Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India - 2024, .

Proceedings of the 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference December 14-17, 2023, IIT Patna, Patna-801106, Bihar, India

December, 14-17, 2023, Bihar, India

Sumário:

Optimization Of Critical Opening In Between Different Compartment of Containment For Future 700 MWe IPHWRS Sanjeev Kumar Sharma, Ankush Yadav, Manoj Kansal, Sameer Hajela, D. K. Chandraker, N. K. Maheshwari pages 1-6 DOI: 10.1615/IHMTC-2023.10

Experimental and Numerical Investigations on Nucleate Pool Boiling Over Flat Surface Atul Kumar Ahirwal, Krishna Kumar Yadav, Ashwini Kumar Yadav, Tej Pratap pages 7-12 DOI: 10.1615/IHMTC-2023.20

Numerical Investigations into the Effect of Pitch of Butterfly Inserts on Heat Transfer Enhancement in a Minichannel Heat Sink Rahul Pandey, Umesh Madanan pages 13-18 DOI: 10.1615/IHMTC-2023.30

Heat transfer augmentation by nano-fluids in a circular pipe Sameer Ranjan Sahu, Hrushikesh Barik, Pandaba Patro pages 19-24 DOI: 10.1615/IHMTC-2023.40

Transport Phenomena in Differentially-side-heated Lid-driven-cavity with Shear-thinning Fluid Md Imtiaz Alam, Himadri Chattopadhyay pages 25-30 DOI: 10.1615/IHMTC-2023.50

Experimental Study on Double Pass Reverse Flow Solar Air Heater with Delta Wings and Perforation on Absorber Plate Sohan Lal Sharma, Ajoy Debbarma pages 31-36 DOI: 10.1615/IHMTC-2023.60

Global stability analysis of the boundary layer with non-uniform wall suction and injection Mayank Thummar, Ramesh Bhoraniya, Vinod Narayanan pages 37-42 DOI: 10.1615/IHMTC-2023.70

Experimental Investigation of Evaporation Rates from a TiO₂ Nanocoated Surface Rinku Kumar Gouda, Mohammad Autif Shahdhaar, Atul Srivastava pages 43-48 DOI: 10.1615/IHMTC-2023.80

Electro-Magneto-Hydrodynamics (EMHD) of a less conducting confined drop than the surrounding pool Pulak Gupta, Purbarun Dhar, Devranjan Samanta pages 49-54 DOI: 10.1615/IHMTC-2023.90

Application of 4D Thermal Imaging to the Emissivity Measurement of Uneven Surfaces Haotian Huang, Yuan Zhu pages 55-60 DOI: 10.1615/IHMTC-2023.100

Experimental study of double layer microchannel heat sink with distinct channel configurations Anurag Maheswari, Yogesh K. Prajapati, Kuldip Kumar, Dinesh Kumar, Prabhakar Bhandari pages 61-66 DOI: 10.1615/IHMTC-2023.110

Selection of coal using MCDM techniques on the thermodynamic parameters Monali Suryabhanji Bhojane, Sudhir Chandra Murmu, Himadri Chattopadhyay, Abhijit Dutta pages 67-72 DOI: 10.1615/IHMTC-2023.120

Investigation of SiO₂ − Water Nanofluid Jet Impingement using Eulerian Multiphase Model Ketan Atulkumar Ganatra, Achintya Mukhopadhyay pages 73-78 DOI: 10.1615/IHMTC-2023.130

Assessing Performance and Economics of Vapor Compression Refrigeration system with Low GWP Refrigerants: A Multi-Objective Optimization Approach Prakash Chandra Singh, Pabitra Halder pages 79-84 DOI: 10.1615/IHMTC-2023.140

Assessment of Different ORC Configurations for Recovery of Flue Gas from Glass Industry Summaiya Javed, Arun Kumar Tiwari pages 85-90 DOI: 10.1615/IHMTC-2023.150

Performance Assessment of Alkaline Water Electrolysis for Hydrogen Production Vijay Kumar, Arun Kumar Tiwari pages 91-95 DOI: 10.1615/IHMTC-2023.160

Fluid-Structure Interaction: Flow-Induced Vibration and Heat Transfer in Three Staggered Cylinders Sanjeev Kumar, MD Islam pages 97-102 DOI: 10.1615/IHMTC-2023.170

ASPEN PLUS simulation of NH₃/H₂O and NH₃/LiNO₃ vapour absorption refrigeration systems Sathyabhama A, Pranali Waghare, Ramakrishna N. Hegde pages 103-108 DOI: 10.1615/IHMTC-2023.180

Investigation of Material Flow to Predict Defect Formation in Friction Stir Welding Debtanay Das, Swarup Bag, Sukhomay Pal pages 109-114 DOI: 10.1615/IHMTC-2023.190

Visualization study of Bubble iterations at Downward-Facing Boiling P. K. Verma, A. K. Nayak pages 115-120 DOI: 10.1615/IHMTC-2023.200

The shape of the liquid-vapor interface during film boiling in the presence of surface extends Venugopal Venkitesh, Susmita Dash pages 121-127 DOI: 10.1615/IHMTC-2023.210

Bouncing Dynamics of a Binary Solution Droplet in the Leidenfrost State Pranjal Agrawal, Susmita Dash pages 129-135 DOI: 10.1615/IHMTC-2023.220

Influence of Local Thermal Non-Equilibrium on Forced Convection Heat Transfer in a Duct Packed with Porous Medium: Iso-thermal Walls Nitish gupta, D. Bhargavi pages 137-143 DOI: 10.1615/IHMTC-2023.230

Effect of pipe and orifice on local heat transfer distribution on thin metal foil impinged by free surface water jet A. Kumar, Jay Patel, Santosh V. Prabhu pages 145-148 DOI: 10.1615/IHMTC-2023.240

Computer Simulations on Heat Transfer Enhancement in a Minichannel Heat Sink using Modified Butterfly Inserts Aritri Halder, Rahul Pandey, Umesh Madanan pages 149-154 DOI: 10.1615/IHMTC-2023.250

Numerical Investigation of the Influence of the Bell-Shaped Primary Nozzle on Ejector Performance Gokhul K, Dr. Soma Sundaram S pages 155-160 DOI: 10.1615/IHMTC-2023.260

Evaluation of the cooling effect due to the presence of major blood vessel on the magnetic hyperthermia therapy Amritpal Singh, Neeraj Kumar pages 161-166 DOI: 10.1615/IHMTC-2023.270

Numerical Study of Fluid-Structure Interaction for Blood Flow in Human Viscoelastic Artery Tarak Nath Mal, Bharat Soni, Ameeya Kumar Nayak pages 167-171 DOI: 10.1615/IHMTC-2023.280

Thermal Characteristics of Nano-fluid-Based Wickless Heat Pipe for Electronic Thermal Management Jobin Jose, Tapano Kumar Hotta pages 173-178 DOI: 10.1615/IHMTC-2023.290

On temperature characteristics of a cover plate placed over a boiling water container Sunil Rout, Ranjit Kumar Sahoo, Kaustav Chaudhury pages 179-184 DOI: 10.1615/IHMTC-2023.300

The Dynamics of Distributed Thermals Anjanee Kumar, Kaustav Chaudhury pages 185-190 DOI: 10.1615/IHMTC-2023.310

Residence time method for the analysis of a model cooling process with noise Shivam Gupta, Kaustav Chaudhury pages 191-196 DOI: 10.1615/IHMTC-2023.320

Membrane-enhanced M-cycle coupled with VCRS for improved cooling Rishabh Srivastava, Ankush Kumar Jaiswal, Sunil Kumar Trupati, Sarun Kumar Kochunni, Jaichander Swaminathan pages 197-202 DOI: 10.1615/IHMTC-2023.330

Considerations for ab-initio based thermal conductivity prediction of ThO₂ Nidheesh Virakante, Ankit Jain pages 203-207 DOI: 10.1615/IHMTC-2023.340

A Numerical Study on Enhancing Lithium-ion Battery Cooling through Phase Change Material Filled in Mini-Chambers Indra Kumar Lokhande, Nishant Tiwari pages 209-214 DOI: 10.1615/IHMTC-2023.350

Radiant Air-Cooling Strategies for Medium Scale Buildings using Vapour Absorption and Cooling Towers Shubham Kumar, Gaurav Singh, Ranjan Das pages 215-220 DOI: 10.1615/IHMTC-2023.360

Effect of Additives on the Extinction of Solid Rocket Propellants Ritesh Dubey, Rajiv Kumar pages 221-227 DOI: 10.1615/IHMTC-2023.370

Mathematical analysis of personalized air conditioning and ventilation system Snehangshu Mondal, Maddali Ramgopal, Siddhartha Mukhopadhyay pages 229-234 DOI: 10.1615/IHMTC-2023.380

Influence of Prandtl number on closed cavity convective flow structures formed adjacent to an anti-symmetrically heated cylinder pair Ritwik Kumar, Sayantan Sengupta pages 235-240 DOI: 10.1615/IHMTC-2023.390

Thickness Profile Measurement of a Nanofluid Thin Film Meniscus using Reflectometry Saumya Singh, Motilal Chavhan, Pawan Kumar Singh, Soubhik Kumar Bhaumik pages 241-246 DOI: 10.1615/IHMTC-2023.400

Numerical investigation of wedge geometry effects on snow accumulation Keerthana Raghu, Deepu M, Shine S. R pages 247-252 DOI: 10.1615/IHMTC-2023.410

Predicting the Nusselt Number of Parallel Microchannel and Oblique Pin-Fin Heat Sinks Using a Machine Learning Approach Mathiyazhagan Shanmugam, Lakshmi Sirisha Maganti pages 253-257 DOI: 10.1615/IHMTC-2023.420

Experimentally Validated Thermal Model for Heat Transfer Through Structural Mounting of a Launch Vehicle Reji Joseph, Sharmistha Choubey, Akula Akhil Praveen, Jophy Peter pages 259-264 DOI: 10.1615/IHMTC-2023.430

Numerical Modelling of Joule Melter for Waste Vitrification to Analyze it's Electrical and Thermal Characteristics Harikrishnan V, Vikas Kumar Mishra, P. Mangarjuna Rao pages 265-270 DOI: 10.1615/IHMTC-2023.440

Numerical analysis of liquid desiccant regenerator with corrugated surface Mrinal Pradhan, Koushik Das, Rajat Subhra Das pages 271-276 DOI: 10.1615/IHMTC-2023.450

Performance Enhancement of Cylindrical Heat Pipe using Tapered Wick Pratit Sunder Dev Roy, Koushik Das, Hriday Mani Kalita pages 277-282 DOI: 10.1615/IHMTC-2023.460

On the three-dimensionality aspect of flows through sudden expansion Nandan Sarkar, Alok Mishra, Somnath Roy pages 283-287 DOI: 10.1615/IHMTC-2023.470

On the suitability of an electron beam evaporator as a lutetium atom source Nagaraj Alangi, Anik Mazumder, Sanjay Sethi pages 289-294 DOI: 10.1615/IHMTC-2023.480

On the Performance of THINC-scaling CLSVOF Scheme for Two-Phase Flows Orkodip Mookherjee, Shantanu Pramanik, Atul Sharma pages 295-300 DOI: 10.1615/IHMTC-2023.490

Effect of inclination of steam injection pipe on steam bubble profile and frequency characteristics in direct contact condensation Saurabh Patel, Parmod Kumar pages 301-306 DOI: 10.1615/IHMTC-2023.500

Performance evaluation of a large, centrally conditioned classroom complex with an energy recovery system for hot and humid climates Deen Bandhu, Maddali Ramgopal pages 307-312 DOI: 10.1615/IHMTC-2023.510

Analysis of Fluid Flow through a Channel with Porous Patches: A resistance-based approach Sanu Adhikary, Bharat Soni, Ameeya Kumar Nayak pages 313-317 DOI: 10.1615/IHMTC-2023.520

Influence of Fahraeus-Lindqvist Effect on Blood Flow Resistance: An Analytical Approach Manoj Mahawar, Bharat Soni, Ameeya Kumar Nayak pages 319-323 DOI: 10.1615/IHMTC-2023.530

Natural convection in a square cavity filled with low Pr materials : studies using transition SST model Satyajit Das Karmakar, Prasun Dutta, Himadri Chattopadhyay pages 325-330 DOI: 10.1615/IHMTC-2023.540

Impedance of Peristaltic Flow for Low Reynolds Number Manav Dharewa, Bharat Soni, Ameeya Kumar Nayak pages 331-336 DOI: 10.1615/IHMTC-2023.550

Entropy Generation in the Human Molar Tooth Abhijit Dutta, Himadri Chattopadhyay pages 337-341 DOI: 10.1615/IHMTC-2023.560

CONJUGATE HEAT TRANSFER SIMULATION OF A HIGH-PERFORMANCE COMPUTING SERVER Mohan N. Labade, Vikas Kumar, Mangesh B. Chaudhari, Mohammad Asif Sultan pages 343-349 DOI: 10.1615/IHMTC-2023.570

Analytical Design and Computational Analysis on Mixing Duct of a Gas Generator Test Rig Jetty. Dindiba Phanikumar, Govindaraj Muthuselvan, Muralidhara HS, Jeyaseelan AR, Rajeshwari N, Shambhoo Yadav, Ashish Vishnu Shelke, Antonio Davis pages 351-357 DOI: 10.1615/IHMTC-2023.580

Vortex Interactions in Turbulent Flow through 90-degree Bend Pipe: A Parametric Study Adarsh Vasa, Kaustav Chaudhury pages 359-365 DOI: 10.1615/IHMTC-2023.590

Velocity measurements inside a hydrocyclone using particle image velocimetry (PIV) Chandranath Banerjee, Kaustav Chaudhury, Emmanuel Cid, Eric Climent, Arun Kumar Majumder pages 367-372 DOI: 10.1615/IHMTC-2023.600

Compressible Multiphase Flow Modelling and Experimental Validation of Film Cooling Effectiveness for a Rocket Thrust Chamber with Ablative Nozzle Mansu Navaneethan, Thirumalachari Sundararajan, K Srinivasan, T. Jayachandran pages 373-378 DOI: 10.1615/IHMTC-2023.610

Performance analysis of a hybrid air conditioning system for hot and humid climates Sobiya Maqbool, Ramgopal Maddali pages 379-384 DOI: 10.1615/IHMTC-2023.620

Investigation of micro channelled cooling plate on the thermal behaviour of li-ion battery module Kokkula Monika, Chanchal Chakraborty, Sounak Roy, Srikanta Dinda, Satyapaul A. Singh, Santanu Prasad Datta pages 385-390 DOI: 10.1615/IHMTC-2023.630

Development of an Interpolated RANS-LES Solver for Turbulent Heat Transfer Niladri Sekhar Panda, Amitabh Bhattacharya, Anupam Dewan pages 391-396 DOI: 10.1615/IHMTC-2023.640

Energy and Exergy Performance Emulation of a Novel Ejector-Integrated Organic Rankine Cycle-Driven Tri-Generation System for CCHP Ronanki Suresh, Joshua Kumar Saladi, Santanu Prasad Datta pages 397-402 DOI: 10.1615/IHMTC-2023.650

Energy Exergy analysis of Solar parabolic trough collector Joshua Kumar Saladi, Ronanki Suresh, Santanu Prasad Datta pages 403-408 DOI: 10.1615/IHMTC-2023.660

Studies on CO₂ based two-phase natural circulation loop Krushna Mohan Das, Abhijit Guha, Maddali Ramgopal pages 409-415 DOI: 10.1615/IHMTC-2023.670

Numerical Analysis of Latent Heat Storage System for Industrial Process Heat using Phase Change Material for Medium Temperature Range Kulbhushan Yadav, Manish Agrawal, Himanshu Tyagi pages 417-422 DOI: 10.1615/IHMTC-2023.680

3D CFD Investigation on Trimmed Annular Fins in Crossflow Heat Exchanger Mohit Raje, Amit Dhiman pages 423-427 DOI: 10.1615/IHMTC-2023.690

Effect of aspect ratio on heat transfer in rotating Rayleigh-Benard convection at low Rayleigh number Vinay Kumar Tripathi, Pranav Joshi pages 429-434 DOI: 10.1615/IHMTC-2023.700

Analysing the Effect of Neighbouring Droplets on the Evaporation of Urea-Water-Solution Gourav Parmar, Madan Mohan A pages 435-440 DOI: 10.1615/IHMTC-2023.710

Investigation on Atomization Characteristics of the 3D Printed and Conventional Swirl Coaxial Injector Muthukumaran. C. K, Ashish Kumar, Vikash Kumar, Assiz. M. P, John Tharakan. T pages 441-445 DOI: 10.1615/IHMTC-2023.720

Exploring the Use of Nano-Enhanced Phase Change Material for Vaccine Cold Storage: An Experimental Study Anto Zacharias, Akash James, Rahul E R, Sanjay K V, Yadhu Krishna, Rajesh Baby pages 447-452 DOI: 10.1615/IHMTC-2023.730

Thermal management of Li-ion Pouch Cell under actual discharge condition using Phase Change Materials Hemanth Dileep, Jitendra Kumar Singh, Kaushal Kumar Jha, Pallab Sinha Mahapatra, Arvind Pattamatta pages 453-458 DOI: 10.1615/IHMTC-2023.740

CFD analysis of an extruder die at cryogenics temperature Shashi Kant Verma pages 459-463 DOI: 10.1615/IHMTC-2023.750

Calculation of spectral radiative properties of fly ash and radiative heat transfer Kapilkumar Patil, Kuljeet Singh, Pradeep Kumar pages 465-470 DOI: 10.1615/IHMTC-2023.760

Comparative study on Multiphase Dynamics of Unsteady Film Condensation over a Vertical Plate in different regimes Shiva N, Nilojendu Banerjee, Satyanarayanan Seshadri pages 471-476 DOI: 10.1615/IHMTC-2023.770

Numerical Simulations of Y-Channel Combustor using the k - ε RANS Model Keshav Verma, Parmod Kumar pages 477-482 DOI: 10.1615/IHMTC-2023.780

Droplet Impact on paper − morphology and splash pattern Santhosh SP, Abhiram Ramachandran, Kiran Raj M pages 483-486 DOI: 10.1615/IHMTC-2023.790

An Accurate Lumped Electro-Thermal Model for a Full Battery Pack Anil Wakale, Xiao Hu, Omkar Chamhekar pages 487-496 DOI: 10.1615/IHMTC-2023.800

Numerical study for the Evaluation of Radiation Efficiency of Wood Volatile Combustion in a Two-Layer Porous Radiant Burner Prabhakar Zainith, Niraj Kumar Mishra pages 497-502 DOI: 10.1615/IHMTC-2023.810

Self-evaporation and tank pressure evolution in a liquid hydrogen tank during a short-term orbital mission: A hybrid modeling approach Vishnu Viswanath, Deepak Kumar Agarwal, T. John Tharakan, S. Sunil Kumar pages 503-508 DOI: 10.1615/IHMTC-2023.820

Numerical Validation of Lee's Evaporation Model for Heat Pipe Applications Surendra Singh Rathore, Balkrishna Mehta, Pradeep Kumar, Mohammed Asfer pages 509-514 DOI: 10.1615/IHMTC-2023.830

EFFECT OF PERFORATIONS IN DOUBLE TWISTED TAPE INSERTS FITTED IN CYLINDRICAL TUBE HEAT EXCHANGER Bipin Kumar, Anil Kumar Patil, Manoj Kumar pages 515-521 DOI: 10.1615/IHMTC-2023.840

Effect of the transverse channel on the performance of microchannel heat sink Rajalingam A, Shubhankar Chakraborty pages 523-528 DOI: 10.1615/IHMTC-2023.850

Delayed Condensation on Nanoparticle Coated Transparent Lubricant-Infused Surfaces N Rahul, Nirbhay Kumar, Soumyadip Sett pages 529-534 DOI: 10.1615/IHMTC-2023.860

Particle cloud patterns in Rayleigh-Benard convection Thota Srinivas, Gaurav Tomar pages 535-540 DOI: 10.1615/IHMTC-2023.870

A novel corona wind-based battery thermal management system Rishav Kumar, Pradipta Kumar Panigrahi pages 541-546 DOI: 10.1615/IHMTC-2023.880

Effect of Cyclic Exponential Heat Flux-based Power Transients on Bubble Coalescence in Nucleate Pool Boiling Nipun Kothare, Sanjid C S, Janani Srree Murallidharan, Atul Sharma pages 547-552 DOI: 10.1615/IHMTC-2023.890

Modelling the Thermal Degradation of Forest Litter Beds Siddhi Marathe, Hrishikesh Gaikwad, Amit Kumar pages 553-558 DOI: 10.1615/IHMTC-2023.900

Application of the Distributed Physics Informed Neural Networks in approximating solutions to multi-phase flow problems Gokul R, Balaji Srinivasan, Arvind Pattamatta pages 559-566 DOI: 10.1615/IHMTC-2023.910

Numerical study of natural convection heat transfer using interrupted branching fins on radial heat sinks for LED cooling Trailokya Lochan Tripathy, Sukanta Kumar Dash pages 567-572 DOI: 10.1615/IHMTC-2023.920

Enhancing the Performance of Hybrid Photovoltaic Thermal Collectors (HPVTC): Numerical Investigation of the Impact of Inclination Angle and Reynolds Number Anjan Nandi, Samarendu Biswas, Nirmalendu Biswas, Dipak Kumar Mandal, Nirmal Kumar Manna pages 573-578 DOI: 10.1615/IHMTC-2023.930

Unraveling Vortex Interactions in Vibrating Tandem Diamond Cylinders Kumar Sourav, Deepak Kumar pages 579-584 DOI: 10.1615/IHMTC-2023.940

Spatiotemporal Dynamics of Merging Flames: Experiments and Spectral Proper Orthogonal Decomposition Analysis Subrata Dutta, Arnab Chakraborty, Auronil Mukherjee, Sirshendu Mondal pages 585-590 DOI: 10.1615/IHMTC-2023.950

Topology Optimization and Thermal-Structural Finite Element Simulation of Metal Additive Manufacturing Process (LPBF) on Inconel 718 Debajyoti Adak, Somnath Roy, Ganesh Balasubramanian pages 591-597 DOI: 10.1615/IHMTC-2023.960

INFLUENCE OF SEMI-CLOSED MICROSTRUCTURE ON LOWER ONSET WALL-SUPERHEAT OF A 2×3 TUBE BUNDLE UNDER POOL BOILING CONDITION Subhakanta Moharana, Niloy Laskar, Mihir Kumar Das pages 599-603 DOI: 10.1615/IHMTC-2023.970

Effect of change in port shape on the performance of a hybrid rocket motor Gyandeep, Rajiv Kumar pages 605-611 DOI: 10.1615/IHMTC-2023.980

Experimental studies on local heat transfer characteristics in annular channel flows with wire coils as turbulence promoters Mantri Sandeep Kumar, Satyanand Abraham pages 613-618 DOI: 10.1615/IHMTC-2023.990

Heat transfer and flow characteristics in square and filleted square channels rotating about a parallel axis S. Ananth Narayan, Satyanand Abraham pages 619-624 DOI: 10.1615/IHMTC-2023.1000

Experimental Studies on Pintle Injector in Hybrid Rocket Engine Arpit Dubey, Rajiv Kumar, Shelly Biswas pages 625-631 DOI: 10.1615/IHMTC-2023.1010

Experimental investigations on fixed and sensor-based single-axis and dual-axis solar tracking systems of solar cooker for sustainable development of rural Bihar Prabhansu, Mukesh Kumar, Prakash Chandra pages 633-638 DOI: 10.1615/IHMTC-2023.1020

Computational Analysis of Coolant Flow in Packed Bed for VHTR Design: Investigation of Thermal-Hydraulic Characteristics using OpenFOAM Pratyush Kumar, Sandip Kumar Saha, Atul Sharma pages 639-644 DOI: 10.1615/IHMTC-2023.1030

Partitioning of Heat Fluxes to Lumped Body Engulfed in Double Pool Fires Vikas R, Siva K Bathina, Sudheer Siddapureddy pages 645-650 DOI: 10.1615/IHMTC-2023.1040

Investigation of F- Shape Manifold for Air-Hydrogen Mixing Affected by EGR in Twin Cylinder, CRDi, Dual-Fuel Diesel Engine Hira A, Kumar M, Pasi DS, Prasad RK, Chandekar AC, Debnath BK pages 651-656 DOI: 10.1615/IHMTC-2023.1050

Investigations on Thermal Characteristics of Aramid Fibre Insulation Rajat Joshi, Sudheer Siddapureddy pages 657-662 DOI: 10.1615/IHMTC-2023.1060

A 3D Numerical Approach for a Microchannel Flow Characteristics under an Acoustic Field Ankit Kumar, Pawan Kumar Singh, S. Narayanan pages 663-668 DOI: 10.1615/IHMTC-2023.1070

Numerical heat transfer investigation on solid-solid phase change material compositebased plate-fin heat sink for thermal management of electronic package Midhun V C, Mayank Maroliya, Sandip Kumar Saha pages 669-674 DOI: 10.1615/IHMTC-2023.1080

Numerical Study of an Improved Mechanical Seal Design by Introducing a Groove Harpal Singh, Sandip Kumar Saha pages 675-680 DOI: 10.1615/IHMTC-2023.1090

Design Verification of an Inverted Conical Slosh Suppression Baffle of an Oxidiser tank of an Inter-planetary mission through CFD Simulations Kodati Srinivas, Sarath Chandran Nair S, Vasudevan R, A. K. Asraff pages 681-686 DOI: 10.1615/IHMTC-2023.1100

Thermal Analysis of Effect of Thermal Emissivity Enhancement on Cooling of Photovoltaic Solar Cell: A Numerical Study Shubham Kumar, Manish Agrawal, Himanshu Tyagi pages 687-692 DOI: 10.1615/IHMTC-2023.1110

Reconstruction of the temperature field using the data points at boundary using Physics-informed neural network Nagendra Kumar Chaurasia, Shubhankar Chakraborty pages 693-698 DOI: 10.1615/IHMTC-2023.1120

Flame Spread over Thin Circular Duct Vipin Kumar, Kambam Naresh, Amit Kumar, Payal Sharma, Akash Gupta pages 699-704 DOI: 10.1615/IHMTC-2023.1130

Thermal Hydraulics of Intermediate Heat Exchangers for SFRs Amit Kumar Chauhan, M. Rajendrakumar, K Natesan pages 705-710 DOI: 10.1615/IHMTC-2023.1140

Experimental Investigation on Heated Pipe under Spray Cooling Mahesh N Malage, Onkar S. Gokhale, Mithilesh Kumar , Dharmanshu Mittal pages 711-716 DOI: 10.1615/IHMTC-2023.1150

OpenFOAM simulation and development of a prototype Swiss-Roll Combustor for Methane Reforming Ajith U K Nair, Krishna Sesha Giri pages 717-722 DOI: 10.1615/IHMTC-2023.1160

Comparative Study of Solid-Solid and Solid-Liquid Phase Change Materials for a Pin-Finned Heat Sink in Avionics Thermal Management Mayank Maroliya, Midhun V C, Sandip Kumar Saha pages 723-728 DOI: 10.1615/IHMTC-2023.1170

Performance Analysis of Thermosyphon using Different Working Fluids Jeet N. Hadavani, Kalpak Sagar, Milan Vachhani, Vipul M. Patel, Hemant B. Mehta pages 729-735 DOI: 10.1615/IHMTC-2023.1180

CFD analysis of natural convection in parabolic enclosure Abhishek Raj, Manish Kumar Jaisal, Nishant Singh, Shalendra Kumar, Ram Vinoy Sharma pages 737-742 DOI: 10.1615/IHMTC-2023.1190

Thermal Management of Electronic packages using Al₂O₃/water Nanofluid as Coolant in microchannel heat sink Devisingh Rawat, Tanuja Sheorey pages 743-748 DOI: 10.1615/IHMTC-2023.1200

Numerical Study of Sub-cooled Flow Boiling towards High Void Fraction Flow Regimes using Coupled Wall Boiling and Population Balance Model Sachin Tom, Atul Srivastava pages 749-754 DOI: 10.1615/IHMTC-2023.1210

Thermoregulatory Responses during Postmortem State and Hemorrhage G Naveen , M. K. Chithramol , S R Shine pages 755-760 DOI: 10.1615/IHMTC-2023.1220

Thermo-fluid-dynamics of small hot cylindrical objects levitating over liquid pools Gaurav Shakya, Purbarun Dhar, Prasanta Kumar Das pages 761-766 DOI: 10.1615/IHMTC-2023.1230

Role of casting speed on temperature distribution and turbulent flow in twin roll casting restrained by proposed heat transfer boundary and Scheil's cooling condition Akshay Soni, Swarup Bag, P S Robi pages 767-772 DOI: 10.1615/IHMTC-2023.1240

Dispersion of Cough Droplets in an Enclosed Environment − Effect of Ambient Airflow Ankur Kumar, Vivek Chauhan, Anubhav Sinha pages 773-778 DOI: 10.1615/IHMTC-2023.1250

Effect of the shapes of the multiple impinging air jets on the heat transfer rate H.I. Shaikh, Sudheer Siddapureddy, Santosh V. Prabhu pages 779-783 DOI: 10.1615/IHMTC-2023.1260

Implementation of spectral line weighted-sum-of-gray-gases (SLW) property model in open source software Nishad Mahajan, Arumugaraj S., Pradeep Kumar pages 785-790 DOI: 10.1615/IHMTC-2023.1270

Experimental and Numerical analysis of Ferrofluid in Partially Heated Transparent Enclosure Microchannel under a Non-Uniform Magnetic field generated by Single, Double, and Circular Ring permanent magnet Ramesh Kumar, Sushil Kumar Dhiman pages 791-796 DOI: 10.1615/IHMTC-2023.1280

Study of Natural Convection in Corner Melting of Low Prandtl Number Materials using Modified Lattice Boltzmann Method Runa Samanta, Himadri Chattopadhyay pages 797-802 DOI: 10.1615/IHMTC-2023.1290

Deployment of fins for augmentation in heat exchange capacity of annular flows Prabhav Agrawala, Amit Arora, Yatharth Lilhare pages 803-808 DOI: 10.1615/IHMTC-2023.1300

Numerical Simulation of Blood Plasma Separation in a Bended-bifurcated Microchannel Shivji Prasad Yadav, Atul Sharma, Amit Agrawal pages 809-814 DOI: 10.1615/IHMTC-2023.1310

Understanding the Thermodynamic and Kinetic behavior of the Dehydrogenation process of Liquid Organic Hydrogen Carrier (Methylcyclohexane-Toluene) at high pressure Aniket Singh, Dhiraj Kumar Mahajan, Himanshu Tyagi pages 815-820 DOI: 10.1615/IHMTC-2023.1320

Study of Different Flow Configurations of Radial Flow Annular Reactor for Thermochemical Energy Storage Ankush Shankar Pujari, Rudrodip Majumdar, Chandramouli Subramaniam, Sandip Kumar Saha pages 821-826 DOI: 10.1615/IHMTC-2023.1330

Experimental Investigation of Stratified Sensible Thermal Energy Storage Using Silicone Oil Anas A.E Ahmed, Rudrodip Majumdar, Sandip Kumar Saha pages 827-832 DOI: 10.1615/IHMTC-2023.1340

Search for suitable artificial surfaces to predict health of a plant Rather Laasani Sanya Shabir, Navneet Kumar pages 833-838 DOI: 10.1615/IHMTC-2023.1350

Prandtl-number effects and correlation for axisymmetric jet impinging on flat surface Nithyanandham G, Jayavel S pages 839-845 DOI: 10.1615/IHMTC-2023.1360

Enhancement of Free Convective Heat Transfer Inside an Enclosure with Discrete Heat Sources Reesav Barik, Parvez Alam, Gyanesh Kumar, Umesh Madanan pages 847-852 DOI: 10.1615/IHMTC-2023.1370

Maximum Power Operation Of A Supercritical Carbon Dioxide Simple Recuperated Brayton Power Block Shrey Sahai Gupta, Pramod Kumar pages 853-858 DOI: 10.1615/IHMTC-2023.1380

Gradients-based diagnostics of nucleate pool boiling phenomena under atmospheric and sub-atmospheric conditions Bor Abubakr, Alok Kumar, Atul Srivastava pages 859-864 DOI: 10.1615/IHMTC-2023.1390

Simulation of Operational Transients Performed During Startup Tests of Superphénix Reactor Using PINET Code Iniya Adhithya J, Jonish Abisheck J, G Vikram, Amit Kumar Chauhan, M. Rajendrakumar, K Natesan pages 865-870 DOI: 10.1615/IHMTC-2023.1400

Experimental and numerical study of air-entrained patterns in liquid extraction using two outlets Rahul Kumar Mondal, Kanika Thakur, Lokesh Rohilla, Parmod Kumar pages 871-876 DOI: 10.1615/IHMTC-2023.1410

Flow Visualization study on a NACA0020 airfoil with sinusoidal tubercles using photo luminescence particles Udaya Karthik B S, B Sudarshan, Sanat J Kumar, Pratik Agarwal pages 877-881 DOI: 10.1615/IHMTC-2023.1420

Two frequency excitation of Faraday waves in a cylindrical container Sadham Usean Ramasamy, Shyama Prasad Das, Shaligram Tiwari pages 883-888 DOI: 10.1615/IHMTC-2023.1430

Heat Transfer Enhancement in the Internal Convection Cooling of Gas Turbine Blades With Compound V Ribs and Spherical Dimples Arrangements Ajmit Kumar, Manabendra Pathak pages 889-894 DOI: 10.1615/IHMTC-2023.1440

Thermal and hydraulic performance analysis of radiator tubes at different angles Ram Mohan Gupta, Niraj Kumar Mishra, Vinod Singh Yadav, Prabhakar Zainith pages 895-900 DOI: 10.1615/IHMTC-2023.1450

Energy, Exergy, and Economic Assessments of Sky Radiative Cooling System Pandiyan Rajaiah, Praveen Kumar Govindasamy, Saravanan Rajagopal pages 901-905 DOI: 10.1615/IHMTC-2023.1460

An Experimental Investigation on Thermal Performance of Heat Pipe Motilal Chavhan, Pawan Kumar Singh, Saumya Singh pages 907-912 DOI: 10.1615/IHMTC-2023.1470

Quantifying transport and retention profile of contaminant plumes in a saturated porous medium Amita Singh, Chunendra K. Sahu pages 913-917 DOI: 10.1615/IHMTC-2023.1480

Understanding Behaviour of Double Diffusive Convection during Seawater Freeze Desalination Deven Patel, Virkeshwar Kumar, Sameer Khandekar pages 919-924 DOI: 10.1615/IHMTC-2023.1490

Numerical simulation of air-water two phase flow regimes in mini channel heat sink Kumari Deepika, Ashutosh Kumar, Pawan Kumar Singh pages 925-930 DOI: 10.1615/IHMTC-2023.1500

Thermal Optimization of MCHS with Conical Microfins using Non Dominating Sorting Genetic Algorithm (NSGA-II) Karan Dhuper, Lalit Kumar, Siddhartha Duttagupta pages 931-936 DOI: 10.1615/IHMTC-2023.1510

Numerical investigation on the effect of solid particle size and concentration in a polydisperse gas-solid multiphase flows Deboprasad Talukdar, Yujiro Suzuki pages 937-942 DOI: 10.1615/IHMTC-2023.1520

Numerical investigation of the influence of inner funnel offset and height reduction on a modified IRS device Aiswarya Unny, Devendra Kumar Patel pages 943-949 DOI: 10.1615/IHMTC-2023.1530

The effect of radial gap on the performance of an IRS device Maheswar Rout, Jnana Ranjan Senapati, Suman Ghosh pages 951-956 DOI: 10.1615/IHMTC-2023.1540

Assessment of Heat Removal Capability of Steel Containment by Passive Air Cooling Yogesh R. Pawar, Parimal P. Kulkarni, A.K. Dureja, A. K. Nayak pages 957-962 DOI: 10.1615/IHMTC-2023.1550

A Numerical study on the effect of solid boundaries on the density-driven laminar flows Himanshu Kishnani, Abhishek Kundu pages 963-968 DOI: 10.1615/IHMTC-2023.1560

Review of Recent Developments in Experimental Investigation of Forced Convective Heat Transfer in Molten Nitrate Salt Systems Pratik Punj, Abhijeet M. Vaidya, Ananta Borgohain, Sanjib Majumdar, S. K. Sinha pages 969-974 DOI: 10.1615/IHMTC-2023.1570

Design of an Energy-efficient Electrically-driven Environmental Control System in a Civil Aircraft Vinay Pratap Singh Negi, Chennu Ranganayakulu pages 975-980 DOI: 10.1615/IHMTC-2023.1580

Development and Characterization of a Solid-Solid-Phase Change Material for Low-Temperature Applications Goutam Nayak, Mayank Maroliya, Mohammed Qadeer, Midhun V C, Sandip Kumar Saha, Chandramouli Subramaniam pages 981-986 DOI: 10.1615/IHMTC-2023.1590

Effect of Variation of Water Depth on the Performance of a Double Slope Solar Still for Shillong Weather Condition − A CFD Study D Marwein , P Yadav , Biplab Kumar Debnath, Rajat Subhra Das pages 987-992 DOI: 10.1615/IHMTC-2023.1600

Postponement of dynamic Leidenfrost phenomenon during impact of Oil/water (O/W) Emulsions droplet Manjeet Meena, Gudlavalleti V V S Vara Prasad, Chandra Shekhar, Purbarun Dhar, Manigandan Sabapathy, Devranjan Samanta pages 993-996 DOI: 10.1615/IHMTC-2023.1610

Numerical investigation of a liquid metal MHD flow in a gradually expanded microchannel Rupesh Baroniya, Rahul Bisen, Narendra L. Gajbhiye, Rajesh Gupta pages 997-1002 DOI: 10.1615/IHMTC-2023.1620

CONVECTIVE HEAT TRANSFER IN LID DRIVEN POROUS CAVITY FILLED WITH TERNARY HYBRID NANOFLUIDS Bandaru Mallikarjuna, B V Rathish Kumar, G. Giridhar pages 1003-1009 DOI: 10.1615/IHMTC-2023.1630

Coupled vapor bubble and microlayer dynamics during nucleate flow boiling on nanocoated surfaces offering varying wettability Mohd Moiz, Mohammed Sameer, Atul Srivastava pages 1011-1016 DOI: 10.1615/IHMTC-2023.1640

Effect of Debye layer in electromigration Taylor dispersion A. Chatterjee, Ameeya Kumar Nayak pages 1017-1022 DOI: 10.1615/IHMTC-2023.1650

Exploring the Potential of Thermal Avalanche in Resistive Switching Memory Indranil Maity, Richa Bharti, A. K. Mukherjee, Ajay D. Thakur pages 1023-1025 DOI: 10.1615/IHMTC-2023.1660

Convective Heat Transfer In An Open Trapezoidal Cavity Below A Horizontal Channel Inscribed By Porous Media Champakumari M, Bandaru Mallikarjuna pages 1027-1032 DOI: 10.1615/IHMTC-2023.1670

NUMERICAL STUDY OF PULSATING HEAT PIPE UNDER ASYMMETRIC HEATING CONDITION Anoop Kumar Shukla, Vipin Bhardwaj, Subrata Kumar pages 1033-1038 DOI: 10.1615/IHMTC-2023.1680

Design options of solar receiver: A heat receiving system for solar thermal plant Mukesh Kumar, Bikash Jaiswal, P. K. Verma, D. K. Chandraker pages 1039-1043 DOI: 10.1615/IHMTC-2023.1690

High-Efficiency Hybrid Regenerator for Cryogenic Applications Using Additive Manufacturing K. V. Srinivasan, M. Arulprakasajothi, Vipin Bimalkumar Tiwari pages 1045-1048 DOI: 10.1615/IHMTC-2023.1700

THERMOPHYSICAL PROPERTY ESTIMATION OF ANISOTROPIC MATERIALS THROUGH INVERSE HEAT TRANSFER USING OPTIMIZATION ALGORITHMS Aswathy Mohan, Sivan Nair, Abhiram R Nair, Shivam Kumar, Samik Jash pages 1049-1054 DOI: 10.1615/IHMTC-2023.1710

A base-lag-mean (BLM) method for approximating the temperature rise in a swirl chamberbased inline water heater Suvechha Hota, Kaustav Chaudhury pages 1055-1058 DOI: 10.1615/IHMTC-2023.1720

Effect of solid wall on convective heat transfer in Taylor flow in microchannels Nishant Hinge, Shriram Joshi, Amol Deshpande, Raghvendra Gupta pages 1059-1064 DOI: 10.1615/IHMTC-2023.1730

Experimental investigation of shape evolution and contact angle measurement of droplets over the vibrating liquid surface Prashant Narayan Panday, Shreyansh Darshan, Prasanta Kumar Das, Aditya Bandopadhyay pages 1065-1070 DOI: 10.1615/IHMTC-2023.1740

Comparison of Atomization Characteristics of Methanol with Diesel fuel Injection in Isothermal Conditions: A Numerical Study Jaydeep Singh pages 1071-1076 DOI: 10.1615/IHMTC-2023.1750

Effect of different Stacking Arrangements of the Crates on Temperature Inhomogeneity inside the Cold Room: A Numerical Study Harshad Raghuwanshi, K R Aharwal, Narendra L. Gajbhiye pages 1077-1082 DOI: 10.1615/IHMTC-2023.1760

Fabrication and Characterization of Flexible Graphite-Copper Based Thermoelectric Devices Anil Pandya, Devang Anadkat, Shreya Dungani, Ajay D. Thakur, Anup V. Sanchela pages 1083-1086 DOI: 10.1615/IHMTC-2023.1770

Large Eddy Simulation of Mixed Convection Heat Transfer for Turbulent Channel Flow Sourabh Kumar, Balachandran Premachandran pages 1087-1092 DOI: 10.1615/IHMTC-2023.1780

Co-gasification performance study of high ash Indian Coal and Rice husk blends in different proportion in Fluidised bed Gasifier Ankit Kumar, Rakesh Kumar, Prakash D Chavan pages 1093-1098 DOI: 10.1615/IHMTC-2023.1790

Heat Conduction Through Eccentric Hollow Prismatic Cylinders Manoj Kumar Moharana pages 1099-1103 DOI: 10.1615/IHMTC-2023.1800

A comparison of auto-ignition characteristics of alkanes, alkenes, and alcohols ranging from C₁ to C₃ Vaibhav Pathak, Snehasish Panigrahy pages 1105-1110 DOI: 10.1615/IHMTC-2023.1810

Performance Analysis of Packed Bed Rectangular Duct and Comparison with Empty and Finned Duct Suhas Jagtap, Manish Mishra pages 1111-1117 DOI: 10.1615/IHMTC-2023.1820

Breakup dynamics of a droplet under the combined influence of pressure driven flow and transverse alternating electric field within a microchannel Satya P. Pandey, Sandip Sarkar, Debashis Pal pages 1119-1124 DOI: 10.1615/IHMTC-2023.1830

A Novel Bi-Facial Hybrid Wick Approach for Enhanced Solar-Vapor Conversion Efficiency Debartha Chatterjee, Sameer Khandekar pages 1125-1129 DOI: 10.1615/IHMTC-2023.1840

Investigation of Thermal Performance of Minichannel with Slot in Parallel and Counter Flow Configuration Vanam Nagendra, Boddeti Jagadish, Dr.Ch Sampath Kumar pages 1131-1136 DOI: 10.1615/IHMTC-2023.1850

Impact of Micropin-Fin Array Shape on Intra-Chip Microfluidic Cooling with Non-uniform Power Dissipation Map Chinmaya Kumar Patra, Anandaroop Bhattacharya, Prasanta Kumar Das pages 1137-1142 DOI: 10.1615/IHMTC-2023.1860

Numerical investigation of non-uniform fins in pipe flows and effect of fin truncation Prabhav Agrawala, Amit Arora pages 1143-1148 DOI: 10.1615/IHMTC-2023.1870

A Numerical study on Thermal Management of Electronic Components using a Liquid Metal and Phase Change Materials Mudit Gupta, Ippaka Naveen Kumar, Chinige Sampath Kumar pages 1149-1154 DOI: 10.1615/IHMTC-2023.1880

Analysis of Droplet Generation Process by Liquid Jet Impingement on Solid Surface Pertaining to Sodium Spray Fire Event in SFR S. Muthu Saravanan, P. Mangarjuna Rao, B. Venkatraman pages 1155-1160 DOI: 10.1615/IHMTC-2023.1890

Thermal management of high heat flux electronics subjected to power surge using a double layered wavy minichannel K.Naga Vasista, Sayan Majumder, Chakravarthy Balaji pages 1161-1167 DOI: 10.1615/IHMTC-2023.1900

Validation of hypersonic CFD solver hy2FOAM with emphasis on the need for modelling chemical non-equilibrium Aditya Kumar, Shubham Kumar, Ashwani Assam pages 1169-1175 DOI: 10.1615/IHMTC-2023.1910

Electro-Thermal Characteristics of Loop Heat Pipe based BTMS: An Experimental Investigation Hemantkumar B. Mehta, Durga Nand Jha, Milan Vachhani, Vipul M. Patel, Kalpak Sagar pages 1177-1182 DOI: 10.1615/IHMTC-2023.1920

Performance validation of Battery Thermal Control of a typical mini Satellite during Thermovac Test and In-Orbit Tina Thomas, Raghavendra Kumar, Dhananjay W. Tijare, Arjun Dey pages 1183-1187 DOI: 10.1615/IHMTC-2023.1930

Enhancement in thermal management of electronic devices using thermosyphon assist phase change material: An experimental study Gopi Kannan K, Vinoth Kumar P, Pawan Kumar Singh pages 1189-1194 DOI: 10.1615/IHMTC-2023.1940

Performance study of Aluminized Mylar as Multi-Layer Insulation in an Indigenously Developed Cryogenic Dewar Vessel Shrabani Ghosh, Swapan Chandra Sarkar pages 1195-1200 DOI: 10.1615/IHMTC-2023.1950

Experimental Investigation on Effect of Heterogeneous Wettable Structures on Condensation Heat Transfer Ashish Chandran K, Harendra B. Rathod, Sujith Kumar C S pages 1201-1206 DOI: 10.1615/IHMTC-2023.1960

Thermal Characterisation of a Phase Change Interface under Directional Exponential Heating Vinay D. Patel, R.S. Maurya pages 1207-1212 DOI: 10.1615/IHMTC-2023.1970

Investigation of Failure Prevention Study of Coronary Artery Bypass Grafting Using Computational Fluid Dynamics Approach Adarsha Narayan Mallick, Mukesh Kumar, Rahul Nadda, K Manoj Kumar, Sarju Ralhan, Bishav Mohan, Ramjee Repaka, Ashish Sahani pages 1213-1219 DOI: 10.1615/IHMTC-2023.1980

Thermal Mass-Based Measures for Thermal Load Reduction of a Tropical Building Arun Kumar Shukla, Ashwini Kumar Yadav, Ravi Prakash pages 1221-1226 DOI: 10.1615/IHMTC-2023.1990

Evaluation of Elastic Modulus of Hydrogel as a Function of Water Content Khashti Datt Pandey, Yuvraj D. Kamble, Atul Thakur, Ajay D. Thakur pages 1227-1230 DOI: 10.1615/IHMTC-2023.2000

Comparative energy-exergy analysis of ejector integration in ORC by optimization method for ultra-low to medium temperature heat sources Mayank Srivastava, Jahar Sarkar, Arnab Sarkar pages 1231-1236 DOI: 10.1615/IHMTC-2023.2010

Evaluation of Molten Fuel Droplets Size Distribution in a Fuel Bubble under Energetic CDA in SFR B. Thilak, P. Mangarjuna Rao, B. Venkatramanan pages 1237-1242 DOI: 10.1615/IHMTC-2023.2020

Combustion Instability Analysis in Rotating Detonation Engine Using Dynamic Mode Decomposition Sumer B. Dirbude, Shahul H V, Niveditha K V V S K pages 1243-1248 DOI: 10.1615/IHMTC-2023.2030

Experimental Study of Heat Transfer Enhancement using Delta Wing Vortex Generators in a Rectangular Channel with Pin Fins Amit, Rajendra P. Vedula pages 1249-1254 DOI: 10.1615/IHMTC-2023.2040

Experimental study on U, I and Z flow configuration-based microchannel cold plate for nonuniform heat loads Mathiyazhagan Shanmugam, Manikanta Bandlamudi, Lakshmi Sirisha Maganti pages 1255-1260 DOI: 10.1615/IHMTC-2023.2050

Solar Radiation Absorption and Thermo-Mechanical Analysis of Porous Absorbers Sonika Sharma, Abhishek Sit, Prabal Talukdar pages 1261-1266 DOI: 10.1615/IHMTC-2023.2060

Electroosmotic flow and micromixing of Carreau fluid in a nozzle-diffuser shaped microchannel connected with a microchamber Subhajyoti Sahoo, Ameeya Kumar Nayak pages 1277-1282 DOI: 10.1615/IHMTC-2023.2070

Computational Analysis of Afterburner Models with Convergent Divergent Nozzle for Different Combustion Chamber Lengths Srinivasa Rao Gurrala, Sanjay Singh Rawat, SAR Kabir, Danda Aman Kumar pages 1283-1288 DOI: 10.1615/IHMTC-2023.2080

Common Heat Exchanger Section of a Coupled Natural Circulation Loop: 1-D Modelling of the Influence of Wall Conduction and Inclination on the Dynamics of Component Loops Prasanth Subramaniyan, Shivangi Tiwari, Akhil Dass , Sateesh Gedupudi pages 1289-1294 DOI: 10.1615/IHMTC-2023.2090

CFD Analysis of microchannel nanofluid cooled lithium-ion battery thermal management system applying MSMD model Kartik Kumar, Jahar Sarkar, Swasti Sunder Mondal pages 1295-1300 DOI: 10.1615/IHMTC-2023.2100

Thermal Performance of Sawtooth and Photovoltaic Roof Greenhouse in natural circulation mode for Tropical Climatic conditions Samar Singhal, Ashwini Kumar Yadav, Ravi Prakash pages 1301-1306 DOI: 10.1615/IHMTC-2023.2110

Experimental Investigation of Water Aided Concentrated Photovoltaic/Thermal System with Phase Change Material Rajat Kumar, Varun Goel, Brij Bhushan, Muneesh Sethi pages 1307-1312 DOI: 10.1615/IHMTC-2023.2120

Development of CFD based Models for Basic Configuration Cable Tray Fire Scenarios Pertaining to Safety of SFR Systems S. Muthu Saravanan, P. Mangarjuna Rao, B. Venkatraman pages 1313-1318 DOI: 10.1615/IHMTC-2023.2130

Transient simulation of sodium flow inside the primary sodium pumps of Future Indian Fast Breeder Reactors Rajendrakumar M, Natesan K, Devan K pages 1319-1324 DOI: 10.1615/IHMTC-2023.2140

CFD study of cavitation in the primary sodium pump of future indian fast reactors using Schnerr and Sauer Model Rajendrakumar M, Natesan K, Devan K pages 1325-1330 DOI: 10.1615/IHMTC-2023.2150

Effect of furnace heat flux on boiler evaporator downcomer circuit Bhaskar Halder, Md Naim Hossain, Koushik Ghosh pages 1331-1337 DOI: 10.1615/IHMTC-2023.2160

Towards enhanced cooling techniques in the reservoir section of a closed-loop liquid cooling system Rajiv Kumar, Anand Tripathi, Ashwani Assam pages 1339-1344 DOI: 10.1615/IHMTC-2023.2170

Thermal Balance test for SoLEXS instrument Veeresha D R, Akanksha Baggan, Nidhi Sharma, Srikanth T, Subramanya, Padmanabhan, Abhijit Avinash Adoni, Debasis Chakraborty pages 1345-1348 DOI: 10.1615/IHMTC-2023.2180