: 10.1615/IHMTC-2021.2770
Measurement of laminar burning velocity of premixed mixtures of ethane/propane reacting in air and oxygen enriched air using freely expanding spherical flames
pages 1841-1846
DOI: 10.1615/IHMTC-2021.2780
Experimental setup to measure thermal diffusivity of solid rod sample using Ångström method at different temperatures
pages 1847-1751
DOI: 10.1615/IHMTC-2021.2790
THERMAL DESIGN AND ANALYSIS OF CONICAL SCANNING EARTH SENSOR FOR POLAR SUN SYNCHRONOUS SATELLITE
pages 1853-1857
DOI: 10.1615/IHMTC-2021.2800
Machine Learning Technique to assist Computational Fluid Dynamics
pages 1859-1865
DOI: 10.1615/IHMTC-2021.2810
Experimental and Numerical Investigation of a Piezoelectric Air-Mover System for Electronics Cooling
pages 1867-1873
DOI: 10.1615/IHMTC-2021.2820
Investigating Pin Fin Configurations on Automotive Exhaust Heat Exchanger Surface for Thermoelectric Generation
pages 1875-1880
DOI: 10.1615/IHMTC-2021.2830
Understanding of gas-liquid interfacial dynamics caused by horizontal rotary roller: A numerical approach
pages 1881-1886
DOI: 10.1615/IHMTC-2021.2840
Comparative Study on the Suitability of Liquid Rocket Propellants for use in Electric Pump Fed Rocket Upper Stages
pages 1887-1892
DOI: 10.1615/IHMTC-2021.2850
Development of Two-phase Electrohydrodynamic Flow Solver on Unstructured Grid
pages 1893-1897
DOI: 10.1615/IHMTC-2021.2860
Experimental analysis on performance of solar air heater combined with staggered element in inclined rib using liquid crystal thermography technique
pages 1899-1906
DOI: 10.1615/IHMTC-2021.2870
Thermal Performance of Different Types of CuO hybrid nanofluids for a plate type heat exchanger
pages 1907-1912
DOI: 10.1615/IHMTC-2021.2880
Reduction of Thermal Loading on Inner Vessel of a Future FBR Design
pages 1913-1918
DOI: 10.1615/IHMTC-2021.2890
A fractional time stepping template for geometric fluid advection in Volume of Fluid method
pages 1919-1924
DOI: 10.1615/IHMTC-2021.2900
The competing effects of high zeta potential and finite ionic size on the thermal behaviour of pseudoplastic flows through confined spaces with hydrophobic surfaces
pages 1925-1930
DOI: 10.1615/IHMTC-2021.2910
OPTIMIZATION OF THERMOELECTRIC MODULE ASSISTED SELF-HEAT RECUPERATORS
pages 1931-1937
DOI: 10.1615/IHMTC-2021.2920
Heat Transfer Analysis of Finned Tube Heat Exchanger with Non-Newtonian fluid and Longitudinal Vortex Generator
pages 1939-1944
DOI: 10.1615/IHMTC-2021.2930
NUMERICAL INVESTIGATION OF FREE CONVECTION HEAT TRANSFER IN POROUS MEDIA
pages 1945-1950
DOI: 10.1615/IHMTC-2021.2940
Experimental Analysis of Local Nusselt Number Distribution over a Flat Plate Impinged by Jet of Air through a Circular Nozzle over a Larger Radial Distance
pages 1951-1956
DOI: 10.1615/IHMTC-2021.2950
Experimental Heat Transfer and Friction factor study with Correlation development for a Rectangular duct having Staggered Racetrack-shaped perforated V-up baffle blocks
pages 1957-1964
DOI: 10.1615/IHMTC-2021.2960
Characterization of Sintered Porous Wick for use in Loop Heat Pipe
pages 1965-1969
DOI: 10.1615/IHMTC-2021.2970
Effect of sidewall on heat transfer characteristics of a three-dimensional wall jet
pages 1971-1975
DOI: 10.1615/IHMTC-2021.2980
Comparative analysis of cryoablation in nano-phantom and normal-phantom with multihole nozzle
pages 1977-1981
DOI: 10.1615/IHMTC-2021.2990
Heat transfer enhancement by using turbulent wall jet with a partial wavy wall
pages 1983-1987
DOI: 10.1615/IHMTC-2021.3000
Three-dimensional heat transfer and fluid flow analysis of Double forward-facing stepped channel with obstacles
pages 1989-1994
DOI: 10.1615/IHMTC-2021.3010
On the accuracy of RANS turbulence models to predict the influence of free-stream hot gas turbulent Intensity on flat plate film cooling
pages 1995-2001
DOI: 10.1615/IHMTC-2021.3020
Numerical Study on the Effect of Multiple Injectors on Thrust Vectoring Performance of Convergent-Divergent Nozzle
pages 2003-2009
DOI: 10.1615/IHMTC-2021.3030
Influence of magnetic field on THF hydrate formation in the presence of Fe3O4 nanoparticles
pages 2011-2015
DOI: 10.1615/IHMTC-2021.3040
Methodology for Estimation of Source Term Release from Fuel during Severe Accidents in Pressurised Heavy Water Reactors
pages 2017-2021
DOI: 10.1615/IHMTC-2021.3050
Effect of different non-uniform heat flux profiles on thermo-hydraulic characteristics of thermosyphon
pages 2023-2029
DOI: 10.1615/IHMTC-2021.3060
Influence of transient heat input on pool boiling behaviour
pages 2031-2037
DOI: 10.1615/IHMTC-2021.3070
An analytical approach for predicting the effective thermal conductivity of coated metal foams infiltrated with phase change materials
pages 2039-2044
DOI: 10.1615/IHMTC-2021.3080
Estimation of flux in a disc brake system using accelerated Bayesian inference
pages 2045-2051
DOI: 10.1615/IHMTC-2021.3090
Thermodynamic response of a larger, multi-species ullage of a cryogenic propellant tank during pressurization and slosh excitations
pages 2053-2059
DOI: 10.1615/IHMTC-2021.3100
Computational prediction of pressure drop during incompressible flow across porous screens
pages 2061-2066
DOI: 10.1615/IHMTC-2021.3110
Performance analysis of a compact liquid desiccant cooling system
pages 2067-2072
DOI: 10.1615/IHMTC-2021.3120
Characteristics of laminar-turbulent bands in plane Couette flow
pages 2073-2077
DOI: 10.1615/IHMTC-2021.3130
Effect of fillet on fluid flow and heat transfer characteristics in a grooved channel: A Numerical study
pages 2079-2084
DOI: 10.1615/IHMTC-2021.3140
Effective Thermal Conductivity of Hollow Strut-based Periodic Cellular Solids
pages 2091-2096
DOI: 10.1615/IHMTC-2021.3160
Impact of pulsating heating on the system dynamics of a Natural Circulation System
pages 2097-2103
DOI: 10.1615/IHMTC-2021.3170
Numerical study of molten metal flow through the melt delivery tube during gas-atomization
pages 2105-2110
DOI: 10.1615/IHMTC-2021.3180
Experimental study of gasification of wet biomass in a packed bed downdraft configuration
pages 2111-2116
DOI: 10.1615/IHMTC-2021.3190
A study on data processing techniques of expanding spherical flames at constant pressure conditions.
pages 2117-2123
DOI: 10.1615/IHMTC-2021.3200
On the Critical Heat Flow Features of Submerged, Low Reynolds Number Jets Impinging on a Protruded Heat Source
pages 2125-2130
DOI: 10.1615/IHMTC-2021.3210
Conjugate Natural Convection with Surface Radiation from a Vertical Hollow Cylinder with a Finite Wall Thickness
pages 2131-2136
DOI: 10.1615/IHMTC-2021.3220
The Effects of Snowflake-Shaped Fin Configurations on PCM Solidification
pages 2137-2143
DOI: 10.1615/IHMTC-2021.3230
A comparative experimental study of thermo-hydraulic performance with vortex flow generator and twisted tape insert
pages 2145-2150
DOI: 10.1615/IHMTC-2021.3240
Effect of suction/blowing on the heat transfer and fluid flow characteristics past rectangular cylinder with fillet at low Reynolds number
pages 2151-2156
DOI: 10.1615/IHMTC-2021.3250
Thermal Performance Comparisons of ECT and Helical-Coiled based Metal-Hydride Reactor
pages 2157-2162
DOI: 10.1615/IHMTC-2021.3260
Effect of Cross Flow on the Heat Transfer Characteristics of Steady Jets
pages 2163-2168
DOI: 10.1615/IHMTC-2021.3270
Energy and Exergy Analysis of Natural Refrigerant Pair in a Cascade System for Combined Cooling and Heating Application
pages 2169-2175
DOI: 10.1615/IHMTC-2021.3280
Thermal Study on Trimethyl Aluminium Canister Payload in Sounding Rocket
pages 2177-2181
DOI: 10.1615/IHMTC-2021.3290
Pore scale Simulation of Hydrogen Absorption of Metal Hydride Storage Bed
pages 2183-2189
DOI: 10.1615/IHMTC-2021.3300
Sonic Jet Injection into a Supersonic Turbulent Crossflow
pages 2191-2196
DOI: 10.1615/IHMTC-2021.3310
A STUDY ON TWO-PHASE PRESSURE DROP IN ONCE THROUGH STEAM GENERATOR USED IN SFR
pages 2197-2202
DOI: 10.1615/IHMTC-2021.3320
Thermalhydraulic Assessment of Supercritical CO2 filled Double-cooled Annular Channel
pages 2203-2208
DOI: 10.1615/IHMTC-2021.3330
Effect of variable set point temperature of the cabin on thermal performance of ground heat exchanger in winter season
pages 2209-2215
DOI: 10.1615/IHMTC-2021.3340
Analysis of Hypersonic Rarefied Reactive Flow Over RAM-C II Forebody Using hy2Foam Solver
pages 2217-2223
DOI: 10.1615/IHMTC-2021.3350
Computational analysis of thermal comfort, CO2 and particle trajectory in an office room model with two different air-conditioning system
pages 2225-2230
DOI: 10.1615/IHMTC-2021.3360
HEAT FLUX OPTIMIZATION FOR HEAT SOURCES ON CONDUCTIVE SUBSTRATE FOR HEAT TRANSFER ENHANCEMENT
pages 2231-2235
DOI: 10.1615/IHMTC-2021.3370
An Analytical and Experimental Investigation on Natural Convection in a Mini-channel Cylindrical Heat Sink for COB LED Application
pages 2237-2242
DOI: 10.1615/IHMTC-2021.3380
Heat and Mass Transfer in a Localized Heated Porous Cavity to Casson Fluid
pages 2243-2249
DOI: 10.1615/IHMTC-2021.3390
An Inverse Estimation of Thermal Contact Conductance of Aero-Space Structural Adhesive Interface Between Diffuser Plate and Honeycomb Sandwich Panel
pages 2251-2256
DOI: 10.1615/IHMTC-2021.3400
Parametric study of natural convection flow under the non-Boussinesq condition in a vertical channel with conducting side-walls
pages 2257-2264
DOI: 10.1615/IHMTC-2021.3410
Flame Acceleration Simulations in Gas Explosions based on Porosity/Distributed Resistance Modelling
pages 2271-2276
DOI: 10.1615/IHMTC-2021.3430
Generation of Design Data for Offset Fins in Compact Heat Exchangers for Aerospace Applications
pages 2277-2283
DOI: 10.1615/IHMTC-2021.3440
Numerical Investigation on the Structural Behaviour of Reinforced Concrete Beam exposed to Elevated Temperatures
pages 2285-2291
DOI: 10.1615/IHMTC-2021.3450
NUMERICAL INVESTIGATIONS OF MODIFIED TESLA STRUCTURES WITH APPLICATION TO MIXING
pages 2293-2298
DOI: 10.1615/IHMTC-2021.3460
Magnetohydrodynamic Convection in a Grooved Channel Embedded with a Conducting Cylinder
pages 2299-2305
DOI: 10.1615/IHMTC-2021.3470
Effect of temperature on bubbling fluidized bed hydrodynamics with swirling air distributor
pages 2307-2312
DOI: 10.1615/IHMTC-2021.3480
Effect of internal rib geometry on film cooling performance
pages 2313-2318
DOI: 10.1615/IHMTC-2021.3490
INVESTIGATIONS ON TOTAL INSTANTANEOUS BLOCKAGE IN A FUEL SUBASSEMBLY OF FAST REACTOR USING COUPLED THERMAL HYDRAULIC REACTOR PHYSICS MODEL
pages 2319-2324
DOI: 10.1615/IHMTC-2021.3500
Performance Analysis of 3D Printed Stack for Standing Wave Thermoacoustic Refrigerator
pages 2325-2330
DOI: 10.1615/IHMTC-2021.3510
Investigation on the effects of pressure and Hydrogen addition on laminar burning velocity and flame stability of n-Dodecane-Hydrogen-air mixtures
pages 2331-2336
DOI: 10.1615/IHMTC-2021.3520
Wake dynamics of turbulent flow over a normal flat plate: a DNS study
pages 2337-2342
DOI: 10.1615/IHMTC-2021.3530
Modelling Fast Hydrogen Deflagration in Partially Obstructed Acceleration Tube of ENACCEF and the Model Constant of Eddy Dissipation Model
pages 2343-2348
DOI: 10.1615/IHMTC-2021.3540
Generation of design data for wavy fins used in compact heat exchangers for aerospace applications
pages 2349-2355
DOI: 10.1615/IHMTC-2021.3550
Integrated steady and transient pool thermal hydraulic analysis of primary sodium circuit
pages 2357-2362
DOI: 10.1615/IHMTC-2021.3560
Modelling and Numerical Simulation of Nano-enhanced Finned PV-PCM System
pages 2363-2370
DOI: 10.1615/IHMTC-2021.3570
Numerical Analysis of Critical Factors Affecting the Efficacy of MA on Lungs
pages 2371-2376
DOI: 10.1615/IHMTC-2021.3580
Forced convection heat transfer from a semi-circular permeable cylinder to air
pages 2377-2382
DOI: 10.1615/IHMTC-2021.3590
Effect of thermocouple for sodium leak detection for an annular plenum in heat exchanger
pages 2383-2388
DOI: 10.1615/IHMTC-2021.3600
Numerical Simulation of Sodium Spreading under Pool Fire Scenario in SFR Cells Using the Viscous Gravity Current Model
pages 2389-2394
DOI: 10.1615/IHMTC-2021.3610
A parametric study of water draining from a rectangular tank using multiple outlets
pages 2395-2400
DOI: 10.1615/IHMTC-2021.3620
Stability of charged and uncharged pendant droplets at the tip of different size needles
pages 2401-2406
DOI: 10.1615/IHMTC-2021.3630
Hydrogen Leakage in a Confined Warehouse: Distribution Pattern and Identification of Explosion Locations
pages 2407-2412
DOI: 10.1615/IHMTC-2021.3640
Numerical Simulation of Hydrogen Transport in Metal Hydride Based Coupled Beds
pages 2413-2419
DOI: 10.1615/IHMTC-2021.3650
Concentrating Solar Powered Transcritical CO2 Power Generation Cycle for the Union Territory of Ladakh, India
pages 2421-2426
DOI: 10.1615/IHMTC-2021.3660
Numerical investigation on melting and heat transfer characteristics of phase change material in a parallelogram enclosure
pages 2427-2434
DOI: 10.1615/IHMTC-2021.3670
Study of Flow and Heat Transfer Properties for a 2D Geometry of Linear Gas Turbine Blade Cascade at Transonic Flow Condition
pages 2435-2441
DOI: 10.1615/IHMTC-2021.3680
Numerical Analysis of the Characteristics of Diesel Pool Fire in a Vented Compartment
pages 2443-2449
DOI: 10.1615/IHMTC-2021.3690
Effect of roof insulation and cool paints on thermal comfort of a naturally ventilated building located in a hot and humid climate
pages 2451-2456
DOI: 10.1615/IHMTC-2021.3700
Cooling Characteristics of Air Jet Impinging on a Rotating Circular Disk
pages 2457-2463
DOI: 10.1615/IHMTC-2021.3710
A Modular Thermal Design for Battery in Small satellites
pages 2465-2468
DOI: 10.1615/IHMTC-2021.3720
EFFECT OF ELLIPTICAL NOZZLE GEOMETRY ON THE HEAT TRANSFER CHARACTERISTICS OF A CURVED SURFACE
pages 2469-2474
DOI: 10.1615/IHMTC-2021.3730
Numerical Analysis of Carboxyl Graphene Nano-coolant in Automobile Radiator
pages 2475-2480
DOI: 10.1615/IHMTC-2021.3740
Heat transfer enhancement using rectangular-winglet-type vortex- generators on the annular fins
pages 2481-2487
DOI: 10.1615/IHMTC-2021.3750
CFD Simulations of a PCM coupled heat pipe with thermal enhancers
pages 2489-2494
DOI: 10.1615/IHMTC-2021.3760
Sampling and Measurement of Tar in the Product Gas of the Downdraft Gasifier: A Case Study
pages 2501-2505
DOI: 10.1615/IHMTC-2021.3780
Computational investigation of the thermohydraulic performance of a flexible heat pipe for various bending angle, filling ratios and materials
pages 2507-2513
DOI: 10.1615/IHMTC-2021.3790
Thermo-hydraulics performance of isothermally heated tube composed of the flat and circular surface
pages 2515-2520
DOI: 10.1615/IHMTC-2021.3800
On performance evaluation index for optimization of metal hydride based hydrogen storage devices
pages 2521-2526
DOI: 10.1615/IHMTC-2021.3810
A comparative assessment of Ag/ZnO hybrid nanofluid with ZnO nanofluid to augment the heat transfer rate during pool boiling
pages 2527-2533
DOI: 10.1615/IHMTC-2021.3820
Experimental Investigation to Identify the Effect of Thin Metal Foam on Heat Transfer Characteristics of a Heated Plate
pages 2541-2546
DOI: 10.1615/IHMTC-2021.3840
Vapor Condensation of Iso-Butane over Plain Tube and 24 fpi finned tube placed horizontally
pages 2547-2550
DOI: 10.1615/IHMTC-2021.3850
PERFORMANCE ANALYSIS OF PHASE CHANGE MATERIAL TO REDUCE THERMAL LOSSES IN LITHIUM-ION BATTERIES
pages 2551-2555
DOI: 10.1615/IHMTC-2021.3860
Thermo-Hydraulic Modelling of Miniature Loop Heat Pipes
pages 2557-2562
DOI: 10.1615/IHMTC-2021.3870
Numerical Study on Heat Transfer through Modified Rectangular Fins using ANSYS Fluent
pages 2563-2569
DOI: 10.1615/IHMTC-2021.3880
PREDICTION OF LIMITING CONDITIONS FOR PASSIVE COOLING OF HEATED BLOCKS UNDER VERTICAL CHANNEL: A COMPUTATIONAL INVESTIGATION
pages 2571-2576
DOI: 10.1615/IHMTC-2021.3890
A Numerical Study of Transient Characteristics of Miniature Loop Heat Pipes
pages 2577-2583
DOI: 10.1615/IHMTC-2021.3900
Lattice Boltzmann Method based Computation of Tumor Size Dependent Thermal Damage during Plasmonic Photothermal Therapy
pages 2585-2591
DOI: 10.1615/IHMTC-2021.3910
Response of a Choked Microchannel to Large-Amplitude Downstream Pressure
pages 2593-2597
DOI: 10.1615/IHMTC-2021.3920
Design of an Experimental Rig for Assessment of Thermal Insulation
pages 2599-2604
DOI: 10.1615/IHMTC-2021.3930
Design and Simulation of a Compact Miniature Parallel Channel Heat Sink for Electronic Cooling
pages 2605-2611
DOI: 10.1615/IHMTC-2021.3940
Numerical Study on Performance Evaluation of Multi-Tubular Sodium Alanate Hydride Reactor by Enhancing Heat and Mass Transfer Characteristics Using Nanofluids
pages 2613-2618
DOI: 10.1615/IHMTC-2021.3950
Effect of Geometry in Conjugate Heat Transfer and Fluid Flow through Triangular Copper Miniature Channels
pages 2619-2624
DOI: 10.1615/IHMTC-2021.3960
Numerical investigation of turbulent heat transfer enhancement in partially corrugated tube using water based nanofluid
pages 2625-2631
DOI: 10.1615/IHMTC-2021.3970
Hybrid Power System: A Clean Renewable Energy Resource for the Development of Rural Areas in India
pages 2633-2638
DOI: 10.1615/IHMTC-2021.3980
Effect of initial surface temperature on rewetting of a hot circular tube during air-atomized spray cooling
pages 2639-2644
DOI: 10.1615/IHMTC-2021.3990
A numerical investigation of thermal behaviour of CEG/copper foam/paraffin based composite phase change material
pages 2645-2649
DOI: 10.1615/IHMTC-2021.4000
Wake dynamics from normal flat plates: effect of perforation orientation
pages 2651-2655
DOI: 10.1615/IHMTC-2021.4010
Performance Enhancement Investigations in a Solar Parabolic Trough Collector using Vortex Generators
pages 2657-2662
DOI: 10.1615/IHMTC-2021.4020
Airflow Study in Metal Foams: Direct Simulation and Experiment
pages 2663-2668
DOI: 10.1615/IHMTC-2021.4030
Prediction of Temperature Distribution in a Hypersonic Re-entry Capsule using DSMC Method
pages 2669-2675
DOI: 10.1615/IHMTC-2021.4040
Analysis of ligaments formed during sheet atomization of non-Newtonian fluids
pages 2683-2690
DOI: 10.1615/IHMTC-2021.4060
Droplet Spreading Post-Impact on Inclined Solid Surfaces
pages 2691-2695
DOI: 10.1615/IHMTC-2021.4070
Cookstove Testing: Effect of Suction Pressure of Emission Hood on the Cookstove - a Semi-Analytical Study
pages 2697-2702
DOI: 10.1615/IHMTC-2021.4080
Development of Dual-Wavelength Interferometry Technique for the simultaneous measurement of Concentration and Temperature
pages 2703-2708
DOI: 10.1615/IHMTC-2021.4090
Numerical simulations and analysis of flow past vertical-axis wind turbines employing the actuator line method
pages 2715-2720
DOI: 10.1615/IHMTC-2021.4110
Towards understanding air curtain flows using RANS based numerical simulations
pages 2721-2726
DOI: 10.1615/IHMTC-2021.4120
Performance of passive radiant cooler of IMAGER payload through seven year designed mission life of a meteorological spacecraft
pages 2727-2732
DOI: 10.1615/IHMTC-2021.4130
Experimental Evaluation and Characterisation of PID Controller For Spacecraft Thermal Testing
pages 2733-2736
DOI: 10.1615/IHMTC-2021.4140
Impingement Heat Transfer Enhancement by Synthetic Jet Array
pages 2737-2743
DOI: 10.1615/IHMTC-2021.4150
Influence of Electrodes Orientation on Processing Capacity of Joule Heated Ceramic Melter
pages 2745-2750
DOI: 10.1615/IHMTC-2021.4160
Stability of Rayleigh-Benard Convection in Trapezoidal Cavities
pages 2751-2756
DOI: 10.1615/IHMTC-2021.4170
Influence of Spatter Size on Spatter Transport in an Additive Manufacturing Build Chamber
pages 2757-2762
DOI: 10.1615/IHMTC-2021.4180
Influence of Internal Circulation on Absorption of Atmospheric CO2 and SO2 in Rain Drop
pages 2763-2768
DOI: 10.1615/IHMTC-2021.4190
Performance of Sharp-versus-Diffuse Interface-based Level Set Method on a Staggered-versus-Co-located grid
pages 2769-2774
DOI: 10.1615/IHMTC-2021.4200
Assessment of Exergy Loss Rate in Marine Boiler to Analyze the Performance of Waste Heat Plant by the Exergy Method
pages 2775-2780
DOI: 10.1615/IHMTC-2021.4210
Comparison of Various RANS Models for Predicting Near-wall Flow and Heat Transfer Characteristics of a Turbulent Wall Jet
pages 2781-2787
DOI: 10.1615/IHMTC-2021.4220
On the tracking of freezing front during cryosurgery: Simulations and experiments with tissue-mimicking medium
pages 2789-2794
DOI: 10.1615/IHMTC-2021.4230
Mathematical Model of Rapid Depressurization of a High-Pressure Gas Bottle and Estimation of Residual Gas
pages 2795-2800
DOI: 10.1615/IHMTC-2021.4240
Experimental study of local boiling heat transfer coefficient in the uniformly spaced transverse grooved horizontal tube with R-123
pages 2801-2806
DOI: 10.1615/IHMTC-2021.4250